Author

Khaled A. Alhazza

Observed names: Alhazza, Khaled, K. A. Alhazza, K. Alhazza, KHALED ALHAZZA, Khaled A Alhazza, Khaled Alhazza, Khalid A. Alhazza

Institution: Kuwait University

Observed institutions: Kuwait University, Virginia Tech

ORCID: 0000-0001-7997-7778

Observed ORCID: 0000-0001-7997-7778

OpenAlex ID: A5000480610

A hybrid command-shaper for double-pendulum overhead cranes

2012 · Ziyad Masoud, Khaled Alhazza, et al. · Journal of Vibration and Control · 72

Frequency-Modulation Input Shaping Control of Double-Pendulum Overhead Cranes

2013 · Ziyad N. Masoud, Khaled A. Alhazza · Journal of Dynamic Systems Measurement and Control · 71

On utilizing delayed feedback for active-multimode vibration control of cantilever beams

2008 · Khaled A. Alhazza, Ali H. Nayfeh, et al. · Journal of Sound and Vibration · 70

Non-linear vibrations of parametrically excited cantilever beams subjected to non-linear delayed-feedback control

2008 · Khaled A. Alhazza, Mohammed F. Daqaq, et al. · International Journal of Non-Linear Mechanics · 59

Discrete-time command profile for simultaneous travel and hoist maneuvers of overhead cranes

2015 · Khaled A. Alghanim, Khaled A. Alhazza, et al. · Journal of Sound and Vibration · 44

A smooth multimode waveform command shaping control with selectable command length

2017 · Ziyad N. Masoud, Khaled A. Alhazza · Journal of Sound and Vibration · 36

Non-linear vibrations of cantilever beams with feedback delays

2008 · Mohammed F. Daqaq, Khaled A. Alhazza, et al. · International Journal of Non-Linear Mechanics · 36

Free vibrations control of a cantilever beam using combined time delay feedback

2011 · Khaled A Alhazza, Majed A Majeed · Journal of Vibration and Control · 34

A Smooth Wave‐Form Shaped Command with Flexible Maneuvering Time: Analysis and Experiments

2015 · Khaled Alhazza, Ziyad Masoud, et al. · Asian Journal of Control · 33

Adjustable maneuvering time wave-form command shaping control with variable hoisting speeds

2015 · Khaled A Alhazza · Journal of Vibration and Control · 32

An Iterative Learning Control Technique for Point-to-Point Maneuvers Applied on an Overhead Crane

2014 · Khaled A. Alhazza, Abdullah M. Hasan, et al. · Shock and Vibration · 29

PDF

On primary resonances of weakly nonlinear delay systems with cubic nonlinearities

2010 · Mohammed F. Daqaq, Khaled A. Alhazza, et al. · Nonlinear Dynamics · 29

Waveform command shaping control of multimode systems

2015 · Khaled A. Alhazza, Ziyad N. Masoud · Journal of Sound and Vibration · 25

Nonlinear vibrations of doubly-curved cross-ply shallow shells

2001 · K. Alhazza, A. Nayfeh · AIAA Applied Aerodynamics Conference · 25

PDF

A Novel Wave-Form Command-Shaping Control With Application on Overhead Cranes

2010 · Khaled A. Alhazza, Ziyad N. Masoud · ASME Dynamic Systems and Control Conference (DSCC) · 24

Adjustable-Smooth Polynomial Command-Shaping Control With Linear Hoisting

2018 · Khalid A. Alghanim, Majed A. Majeed, et al. · Journal of vibration and acoustics · 23

A Review of the Vibrations of Plates and Shells

2004 · K. A. Alhazza · The Shock and Vibration Digest · 22

Smooth and robust multi-mode shaped commands

2021 · Abdullah Alshaya, Khaled Alhazza · Mechanical Systems and Signal Processing · 20

A close-form command shaping control for point-to-point maneuver with nonzero initial and final conditions

2022 · Khaled A. Alhazza, Ziyad N. Masoud, et al. · Mechanical Systems and Signal Processing · 19

Nonlinear free vibration control of beams using acceleration delayed-feedback control

2007 · Khaled A Alhazza, Ziyad N Masoud, et al. · Smart Materials and Structures · 15

Frequency-modulation input shaping for multimode systems

2014 · Ziyad Masoud, Khaled Alhazza · Journal of Vibration and Control · 14

A Novel wave-form command shaper for overhead cranes

2013 · KHALED ALHAZZA, ZIYAD MASOUD · DOAJ (DOAJ: Directory of Open Access Journals) · 14

A Hybrid Command-Shaping Control System for Highly Accelerated Double-Pendulum Gantry Cranes

2009 · Ziyad N. Masoud, Khalid A. Alhazza, et al. · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · 12

A waveform command shaping control of a damped single degree-of-freedom crane system with nonzero initial conditions

2024 · Mohammed Alfares, Khaled Alhazza, et al. · International Journal of Dynamics and Control · 11

A Continuous Modulated Wave-Form Command Shaping for Damped Overhead Cranes

2011 · Khaled A. Alhazza, Asmahan H. Al-Shehaima, et al. · International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC) · 11

Works count: 69

Citation count: 881

H-index: 19

I10-index: 27