Author

Ali Dadashi

Observed names: A. Dadashi, Dadashi, Ali

Institution: Semnan University

Observed institution: Semnan University

ORCID: 0000-0002-2398-7456

Observed ORCID: 0000-0002-2398-7456

OpenAlex ID: A5003433782

High-cycle bending fatigue properties of additive-manufactured ABS and PLA polymers fabricated by fused deposition modeling 3D-printing

2021 · M. Azadi, A. Dadashi, et al. · Forces in Mechanics · 164

Investigating the roles of fiber, resin, and stacking sequence on the low-velocity impact response of novel hybrid thermoplastic composites

2020 · M.E. Kazemi, L. Shanmugam, et al. · Composites Part B Engineering · 114

Topology optimization of additive-manufactured metamaterial structures: A review focused on multi-material types

2022 · Sattar Mohammadi Esfarjani, Ali Dadashi, et al. · Forces in Mechanics · 79

Machine learning for fatigue lifetime predictions in 3D-printed polylactic acid biomaterials based on interpretable extreme gradient boosting model

2024 · Hamid Nasiri, Ali Dadashi, et al. · Materials Today Communications · 37

Optimization of 3D printing parameters in polylactic acid bio-metamaterial under cyclic bending loading considering fracture features

2024 · Ali Dadashi, Mohammad Azadi · Heliyon · 33

Experimental bending fatigue data of additive-manufactured PLA biomaterial fabricated by different 3D printing parameters

2022 · Ali Dadashi, Mohammad Azadi · Progress in Additive Manufacturing · 29

Experimental fatigue dataset for additive-manufactured 3D-printed Polylactic acid biomaterials under fully-reversed rotating-bending bending loadings

2022 · Mohammad Azadi, Ali Dadashi · Data in Brief · 20

Multi-objective numerical optimization of 3D-printed polylactic acid bio-metamaterial based on topology, filling pattern, and infill density via fatigue lifetime and mass

2023 · Ali Dadashi, Mohammad Azadi · PLoS ONE · 11

Fatigue behavior and failure mechanism of 3D-printed continuous glass fiber-reinforced PLA composites under rotating bending fatigue

2025 · Mehrnoosh Javadian, Ali Dadashi, et al. · Composites Part C Open Access · 10

Plain and fretting fatigue characteristics of 16MnCr5 steel under cyclic bending loading with the application of engine piston pin

2024 · Mobin Dizisaz, Mohammad Sadegh Aghareb Parast, et al. · Materials Chemistry and Physics · 10

Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy: Effect of nano-clay addition and heat-treatment

2021 · Mohammad Azadi, Adel Basiri, et al. · Frattura ed Integrità Strutturale · 8

Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

2022 · Hamed Bahmanabadi, Mohammad Azadi, et al. · Frattura ed Integrità Strutturale · 5

Investigating the delamination frequency in 3D-printed PLA-TPU bi-material composite structures under cyclic bending fatigue testing

2024 · Ali Dadashi, Abbasali Bagheri, et al. · Smart materials & methods. · 4

Evaluation of high-cycle bending fatigue properties and fracture behaviors in AM60 magnesium alloy joints by friction welding

2025 · Ali Dadashi, Amin Asghaie, et al. · Forces in Mechanics · 3

Surface Roughness Evaluation of Fused Deposition ModelingAdditive-Manufactured Polylactic Acid Components Affected by 3D-Printing Parameters and Vapor Post Processing Treatments

2024 · Mohammad Azadi, Maryam Chiyani, et al. · CRC Press eBooks

Works count: 17

Citation count: 527

H-index: 10

I10-index: 10