Get started
Author

Salim Chihaoui

Observed names: Chihaoui Salim, Chihaoui. Salim, S. Chihaoui
ORCID: 0000-0001-6461-4667
Observed ORCID: 0000-0001-6461-4667
OpenAlex ID: A5000563230
Modeling and optimization in turning of PA66-GF30% and PA66 using multi-criteria decision-making (PSI, MABAC, and MAIRCA) methods: a comparative study
2022 · Sabrina Haoues, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 34
PDF
Effects of tool materials and cutting conditions in turning of Ti-6Al-4V alloy: statistical analysis, modeling and optimization using CoCoSo, MABAC, ARAS and CODAS methods
2023 · Khaoula ABBED, Nabil Kribes, et al. · The International Journal of Advanced Manufacturing Technology · 25
Coated CBN cutting tool performance in green turning of gray cast iron EN-GJL-250: modeling and optimization
2021 · Salim Chihaoui, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 16
Parametric study and multi-criteria optimization during turning of X210Cr12 steel using the desirability function and hybrid Taguchi-WASPAS method
2022 · Khaoula Safi, Mohamed Athmane Yallese, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 13
Comparative assessment between DFA, NSGA-II coupled with TOPSIS, GRA, and TOPSIS for multiobjective optimization of gray cast iron turning process using CBN insert
2023 · Salim Chihaoui, Ikhlas Meddour, et al. · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · 7
Optimization of cutting parameters in hard machining of AISI 52100 with wiper and conventional ceramic insert using the DF, EDAS, and VIKOR methods
2025 · Bouchelaghem Hadjira, Mohamed Athmane Yallese, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 6
Experimental investigation on the performance of ceramics and CBN cutting materials during dry machining of cast iron: Modeling and optimization study using RSM, ANN, and GA
2023 · Boutheyna Gasmi, Mohamed Athmane Yallese, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 5
Statistical analysis, modeling and multi-objective optimization of parameters intermittent turning process of AISI D3
2023 · Fethi Khelfaoui, M. A. Yallese, et al. · JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES · 3
PDF
Long-range ultrasonic testing for corrosion detection in oil and gas pipelines: a case study
2026 · Gherdaoui. Hemza, Chihaoui. Salim, et al. · Insight - Non-Destructive Testing and Condition Monitoring
PDF
Mono and multi-objective optimisation in hard machining of DIN 100Cr6 with wiper ceramic insert using Taguchi, M-PCA, MOORA and DF methods
2026 · Chihaoui Salim, Alper Uysal, et al. · Engineering Research Express
Works count: 10
Citation count: 109
H-index: 6
I10-index: 4
Year
Topic
Type