Get started
Author

Gopinath Muvvala

Observed names: Muvval Gopinath, Muvvala Gopinath
ORCID: 0000-0002-2133-3686
Observed ORCID: 0000-0002-2133-3686
OpenAlex ID: A5001483731
Online monitoring of thermo-cycles and its correlation with microstructure in laser cladding of nickel based super alloy
2016 · Gopinath Muvvala, Debapriya Patra Karmakar, et al. · Optics and Lasers in Engineering · 161
In-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coating
2018 · Gopinath Muvvala, Debapriya Patra Karmakar, et al. · Journal of Alloys and Compounds · 140
Online assessment of TiC decomposition in laser cladding of metal matrix composite coating
2017 · Gopinath Muvvala, Debapriya Patra Karmakar, et al. · Materials & Design · 131
High-temperature abrasive wear characteristics of H13 steel modified by laser remelting and cladded with Stellite 6 and Stellite 6/30% WC
2021 · Debapriya Patra Karmakar, Gopinath Muvvala, et al. · Surface and Coatings Technology · 125
A study on the influence of substrate pre-heating on mitigation of cracks in direct metal laser deposition of NiCrSiBC-60%WC ceramic coating on Inconel 718
2020 · Abhijit Sadhu, Amit Choudhary, et al. · Surface and Coatings Technology · 104
Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium
2020 · Angshuman Chattopadhyay, Gopinath Muvvala, et al. · Optics & Laser Technology · 84
Development of process maps based on molten pool thermal history during laser cladding of Inconel 718/TiC metal matrix composite coatings
2020 · Gopinath Muvvala, Suvradip Mullick, et al. · Surface and Coatings Technology · 69
Monitoring and assessment of tungsten carbide wettability in laser cladded metal matrix composite coating using an IR pyrometer
2017 · Gopinath Muvvala, Debapriya Patra Karmakar, et al. · Journal of Alloys and Compounds · 66
Effect of tempering on laser remelted AISI H13 tool steel
2019 · Debapriya Patra Karmakar, Muvvala Gopinath, et al. · Surface and Coatings Technology · 62
A study on the effect of substrate heating and cooling on bead geometry in wire arc additive manufacturing and its correlation with cooling rate
2020 · Srinath Gudur, Vishwanath Nagallapati, et al. · Materials Today Proceedings · 57
A study on in-situ synthesis of TiCN metal matrix composite coating on Ti–6Al–4V by laser surface alloying process
2019 · Amal M. Nair, Gopinath Muvvala, et al. · Journal of Alloys and Compounds · 57
A study on anisotropy in wire arc additively manufactured Inconel 625 multi-layered wall and its correlation with molten pool thermal history
2022 · Sagar Pawar Dadasaheb, Srinath Ellaswamy Gudur, et al. · Materials Science and Engineering A · 51
Real-time detection of cooling rate using pyrometers in tandem in laser material processing and directed energy deposition
2020 · Amal M. Nair, Gopinath Muvvala, et al. · Materials Letters · 50
Mitigation of cracks in laser welding of titanium and stainless steel by in-situ nickel interlayer deposition
2021 · Angshuman Chattopadhyay, Gopinath Muvvala, et al. · Journal of Materials Processing Technology · 48
Role of molten pool thermo cycle in laser surface alloying of AISI 1020 steel with in-situ synthesized TiN
2019 · Muvvala Gopinath, Pavan Thota, et al. · Surface and Coatings Technology · 46
Effect of scan strategy and heat input on the shear strength of laser cladded Stellite 21 layers on AISI H13 tool steel in as-deposited and heat treated conditions
2020 · Debapriya Patra Karmakar, Gopinath Muvvala, et al. · Surface and Coatings Technology · 44
Effect of cooling rate on residual stress and mechanical properties of laser remelted ceramic coating
2018 · Biswajit Das, Muvvala Gopinath, et al. · Journal of the European Ceramic Society · 38
Analysis of temperature and surface hardening of low carbon thin steel sheets using Yb-fiber laser
2016 · Sagar Sarkar, Muvvala Gopinath, et al. · Surface and Coatings Technology · 36
Investigating the effect of process parameters on weld pool thermal history and mechanical properties of laser welded Inconel 625 and Duplex stainless steel 2205 dissimilar welds
2021 · Gulshad Nawaz Ahmad, Mohammad Shahid Raza, et al. · Optik · 30
A study on developing process-structure–property relationship with molten pool thermal history during laser surface remelting of Inconel 718
2022 · Arkajyoti Jha, Shivam Shukla, et al. · Optics & Laser Technology · 29
Understanding in-process responses in multi-layer friction stir additive manufacturing: Temperature, viscosity, tool torque, and mechanical properties
2024 · Ram Rapaka, Harish Ladi, et al. · Journal of Materials Processing Technology · 28
Laser surface polishing of NiCrSiBC – 60WC ceramic-metal matrix composite deposited by laser directed energy deposition process
2020 · Amit Choudhary, Abhijit Sadhu, et al. · Surface and Coatings Technology · 26
Evaluation of microstructure and thermal history for TiC/Inconel 625 MMC deposition through pre-placed laser cladding method with and without the application of ultrasonic vibration
2023 · Shrey Bhatnagar, Hari Srinivasarao Magham, et al. · CIRP journal of manufacturing science and technology · 23
An investigation on physical phenomena of water-jet assisted underwater wet laser welding technique under continuous and pulsed mode operation
2021 · Parag Malhari Sakate, Suvradip Mullick, et al. · Optik · 21
A lumped parametric analytical model for predicting molten pool temperature and clad geometry in pre-placed powder laser cladding
2021 · Shrey Bhatnagar, Suvradip Mullick, et al. · Optik · 19
Works count: 68
Citation count: 1,744
H-index: 23
I10-index: 33
Year
Topic
Type