Author

A.K. Tingaev

Observed names: A K Tin'Gaev, A K Tin'gaev, A K Tingaev, A. K. Tin'gaev, A. K. Tingaev, Aleksander Tingaev, Aleksandr Tingaev, Tingaev, Aleksandr, А. К. Тиньгаев, Аleksandr Tingaev, Александр Кириллович Тиньгаев, Тиньгаев Александр Кириллович

Institution: South Ural State University

Observed institution: South Ural State University

ORCID: 0000-0001-7838-492X

Observed ORCID: 0000-0001-7838-492X

OpenAlex ID: A5005589392

An overview of microstructure, mechanical properties and processing of high entropy alloys and its future perspectives in aeroengine applications

2023 · Tushar Sonar, Mikhail Ivanov, et al. · Materials Science for Energy Technologies · 72

A critical review on solid-state welding of high entropy alloys– processing, microstructural characteristics and mechanical properties of joints

2023 · Tushar Sonar, Mikhail Ivanov, et al. · Defence Technology · 48

A comprehensive review on fusion welding of high entropy alloys – Processing, microstructural evolution and mechanical properties of joints

2023 · Tushar Sonar, Mikhail Ivanov, et al. · International Journal of Lightweight Materials and Manufacture · 45

Study of the Effect of Thermal Cutting on the Microstructure and Chemical Composition of the Edges of Workpieces Made of Steel Brands S345, S390

2016 · A.K. Tingaev, R.G. Gubaydulin, et al. · Procedia Engineering · 13

PDF

Unveiling the Influence of A-TIG Welding with AlCoFeCrNi2.1 EHEA Intermediate Layer on PWHT Performance of 9Cr-1Mo-V/304L Steel Dissimilar Joints for Next-Generation Power Plants

2025 · Tushar Sonar, Mikhail Ivanov, et al. · Metallurgical and Materials Transactions A · 12

Experimental and numerical investigation on cold cracking susceptibility of naval grade high strength steel welds for lightweight shipbuilding structures

2024 · Mikhail Ivanov, Аlexander Cherniavsky, et al. · International Journal of Lightweight Materials and Manufacture · 10

Causes of Failure of High-Tensile Stud Bolts Used for Joining Metal Parts of Tower Crane

2017 · A K Tingaev, R G Gubaydulin, et al. · IOP Conference Series Materials Science and Engineering · 5

PDF

Effect of welding current modes and post weld heat treatment on microstructure, tensile properties and fracture behavior of gas tungsten arc welded AlCoCrFeNi2.1 EHEA sheets for advanced gas turbine applications

2026 · Tushar Sonar, Mikhail Ivanov, et al. · Defence Technology · 4

Analysis of cold cracking resistance when welding high-strength cold-resistant steel

2024 · O. A. Kupriyanova, A. K. Tingaev, et al. · Chernye Metally · 1

Flange connections with high-strength bolts with technological heredity of bolts

2020 · Vatin, Nikolai, Gubaydulin, Rafkat Galimovich, et al. · DOAJ (DOAJ: Directory of Open Access Journals) · 1

Evaluation of Influence of Thermal Methods of Metal Separation Cutting on Welding Quality

2017 · A.K. Tingaev, M.A. Ivanov, et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 1

Improvement of standard requirements on the quality of welded joints in steel structures. Part 2

2001 · A K Tin'gaev, R G Gubaidulin, et al. · Welding International · 1

Improving standard requirements for the quality of welded joints in steel structures ‐ part 3

2001 · A K Tin'gaev, R G Gubaidulin, et al. · Welding International · 1

Classification of welded joints in engineering structures on the basis of responsibility categories

1999 · A K Tin'Gaev · Welding International · 1

A brief review of high entropy alloys and its future perspectives in aerospace applications

2024 · T. M. Sonar, M. A. Ivanov, et al. · Ferrous Metallurgy Bulletin of Scientific Technical and Economic Information

Influence on factors of cold crack formation factors of a steel 10G2FBYu welded joint by regulating linear energy

2019 · A.G. Alrukhaymi, M.A. Ivanov, et al. · Welding International

Kinetics of Residual Stresses in a Welded Frameless Tubular Node

2019 · A.K. Tingaev · Materials science forum

Building low-cycle fatigue curve to assess remaining lifetime of steel-teeming ladle turret

2018 · R G Gubaidulin, A K Tingaev · IOP Conference Series Materials Science and Engineering

PDF

Study of the Reasons of Emergency Shutdown of Multiple Hearth Furnace for Production of the Magnesia Binding Material

2016 · R.G. Gubaidulin, A.K. Tingaev · Procedia Engineering

PDF

Исследование влияния количества ремонтов сварного соединения на его механические свойства

2014 · Александр Кириллович Тиньгаев, Евгений Игоревич Елсуков · Вестник Южно-Уральского государственного университета. Серия: Металлургия

Исследование напряженного состояния сварных соединений бесфасоночных трубчатых узлов

2012 · R G Gubaidulin, А. К. Тиньгаев, et al. · Электронный архив ЮУрГУ (South Ural State University)

Вероятностно-статистическая модель бездефектности сварного соединения

2012 · А. К. Тиньгаев, R G Gubaidulin, et al. · Электронный архив ЮУрГУ (South Ural State University)

PDF

Исследование причин неработоспособного состояния металлоконструкций покрытия физкультурно-спортивного комплекса

2012 · R G Gubaidulin, А. К. Тиньгаев · Bulletin of South Ural State University series Construction Engineering and Architecture

PDF

Определениеостаточного ресурсаопорного блока морской стационарной платформы

2012 · Губайдулин Рафкат Галимович, Тиньгаев Александр Кириллович, et al. · Академический вестник УралНИИпроект РААСН

Оценка несущей способности узловусиления конструкций покрытия ФСК

Works count: 26

Citation count: 215

H-index: 6

I10-index: 6