Get started
Author

Thanongsak Thepsonthi

Observed names: T. Thepsonthi, Thepsonthi, Thanongsak
Institution: Burapha University
ORCID: 0000-0002-7573-1276
Observed ORCID: 0000-0002-7573-1276
OpenAlex ID: A5002385973
3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: Experimental validations on chip flow and tool wear
2015 · Thanongsak Thepsonthi, Tuğrul Özel · Journal of Materials Processing Technology · 219
Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear
2012 · Thanongsak Thepsonthi, Tuğrul Özel · Journal of Materials Processing Technology · 186
Multi-objective process optimization for micro-end milling of Ti-6Al-4V titanium alloy
2012 · Thanongsak Thepsonthi, Tuğrul Özel · The International Journal of Advanced Manufacturing Technology · 173
Experiments and finite element simulations on micro-milling of Ti–6Al–4V alloy with uncoated and cBN coated micro-tools
2011 · T. Özel, T. Thepsonthi, et al. · CIRP Annals · 151
Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills
2008 · T. Thepsonthi, M. Hamdi, et al. · International Journal of Machine Tools and Manufacture · 112
An integrated toolpath and process parameter optimization for high-performance micro-milling process of Ti–6Al–4V titanium alloy
2014 · Thanongsak Thepsonthi, Tuğrul Özel · The International Journal of Advanced Manufacturing Technology · 54
Micro milling of titanium alloy Ti-6Al-4V: 3-D finite element modeling for prediction of chip flow and burr formation
2017 · Tuğrul Özel, Alaa Olleak, et al. · Production Engineering · 49
Effect of process parameters in nanosecond pulsed laser micromachining of PMMA-based microchannels at near-infrared and ultraviolet wavelengths
2012 · Daniel Teixidor, Francisco Orozco, et al. · The International Journal of Advanced Manufacturing Technology · 49
Swarm Intelligent Selection and Optimization of Machining System Parameters for Microchannel Fabrication in Medical Devices
2011 · Elisa Vázquez, Joaquim Ciurana, et al. · Materials and Manufacturing Processes · 49
Nanosecond pulsed laser micromachining of PMMA-based microfluidic channels
2012 · Daniel Teixidor, Thanongsak Thepsonthi, et al. · Journal of Manufacturing Processes · 44
Simulation of serrated chip formation in micro-milling of titanium alloy Ti-6Al-4V using 2D elasto-viscoplastic finite element modeling
2016 · Thanongsak Thepsonthi, Tuğrul Özel · Production Engineering · 26
Micromilling high aspect ratio features using tungsten carbide tools
2014 · Iñigo Llanos, Amaia Agirre, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 26
Modeling and optimization of micro-end milling process for micro-manufacturing
2014 · Thepsonthi, Thanongsak · 12
Development of an Add-On Device Using 3D Printing for the Enhancement of Drug Administration Efficiency of Dry Powder Inhalers (Accuhaler)
2022 · Kittipat Suwanpitak, Lee-Yong Lim, et al. · Pharmaceutics · 10
PDF
Mechanical Micro‐Machining
2011 · Tuğrul Özel, Thanongsak Thepsonthi · Wiley eBooks · 6
Nanosecond Pulsed Laser Processing of Ion Implanted Single Crystal Silicon Carbide Thin Layers
2014 · Tuğrul Özel, Thanongsak Thepsonthi, et al. · Physics Procedia · 3
Tailoring the Morphological and Transport Properties of PES–Activated Carbon Composites Through PEG Molecular Weight Modulation
2026 · Jason Nathanael Thionardo, Muhammad Mirza Rahardianto, et al. · Journal of Composites Science · 1
Finite element modeling and simulation of micro-milling
2012 · Thanongsak Thepsonthi, Tuğrul Özel · 1
Tuning the Permeability–Selectivity Trade-Off in Activated Carbon/PES Mixed Matrix Membranes via Compaction and Vapor-Induced Phase Separation
2026 · Asseghaf Bintang Ramadhani, Jason Nathanael Thionardo, et al. · Membranes
PDF
Valorization of Thermoplastic Polyurethane and Styrofoam Waste for Development of Improved Sustainable Blend Membranes
2026 · Tutik Sriani, Tatiya Wannomai, et al. · Sustainable Chemistry
PDF
Machining Applications
2016 · Tuğrul Özel, Elisabetta Ceretti, et al. · Wiley eBooks
Statistically based process optimization for improved surface quality in micro-end milling of Ti-6Al- 4V titanium alloy
2011 · Thanongsak Thepsonthi, Tuğrul Özel
Works count: 22
Citation count: 1,171
H-index: 12
I10-index: 14
Year
Topic
Type