Get started
Author

Irina Fedorova

Laves-phase precipitates in a low-carbon 9% Cr martensitic steel during aging and creep at 923 K
2014 · I. Fedorova, A. Belyakov, et al. · Materials Science and Engineering A · 102
Grain refinement in a Cu–Cr–Zr alloy during multidirectional forging
2014 · I. Shakhova, Z. Yanushkevich, et al. · Materials Science and Engineering A · 78
PDF
Tempering behavior of a low nitrogen boron-added 9%Cr steel
2016 · I. Fedorova, A. Kostka, et al. · Materials Science and Engineering A · 76
High-temperature oxidation behavior of additively manufactured IN625: Effect of microstructure and grain size
2022 · Anton Chyrkin, Kerem O. Gunduz, et al. · Corrosion Science · 75
Microstructure Evolution in an Advanced 9 pct Cr Martensitic Steel during Creep at 923 K (650 °C)
2012 · Irina Fedorova, Alla Kipelova, et al. · Metallurgical and Materials Transactions A · 50
Fine (Cr,Fe)2B borides on grain boundaries in a 10Cr–0.01B martensitic steel
2018 · I. Fedorova, F. Liu, et al. · Scripta Materialia · 38
Intergranular oxidation of additively manufactured Ni-base alloy 625: The role of Si
2023 · A. Chyrkin, W.J. Nowak, et al. · Corrosion Science · 37
PDF
The effect of additive manufacturing on the initial High temperature oxidation properties of RE-containing FeCrAl alloys
2021 · K. Ozgur Gunduz, Alberto Visibile, et al. · Corrosion Science · 31
PDF
High temperature oxidation of inconel 939 produced by additive manufacturing
2024 · Alberto Visibile, Kerem Ozgur Gunduz, et al. · Corrosion Science · 28
Electrified catalytic steam reforming for renewable syngas production: Experimental demonstration, process development and techno-economic analysis
2024 · José Juan Bolívar Caballero, Ilman Nuran Zaini, et al. · Applied Energy · 11
Analyzing Boron in 9–12% Chromium Steels Using Atom Probe Tomography
2019 · Irina Fedorova, Flemming Bjerg Grumsen, et al. · Microscopy and Microanalysis · 8
Oxidation Behavior of Additively Manufactured Ti-added FeCrAl Alloys
2024 · Irina Fedorova, Mikael Kjellen, et al. · High Temperature Corrosion of Materials · 5
Microstructure and Deformation Behavior of a Hot Forged 9%Cr Creep Resistant Steel
2011 · Irina Fedorova, Zhanna Yanushkevich, et al. · Advanced materials research · 3
Precipitation and Flow Behavior of AISI 630 Stainless Steel Deformed at Elevated Temperatures
2022 · Z. Sangarimotlagh, B. Tolaminejad, et al. · Journal of Materials Engineering and Performance · 2
Evolution of Laves-Phase Particles in a Low Carbon 9%Cr Martensitic Steel during Creep at 650°C
2014 · Irina Fedorova, Andrey Belyakov, et al. · Advanced materials research · 2
On the non-equilibrium segregation of Boron in 9-12%Cr steels
2017 · Irina Fedorova, Flemming Bjerg Grumsen, et al. · Chalmers Publication Library (Chalmers University of Technology)
Influence of microstructural parameters on the fracture behavior of low-carbon steels
2015 · Laukhin, D. V., Fedorova, I. S., et al. · The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy
Влияние параметров микроструктуры на характер разрушения низкоуглеродистых сталей
2015 · D. V. Laukhin, Irina Fedorova, et al. · Металловедение и термическая обработка металлов
Works count: 18
Citation count: 546
H-index: 10
I10-index: 10
Year
Topic
Type