Get started
Author

Balla Srinivasa Prasad

Observed names: B. Srinivasa Prasad, B.S. Prasad, Ball Srinivasa Prasad, Balla S Prasad, Balla, Srinivasa Prasad, Dr. Balla Srinivasa Prasad
Institution: GITAM University
Observed institution: GITAM University
ORCID: 0000-0002-4911-2439
Observed ORCID: 0000-0002-4911-2439
OpenAlex ID: A5005249886
Correlation between vibration amplitude and tool wear in turning: Numerical and experimental analysis
2016 · Balla Srinivasa Prasad, M. Prakash Babu · Engineering Science and Technology an International Journal · 109
PDF
Effect of Tool Rotational Speed on Mechanical Properties Of Aluminium Alloy 5083 Weldments in Friction Stir Welding
2018 · K. Aruna Prabha, Prasad Kumar Putha, et al. · Materials Today Proceedings · 61
Condition monitoring of turning process using infrared thermography technique – An experimental approach
2017 · Balla Srinivasa Prasad, K. Aruna Prabha, et al. · Infrared Physics & Technology · 57
Development of a system for monitoring tool condition using acousto-optic emission signal in face turning—an experimental approach
2010 · Balla Srinivasa Prasad, M. M. M. Sarcar, et al. · The International Journal of Advanced Manufacturing Technology · 55
Effect of white layer on the damping capacity of metal matrix composites
2013 · D. Siva Prasad, Ch. Shoba, et al. · Materials Science and Engineering A · 25
Condition Monitoring of CNC Machining Using Adaptive Control
2013 · B. Srinivasa Prasad, D. Siva Prasad, et al. · Machine Intelligence Research · 24
Surface textural analysis using acousto optic emission- and vision-based 3D surface topography—a base for online tool condition monitoring in face turning
2011 · Balla Srinivasa Prasad, M. M. M. Sarcar, et al. · The International Journal of Advanced Manufacturing Technology · 18
Evaluation of correlation between vibration signal features and three-dimensional finite element simulations to predict cutting tool wear in turning operation
2014 · Balla Srinivasa Prasad, M Prakash Babu, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 17
A detailed study on optimizing DMLS process parameters to enhance AlSi10Mg metal component properties
2024 · Pragnya Kunisetti, Balla Srinivasa Prasad · Journal of Engineering and Applied Science · 15
PDF
Online modeling and monitoring of power consumption, aerosol emissions, and surface roughness in wire cut electric discharge machining of Ti-6Al-4 V
2022 · Kaki Venkata Rao, Yekula Prasanna Kumar, et al. · The International Journal of Advanced Manufacturing Technology · 15
A review on multi sensor data fusion technique in CNC machining of tailor-made nanocomposites
2020 · K. V. V. N. R. Chandra Mouli, Balla Srinivasa Prasad, et al. · SN Applied Sciences · 14
Machining of Steam Turbine Blade on 5-Axis CNC Machine
2019 · K. Aruna Prabha, Balla Srinivasa Prasad · Materials Today Proceedings · 13
Analysis of vibration signals to quantify displacement amplitude in the monitoring of vibration-assisted turning
2017 · Balla Srinivasa Prasad, Javvadi Umamaheswara Rao, et al. · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · 12
Real-time tool condition monitoring of face milling using acousto-optic emission â an experimental approach
2011 · B. Srinivasa Prasad, M.M.M. Sarcar, et al. · International Journal of Computer Applications in Technology · 12
Experimental investigation to predict the condition of cutting tool by surface texture analysis of images of machined surfaces based on amplitude parameters
2008 · B.S. Prasad, M.M.M. Sarcar · International Journal of Machining and Machinability of Materials · 10
Experimental investigation to optimize tool performance in high-speed drilling: a comparative study
2019 · Balla Srinivasa Prasad, D. S. Sai Ravi Kiran · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 9
Comparative Study of Wear Patterns of both Coated and Uncoated Tool Inserts in High Speed Turning of EN36 Steel
2018 · K. Aruna Prabha, Balla Srinivasa Prasad, et al. · Materials Today Proceedings · 8
Effect of temperature on surface roughness in friction stir drilling of AL-6061 with varied drill tools
2022 · N. Srilatha, Balla Srinivasa Prasad, et al. · Materials Today Proceedings · 7
A novel method of friction drilling technique review
2019 · N. Srilatha, B. Srinivasa Prasad · AIP conference proceedings · 7
Surface morphology and microstructural analysis of al 8081-mg/zr/tio 2 nano metal matrix composite – A base for performance evaluation of polycrystalline diamond and poly cubic boron nitride tools
2021 · Balla S Prasad, Chandra M KarakaVVNR, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 6
Analysis of vibration assisted dry end milling using 3D FE simulation – An investigational approach
2021 · L. Vamsi Krishna Reddy, Balla Srinivasa Prasad, et al. · Materials Today Proceedings · 6
An effective approach to synthesize carbon nanotube-reinforced Al matrix composite precursor
2017 · Sandeep Alanka, Chanamala Ratnam, et al. · Science and Engineering of Composite Materials · 5
PDF
Evaluation of tool performance and wear through vibration signature analysis in drilling of IS3048 steel
2021 · Annavarapu Venkata Sridhar, Balla Srinivasa Prasad, et al. · Journal of Engineering and Applied Science · 4
PDF
Characterization of mechanical properties in tailored made Al (8081)-Zr/Mg/Tio2 nano metal matrix composites
2021 · Karaka V.V.N.R. Chandra Mouli, Balla Srinivasa Prasad · Materials Today Proceedings · 4
Additive manufacturing of a human mandible and Finite element analysis of dental implant for prosthodontic applications
2021 · Regalla Rakesh Reddy, Kode Jaya Prakash, et al. · Materials Today Proceedings · 4
Works count: 51
Citation count: 543
H-index: 12
I10-index: 15
Year
Topic
Type