Author

Nicholas J. Durisek

Observed name: N. J. Durisek

Observed institution: The Ohio State University

OpenAlex ID: A5006308440

The Design of a Vehicle Inertia Measurement Facility

1995 · Gary J. Heydinger, Nicholas J. Durisek, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 51

Developments in Vehicle Center of Gravity and Inertial Parameter Estimation and Measurement

1995 · Ronald A. Bixel, Gary J. Heydinger, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 29

Effects of Loading on Vehicle Handling

1998 · Gary J. Heydinger, Ronald A. Bixel, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 21

Vehicle Characterization Through Pole Impact Testing, Part I: Vehicle Response in Terms of Acceleration Pulses

2004 · Nicholas J. Durisek, C. Brian Tanner, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 16

Pole Impact Speeds Derived from Bilinear Estimations of Maximum Crush for Body-On-Frame Constructed Vehicles

2004 · H. Fred Chen, C. Brian Tanner, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 13

An Analysis of Yaw Inducing Drag Forces Imparted During Tire Tread Belt Detachments

2007 · Donald F. Tandy, Kenneth T. Tandy, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 11

Vehicle Characterization Through Pole Impact Testing, Part II: Analysis of Center and Offset Center Impacts

2005 · Nicholas J. Durisek, Kenneth T. Tandy, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 11

Automotive Restraint Loading Evidence for Moderate Speed Impacts and a Variety of Restraint Conditions

2006 · C. Brian Tanner, Nicholas J. Durisek, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 10

An overview of a vehicle inertia measurement facility

1994 · G J Heydinger, David A. Coovert, et al. · 10

Land Vehicle Roll/Yaw Product of Inertia Measurement

1997 · N. J. Durisek, G. J. Heydinger, et al. · Journal of Dynamic Systems Measurement and Control · 9

Vehicle Response Comparison to Tire Tread Separations Induced by Circumferentially Cut and Distressed Tires

2007 · Donald F. Tandy, Kevan J. Granat, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 8

Delta-V, Barrier Equivalent Velocity and Acceleration Pulse of a Vehicle During an Impact

2005 · Philip H. Cheng, C. Brian Tanner, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 8

Industry Implementation of Automotive Electronic Stability Control (ESC) Systems

2008 · Nicholas J. Durisek, Kevan J. Granat · SAE International journal of passenger cars. Electronic and electrical systems · 6

Comparative Dynamic Analysis of Tire Tread Belt Detachments and Stepped Diameter (“Lumpy”) Tires

2007 · Nicholas J. Durisek, Donald F. Tandy, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 6

Conceptual design for a vehicle inertia measurement facility (VIMF)

1993 · Nicholas J. Durisek · OhioLink ETD Center (Ohio Library and Information Network) · 6

PDF

Automated Vehicle Disengagement Reaction Time Compared to Human Brake Reaction Time in Both Automobile and Motorcycle Operation

2019 · Jeffrey T. Dinges, Nicholas J. Durisek · SAE technical papers on CD-ROM/SAE technical paper series · 3

Analysis of Front Suspension Ball Joint Separations in Motor Vehicle Crashes

2009 · Nicholas J. Durisek, Kevan J. Granat, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 3

A Study of Vehicle Class Segregation Using Linear Handling Models

1995 · Mohammad O. Sultan, Gary J. Heydinger, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2

Analysis of Tapered Roller Bearing Type Hub Separations in Motor Vehicle Crashes

2007 · Robert J. Pascarella, Sye W. Linovitz, et al. · SAE technical papers on CD-ROM/SAE technical paper series · 1

Simultaneous overall measurement uncertainty reduction for multi-parameter macro-measurement system design /

1996 · Nicholas J. Durisek · OhioLink ETD Center (Ohio Library and Information Network) · 1

PDF

Application of Uncertainty Methods for the Design of Multi-Parameter Macro-Measurement Systems

1995 · Nicholas J. Durisek, Gary J. Heydinger, et al. · ASME International Mechanical Engineering Congress and Exposition (IMECE) · 1

Repeatability and Bias Study on the Vehicle Inertia Measurement Facility (VIMF)

2009 · Nicholas J. Durisek, Kevan J. Granat, et al. · SAE technical papers on CD-ROM/SAE technical paper series

Non-Rigid Body Product of Inertia Measurement: Application to Land Vehicles

1994 · Nicholas J. Durisek, Gary J. Heydinger, et al. · ASME International Mechanical Engineering Congress and Exposition (IMECE)

Works count: 23

Citation count: 226

H-index: 9

I10-index: 9