Get started
Author

Nektarios K. Nasikas

Observed names: N. K. Nasikas, N.K. Nasikas, Nasikas, Nektarios K., Nektarios K Nasikas, Nektarios Nasikas, Νασίκας, Νεκτάριος, Νεκτάριος Νασίκας
Observed institutions: University of Patras, National Centre of Scientific Research "Demokritos", Hellenic Military Academy, FORTH Institute of Chemical Engineering Sciences, Institute of Nanoscience and Nanotechnology, Hellenic Foundation for Research and Innovation, University of California, Davis, Foundation for Research and Technology Hellas
ORCID: 0000-0003-0299-4857
Observed ORCID: 0000-0003-0299-4857
OpenAlex ID: A5000707113
Perovskite nanocrystals for energy conversion and storage
2018 · Athanasia Kostopoulou, Konstantinos Brintakis, et al. · Nanophotonics · 123
PDF
Photocatalysis as an advanced reduction process (ARP): The reduction of 4-nitrophenol using titania nanotubes-ferrite nanocomposites
2018 · Islam Ibrahim, Chrysoula Athanasekou, et al. · Journal of Hazardous Materials · 95
Glass formation and structure in the MgSiO3–Mg2SiO4 pseudobinary system: From degraded networks to ioniclike glasses
2009 · A. G. Kalampounias, N. K. Nasikas, et al. · The Journal of Chemical Physics · 75
Structural Characteristics of Novel Ca–Mg Orthosilicate and Suborthosilicate Glasses: Results from 29Si and 17O NMR Spectroscopy
2012 · N.K. Nasikas, T.G. Edwards, et al. · The Journal of Physical Chemistry B · 64
A Coherent Assessment of the Compressive Strain Rate Response of PC, PETG, PMMA, and TPU Thermoplastics in MEX Additive Manufacturing
2023 · Markos Petousis, Ioannis Ntintakis, et al. · Polymers · 47
PDF
Operational Performance and Energy Efficiency of MEX 3D Printing with Polyamide 6 (PA6): Multi-Objective Optimization of Seven Control Settings Supported by L27 Robust Design
2023 · Constantine David, Dimitrios Sagris, et al. · Applied Sciences · 43
PDF
Silicate Glasses at the Ionic Limit: Alkaline-Earth Sub-Orthosilicates
2011 · N. K. Nasikas, A. Chrissanthopoulos, et al. · Chemistry of Materials · 38
Structural investigations of the xTeO2–(1−x)GeO2 (x=0, 0.2, 0.4, 0.6, 0.8 and 1) tellurite glasses: A composition dependent Raman spectroscopic study
2011 · A.G. Kalampounias, N.K. Nasikas, et al. · Journal of Physics and Chemistry of Solids · 35
Structural Nature of Polyamorphism in Y 2 O 3 –Al 2 O 3 Glasses
2011 · N. K. Nasikas, S. Sen, et al. · Chemistry of Materials · 33
Critical quality indicators of high-performance polyetherimide (ULTEM) over the MEX 3D printing key generic control parameters: Prospects for personalized equipment in the defense industry
2024 · Nectarios Vidakis, Markos Petousis, et al. · Defence Technology · 30
Multifunctional HDPE/Cu biocidal nanocomposites for MEX additive manufactured parts: Perspectives for the defense industry
2024 · Nectarios Vidakis, Nikolaos Michailidis, et al. · Defence Technology · 30
Utilization of Silica Filler as Reinforcement Material of Polylactic Acid (PLA) in 3D Printing Applications: Thermal, Rheological, and Mechanical Performance
2024 · Vasileios Stratiotou Efstratiadis, Apostolos Argyros, et al. · Polymers · 28
Mechanical and Electrical Properties of Polyethylene Terephthalate Glycol/Antimony Tin Oxide Nanocomposites in Material Extrusion 3D Printing
2024 · Markos Petousis, Nikolaos Michailidis, et al. · Nanomaterials · 26
PDF
Engineering response of biomedical grade isotactic polypropylene reinforced with titanium nitride nanoparticles for material extrusion three-dimensional printing
2024 · Nikolaos Michailidis, Markos Petousis, et al. · European Journal of Materials · 21
Optimizing titanium carbide (TiC) ceramic nanofiller loading in isotactic Polypropylene for MEX additive manufacturing: Mechano-thermal and rheology aspects
2023 · Nectarios Vidakis, Markos Petousis, et al. · Materials Today Communications · 20
Investigation of the Effectiveness of Silicon Nitride as a Reinforcement Agent for Polyethylene Terephthalate Glycol in Material Extrusion 3D Printing
2024 · Nikolaos Michailidis, Markos Petousis, et al. · Polymers · 19
PDF
Optimizing Carbon Dot—TiO2 Nanohybrids for Enhanced Photocatalytic Hydrogen Evolution
2025 · Pinelopi P. Falara, Nikolaos Chatzikonstantinou, et al. · Materials · 18
Enhanced engineering and biocidal polypropylene filaments enabling melt reduction of AgNO3 through PVP agent: A scalable process for the defense industry with MEX additive manufacturing
2024 · Markos Petousis, Nikolaos Michailidis, et al. · Defence Technology · 17
The impact of the glass microparticles features on the engineering response of isotactic polypropylene in material extrusion 3D printing
2023 · Markos Petousis, Nikolaos Michailidis, et al. · Materials Today Communications · 16
Y 3 Al 5 O 12 –SiO 2 Glasses: Structure and Polyamorphism
2014 · Nektarios K. Nasikas, Andreas Retsinas, et al. · Journal of the American Ceramic Society · 16
Industrially scalable reactive melt mixing of polypropylene/silver nitrate/polyethylene glycol nanocomposite filaments: Antibacterial, thermal, rheological, and engineering response in MEX 3D-printing
2024 · Nectarios Vidakis, Nikolaos Michailidis, et al. · Materials & Design · 15
ASA / spherical Cu nanocomposites in MEX additive manufacturing: a comprehensive interpretation of the engineering and biocidal multi-functionality
2025 · Nectarios Vidakis, Nektarios K. Nasikas, et al. · Results in Engineering · 14
A Comprehensive Optimization Course of Antimony Tin Oxide Nanofiller Loading in Polyamide 12: Printability, Quality Assessment, and Engineering Response in Additive Manufacturing
2024 · Nektarios K. Nasikas, Markos Petousis, et al. · Nanomaterials · 14
Synthesis, Crystal Structure, and Broadband Emission of (CH3)3SSnCl3
2022 · Mohamed M. Elsenety, Andreas Kaltzoglou, et al. · Inorganic Chemistry · 14
Optimization of Roughness, Dimensional Conformity, and Porosity of 3D-Printed ASA with MEX: Impact of Critical Process Control Parameters
2025 · Dimitrios Sagris, Constantine David, et al. · ACS Omega · 13
Works count: 83
Citation count: 1,053
H-index: 17
I10-index: 34
Year
Topic
Type