Get started
Author

Yahya Kemal Tür

Observed names: Tür, Yahya Kemal, Y K TÜR, Y. K. Tur, Y. K. Tür, Y.K. Tur, Yahya K. Tur, Yahya K. Tür, Yahya Kemal Tur, Yahya TÜR, Yahya Tür
ORCID: 0000-0002-9521-8875
Observed ORCID: 0000-0002-9521-8875
OpenAlex ID: A5006032454
High‐Frequency Fatigue Behavior of Woven‐Fiber‐Fabric‐Reinforced Polymer‐Derived Ceramic‐Matrix Composites
1998 · Nikhilesh Chawla, Yahya K. Tur, et al. · Journal of the American Ceramic Society · 69
Evaluation of mechanical properties of Al2O3–Cr2O3 ceramic system prepared in different Cr2O3 ratios for ceramic armour components
2019 · Betül Kafkaslıoğlu Yıldız, Hüseyin Yılmaz, et al. · Ceramics International · 43
Periodic tensile overloads in 2024-T3 Al-alloy
1996 · Yahya K. Tür, Öktem Vardar · Engineering Fracture Mechanics · 33
Cold sintering-assisted densification of GDC electrolytes for SOFC applications
2022 · Murat Murutoglu, Tugce Ucun, et al. · International Journal of Hydrogen Energy · 31
Mechanical behaviour of a low-clay translucent whiteware
2004 · C.B. Ustundag, Y.K. Tur, et al. · Journal of the European Ceramic Society · 29
PDF
Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometries
2023 · Betül Kafkaslıoğlu Yıldız, Ali Suat Yıldız, et al. · Ceramics International · 28
Processing and mechanical properties of textured mullite/zirconia composites
2006 · Cem Öztürk, Yahya Kemal Tür · Journal of the European Ceramic Society · 27
Effect of ZrO2 content on the microstructure and flexural strength of Al2O3–ZrO2 composites with the stored failure energy-fragmentation relations
2021 · Betül Kafkaslıoğlu Yıldız, Yahya Kemal Tür · Ceramics International · 26
Pressureless sintering of Al 2 O 3 /Ni nanocomposites produced by heterogeneous precipitation method with varying nickel contents
2016 · Betül Kafkaslıoğlu, Yahya Kemal Tür · International Journal of Refractory Metals and Hard Materials · 22
An investigation of equibiaxial flexural strength and hardness properties of Al2O3–Ni nanocomposites based microstructures with ZrO2 and Cr2O3 additives
2019 · Betül Kafkaslıoğlu Yıldız, Yahya Kemal Tür · Materials Science and Engineering A · 17
The effect of 3mol% Y2O3 stabilized ZrO2 produced by a steric entrapment method on the mechanical and sintering properties of Cr3C2 based cermets
2012 · Ali Özer, Waltraud M. Kriven, et al. · Materials Science and Engineering A · 13
Cold Sintering of Anode-Supported 8YSZ/NiO-8YSZ Bilayers for Solid Oxide Fuel Cells
2021 · Tugce Ucun, Murat Murutoglu, et al. · ACS Applied Energy Materials · 12
Templated grain growth of textured mullite/zirconia composites
2004 · Cihangir Duran, Yahya Kemal Tür · Materials Letters · 12
Sintering behaviour and mechanical properties of Cr3C2–NiCr cermets
2013 · A ÖZER, Y K TÜR · Bulletin of Materials Science · 10
Functionally graded Al 2 O 3 ‐based ceramic systems by gel casting method
2024 · Gülsüm Topateş, Erdem Akça, et al. · International Journal of Applied Ceramic Technology · 9
PDF
Influence of nickel addition on the microstructure and mechanical properties of Al2O3-5vol%ZrO2 ceramic composites prepared via precipitation method
2019 · Betül Kafkaslıoğlu Yıldız, Hüseyin Yılmaz, et al. · International Journal of Minerals Metallurgy and Materials · 9
Effect of cold sintering on the sintering shrinkage matching of NiO-GDC anode with GDC electrolytes in making anode-supported solid oxide fuel cells
2024 · Tugce Ucun, Murat Murutoglu, et al. · Solid State Ionics · 7
Phase formation and texture development in mullite/zirconia composites fabricated by templated grain growth
2006 · C. Duran, Y. K. Tür · Journal of Materials Science · 7
Mechanical Property Characterization of Na1/2Bi1/2TiO3-BaTiO3 Ceramics
2014 · C. Efe, H. Yilmaz, et al. · International Journal of Chemical Engineering and Applications · 5
PDF
Processing and mechanical characterization of Al2O3/Ni and Al2O3/C0 composites by pressureless sintering of nanocomposite powders
2018 · Yildiz Kafkaslioğlu, Hüseyin Yilmaz, et al. · Processing and Application of Ceramics · 4
PDF
Mechanical and electromechanical properties of piezoelectric ceramic fibers drawn by the alginate gelation method
2019 · Ebru Mensur‐Alkoy, Mustafa Yunus Kaya, et al. · International Journal of Applied Ceramic Technology · 3
Assessing the Fracture Toughness of Al2O3-Sm2O3 Ceramics for Different Sm2O3 Contents Using a Reliable Toughness Measurement Method: Single-Edge Precracked Beam
2024 · Betül Kafkaslıoğlu Yıldız, Seda Taşdemir, et al. · Journal of Materials Engineering and Performance · 2
Exploring Microstructure and Bending Strength of Al2O3 Ceramics Doped with Sm2O3 Rare-Earth Oxide: Impact of Volume Ratios and Sintering Temperatures
2023 · Seda TAŞDEMİR, Betül KAFKASLIOĞLU YILDIZ, et al. · Karadeniz Fen Bilimleri Dergisi · 2
PDF
Effect of Mullite Grains Orientation on Toughness of Mullite/Zirconia Composites
2010 · Y. K. Tür, A. E. Sünbül, et al. · Ceramic transactions /Ceramic transactions · 2
An Experimental Study on the Effects of SiC on the Sintering and Mechanical Properties of Cr 3 C 2‐ NiCR Cermets
2011 · Ali Ozer, Waltraud M. Kriven, et al. · Ceramic engineering and science proceedings · 1
Works count: 33
Citation count: 423
H-index: 12
I10-index: 14
Year
Topic
Type