Get started
Author

Gow Yi Tzou

Observed names: G Y Tzou, G-Y Tzou, G. -Y. Tzou, G. Y. Tzou, G.- Y. Tzou, G.-Y. Tzou, G.Y Tzou, G.Y. Tzou, Gow - Yi Tzou, Gow-Yi Tzou
Observed institutions: Russian Academy of Sciences, National Sun Yat-sen University, Minghsin University of Science and Technology, Fortune Institute of Technology, University of Wollongong, Kao Yuan University, Chung Chou University of Science and Technology, Institute for Problems in Mechanics
ORCID: 0000-0003-2986-8906
Observed ORCID: 0000-0003-2986-8906
OpenAlex ID: A5003723912
Analytical and experimental study on asymmetrical sheet rolling
1997 · Yeong-Maw Hwang, Gow-Yi Tzou · International Journal of Mechanical Sciences · 102
Analysis of asymmetrical cold and hot bond rolling of unbounded clad sheet under constant shear friction
2006 · S.C. Pan, M.N. Huang, et al. · Journal of Materials Processing Technology · 66
Analytical modified model of the cold bond rolling of unbounded double-layers sheet considering hybrid friction
2003 · Gow-Yi Tzou, Ming-Nan Huang · Journal of Materials Processing Technology · 44
An analytical approach to asymmetrical cold- and hot-rolling of clad sheet using the slab method
1996 · Yeong-Maw Hwang, Gow-Yi Tzou · Journal of Materials Processing Technology · 44
Relationship between frictional coefficient and frictional factor in asymmetrical sheet rolling
1999 · Gow-Yi Tzou · Journal of Materials Processing Technology · 41
An analytical approach to asymmetrical cold strip rolling using the slab method
1993 · Y.- M. Hwang, G.- Y. Tzou · Journal of Materials Engineering and Performance · 35
Analytical approach to the cold-and-hot bond rolling of sandwich sheet with outer hard and inner soft layers
2002 · G.Y. Tzou, A.K. Tieu, et al. · Journal of Materials Processing Technology · 33
An analytical approach to asymmetrical hot-sheet rolling considering the effects of the shear stress and internal moment at the roll gap
1995 · Yeong-Maw Hwang, Gow-Yi Tzou · Journal of Materials Processing Technology · 30
Study on minimum thickness for asymmetrical hot-and-cold PV rolling of sheet considering constant shear friction
2001 · Gow-Yi Tzou, Ming-Nan Huang · Journal of Materials Processing Technology · 26
Two analytical models of double-layer clad sheet compression forming based on the upper bound and the slab methods
2003 · Hung-Hsiou Hsu, Gow-Yi Tzou · Journal of Materials Processing Technology · 20
Study on compression forming of a rotating disk considering hybrid friction
2002 · M.N Huang, G.Y Tzou · Journal of Materials Processing Technology · 19
Investigation on comparisons between two analytical models of sandwich sheet rolling bonded before rolling
2003 · M.N Huang, G.Y Tzou, et al. · Journal of Materials Processing Technology · 18
Theoretical study on the cold sandwich sheet rolling considering Coulomb friction
2001 · G.Y Tzou · Journal of Materials Processing Technology · 18
Analysis of asymmetrical hot strip rolling by the slab method
1995 · Y. M. Hwang, G. Y. Tzou · Journal of Materials Engineering and Performance · 18
Investigation of a slab method analysis and FEM simulation on rotating compression forming of ring
2006 · Gow-Yi Tzou, Hung-Hsiou Hsu, et al. · Journal of Materials Processing Technology · 16
Study on the twist compression forming of cylinder based on the upper bound and slab methods
2006 · Ching-Jyi Chen, Gow-Yi Tzou, et al. · Journal of Materials Processing Technology · 16
Study on the minimum thickness for the asymmetrical PV cold rolling of sheet
2000 · Gow-Yi Tzou, Ming-Nan Huang · Journal of Materials Processing Technology · 16
FEM Analysis and Experiment Validation on Multi-Pass Forging of Torx Round Flange Bolt
2020 · Shih-Hsien Lin, Dyi-Cheng Chen, et al. · International Journal of Automotive Technology · 15
A study of PSW rolling process using stream functions
1998 · Yeong-Maw Hwang, Hung-Hsiou Hsu, et al. · Journal of Materials Processing Technology · 14
A new upper bound solution for a hollow cylinder subjected to compression and twist
2004 · S Alexandrov, G-Y Tzou, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 13
Processing animation simulation and FEM analysis of multi-stage cold forging of stainless automotive battery fastener
2013 · Sun Mingchao, Gow Yi Tzou, et al. · 12
Study on Asymmetrical Sheet Rolling by the Finite Element Method
1999 · Yeong-Maw Hwang, Dyi-Cheng Chen, et al. · Journal of Mechanics · 12
PDF
Vision system based on deep learning for product inspection in casting manufacturing: pump impeller images
2021 · S Taweelerd, C C Chang, et al. · Journal of Physics Conference Series · 11
PDF
Defect Improvement of Extrusion Dies Using Combination of Fem Stress Analysis With the Taguchi Method
2015 · Kao-Hua Chang, Ching-Wei Shih, et al. · Transactions of the Canadian Society for Mechanical Engineering · 9
Effect of plastic anisotropy on the limit load of highly undermatched welded specimens in bending
2007 · Sergei Alexandrov, Gow-Yi Tzou, et al. · Engineering Fracture Mechanics · 9
Works count: 108
Citation count: 785
H-index: 16
I10-index: 23
Year
Topic
Type