Get started
Author

Zygmunt Szulc

Structural properties of Ti/Al clads manufactured by explosive welding and annealing
2015 · D.M. Fronczek, J. Wojewoda-Budka, et al. · Materials & Design · 203
Microstructure and kinetics of intermetallic phase growth of three-layered A1050/AZ31/A1050 clads prepared by explosive welding combined with subsequent annealing
2017 · D.M. Fronczek, R. Chulist, et al. · Materials & Design · 85
Interfacial reactions and microstructure related properties of explosively welded tantalum and steel sheets with copper interlayer
2021 · H. Paul, R. Chulist, et al. · Materials & Design · 63
Growth kinetics of TiAl 3 phase in annealed Al/Ti/Al explosively welded clads
2017 · D.M. Fronczek, R. Chulist, et al. · Materials Letters · 53
Microstructure Changes and Phase Growth Occurring at the Interface of the Al/Ti Explosively Welded and Annealed Joints
2016 · D. M. Fronczek, R. Chulist, et al. · Journal of Materials Engineering and Performance · 49
PDF
Texture transformations near the bonding zones of the three-layer Al/Ti/Al explosively welded clads
2017 · R. Chulist, D.M. Fronczek, et al. · Materials Characterization · 42
Progress in the characterization of explosively joined Ti/Ni bimetals
2014 · Krzysztof Topolski, Piotr Wieciński, et al. · Materials & Design (1980-2015) · 41
Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads
2017 · Dagmara Malgorzata Fronczek, Robert Chulist, et al. · Metallurgical and Materials Transactions A · 32
PDF
Microstructure and Properties of the Ti6Al4V/Inconel 625 Bimetal Obtained by Explosive Joining
2016 · Krzysztof Topolski, Zygmunt Szulc, et al. · Journal of Materials Engineering and Performance · 27
PDF
Microstructure and corrosion resistance of Ni-Ti-Al multi-layer laminates manufactured by explosive welding with subsequent rolling
2023 · Marta Lipińska, Ewa Ura-Bińczyk, et al. · Journal of Manufacturing Processes · 26
Residual stresses distribution, correlated with bending tests, within explosively welded Ti gr. 2/A1050 bimetals
2018 · D.M. Fronczek, K. Saksl, et al. · Materials Characterization · 21
Residual Stresses in Explosively Welded Plates Made of Titanium Grade 12 and Steel with Interlayer
2018 · A. Karolczuk, H. Paul, et al. · Journal of Materials Engineering and Performance · 17
PDF
Microstructure of the interface zone after explosive welding and further annealing of A1050/Ni201 clads using various joining conditions
2020 · Izabella Kwiecien, Piotr Bobrowski, et al. · Journal of Materials Science · 16
PDF
The Interface Zone of Explosively Welded Titanium/Steel after Short-Term Heat Treatment
2021 · Marcin Szmul, Katarzyna Stan-Glowinska, et al. · Metallurgical and Materials Transactions A · 13
PDF
Microstructural and Chemical Composition Changes in the Bonding Zone of Explosively Welded Sheets
2019 · H. Paul, M.M. Miszczyk, et al. · Archives of Metallurgy and Materials · 13
PDF
Interface Characterization of Ni/Al Bimetallic Explosively Welded Plate Manufactured with Application of Exceptionally High Detonation Speed
2020 · I. Kwiecien, P. Bobrowski, et al. · Journal of Materials Engineering and Performance · 10
PDF
On the Disintegration of A1050/Ni201 Explosively Welded Clads Induced by Long-Term Annealing
2021 · Izabella Kwiecien, Anna Wierzbicka-Miernik, et al. · Materials · 9
PDF
Properties of sandwich metals joined by explosive cladding method
2010 · L. Čížek, D. Ostroushko, et al. · Archives of Materials Science and Engineering · 9
The intermetallics growth at the interface of explosively welded A1050/Ti gr. 2/A1050 clads in relation to the explosive material
2018 · Dagmara M. Fronczek, Anna Wierzbicka-Miernik, et al. · Archives of Civil and Mechanical Engineering · 8
Mechanism and growth kinetics of Al3Ti phase in fifteen-layered Ti Gr.1/A1050 clads produced with the explosive welding technique
2024 · Marta Janusz-Skuza, Agnieszka Bigos, et al. · Archives of Civil and Mechanical Engineering · 6
Interface Zone Microstructure of the Explosively Cladded Copper on Steel
2022 · Marta Janusz-Skuza, Agnieszka Bigos, et al. · Journal of Materials Engineering and Performance · 5
Variety of Aluminum/Steel Interface Microstructures Formed in Explosively Welded Clads Followed by the Weld’s Thermal Expansion Response
2022 · Monika Bugajska, Lukasz Maj, et al. · Journal of Materials Engineering and Performance · 5
Local structure of explosively welded titanium–stainless steel bimetal
2015 · Karel Saksl, Dmytro Ostroushko, et al. · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · 5
How to suppress the Kirkendall porosity within the Ti/Ni explosive welds?
2024 · Joanna Wojewoda-Budka, Izabella Kwiecien, et al. · Archives of Civil and Mechanical Engineering · 4
PDF
Analiza zmian w warstwie połączenia płyt Al-Cu spajanych wybuchowo
2010 · H. Paul, M. Miszczyk, et al. · Inżynieria Materiałowa · 4
Works count: 40
Citation count: 775
H-index: 13
I10-index: 16
Year
Topic
Type