Author

Mohammad Reza Samadi

Observed name: MOHAMMAD REZA SAMADI

Institution: Technical and Vocational University

Observed institutions: Arak University, Technical and Vocational University, Malek Ashtar University of Technology

ORCID: 0000-0001-5323-5653

Observed ORCID: 0000-0001-5323-5653

OpenAlex ID: A5007436680

Studying the effects of FDM process parameters on the mechanical properties of parts produced from PLA using response surface methodology

2024 · Hossein Afshari, Fatemeh Taher, et al. · Colloid & Polymer Science · 34

PDF

Optimizing the mechanical properties of TiO2 / PA12 nano‐composites fabricated by SLS 3D printing

2022 · Mahmoud Afshari, Soroush Bakhshi, et al. · Polymer Engineering and Science · 28

Enhancing the tensile properties of PA6 / CNT nanocomposite in selective laser sintering process

2022 · Fatemeh Taher, Hatam Hardani, et al. · Polymer Composites · 22

An enhancement in the tensile modulus and bending resistance of polylactic acid/carbon nanotube composite by optimizing FFF process parameters

2024 · Hatam Hardani, Mahmoud Afshari, et al. · Journal of Thermoplastic Composite Materials · 21

Investigating the mechanical properties and microstructure of the weld joint obtained by laser welding of PA12 / CNT nanocomposites

2023 · Mohammad Reza Samadi, Mahmoud Afshari, et al. · Polymer Engineering and Science · 20

Optimization of FFF process parameters to improve the tensile strength and impact energy of polylactic acid/carbon nanotube composite

2024 · Hatam Hardani, Mahmoud Afshari, et al. · Polymer Engineering and Science · 18

Simultaneous enhancement of the impact strength and tensile modulus of PP/EPDM/TiO2 nanocomposite fabricated by fused filament fabrication

2023 · Fatemeh Taher, Mahmoud Afshari, et al. · Colloid & Polymer Science · 18

Friction stir welding of polypropylene based graphene nanocomposites fabricated with 3-D printing: An investigation on the microstructure and mechanical properties

2023 · Mahmoud Afshari, Hatam Hardani, et al. · Journal of Composite Materials · 18

An investigation on the friction stir welding of PP/TiO2 nanocomposites for improving the tensile strength and hardness of the weld joint

2023 · Mohammad Reza Samadi, Mohsen Ayaz, et al. · Colloid & Polymer Science · 15

Optimizing the mechanical properties of weld joint in laser welding of GTD-111 superalloy and AISI 4340 steel

2022 · Mahmoud Afshari, Fatemeh Taher, et al. · Optics & Laser Technology · 13

Simultaneous optimization of the tensile strength, bending strength, hardness and wear resistance of W Cu composite produced by sintering process

2023 · Ehsan Selahshorrad, Ebrahim Zeynali, et al. · International Journal of Refractory Metals and Hard Materials · 12

Numerical and experimental analysis of Al/GFRP joint for optimization of adhesive bonding strength using response surface method by considering surface patterning of the joints

2024 · Mohammad Reza Samadi, Mohammad Hossein Alaei, et al. · International Journal of Adhesion and Adhesives · 5

An enhancement of the yield strength and hardness in the friction stir welding of AZ31/AA3105 joint

2024 · Alireza Karimian Khozani, Seyyed Amirhossein Alavi, et al. · Journal of Adhesion Science and Technology · 4

Friction Stir Welding Process of AZ91 Mg and A319 Al Alloys for Improving the Impact Resistance, Hardness and Yield Strength of the Weld

2025 · Noushin Yasavol, Mohsen Ayaz, et al. · Journal of Materials Engineering and Performance · 3

Design and optimization of mechanical and electromagnetic properties of GFRP composite

2024 · Ehsan Talei-Fard, Hossein Parsa, et al. · Journal of Materials Science Materials in Electronics · 3

Investigation of the effect of sintering process parameters on the corrosion, wear and hardness of W–Cu composite

2024 · Ehsan Selahshorrad, Seyyed Amirhossein Alavi, et al. · Sadhana · 3

Optimizing the Mechanical Properties of the Weld in the Friction Stir Welding of Aluminum and Magnesium (A365–AZ91C)

2024 · Noushin Yasavol, Soroush Bakhshi, et al. · Journal of Advanced Manufacturing Systems · 3

Mechanical and Formability Evaluation of ST14 Alloys Welded by Friction Stir Welding

2021 · Mahmoud Afshari, Nima Fakhralmobasheri, et al. · Shock and Vibration · 2

PDF

Manufacturing alumina insulators for aircraft spark plugs via cold isostatic pressing: A numerical and experimental study

2026 · Walid M. Shewakh, Mahmoud Afshari, et al. · Ceramics International · 1

Optimizing the SLS process parameters for enhancement of mechanical, thermal and rheological properties in a new PLA/EPDM/TiO 2 /CNT nanocomposite

2026 · Walid M. Shewakh, Hatam Hardani, et al. · Journal of Composite Materials · 1

An investigation on the GFRP composite radome; enhancement of the tensile strength and dielectric constant of the samples

2025 · Ehsan Talei-Fard, Mahmoud Afshari, et al. · Polymer Bulletin · 1

Investigating the effect of hot preforming combined with superplastic forming on thickness distribution and forming time of Ti-6Al-4V alloy using finite element analysis

2025 · Seyyed Amirhossein Alavi, Mahmoud Afshari, et al. · The Journal of Strain Analysis for Engineering Design · 1

A Numerical and Experimental Investigation into the Manufacturing Process of an Inconel 600 Superalloy Shell for Aerospace Ignition Systems

2026 · Ishraga Galal-Eldin Abdalla Awad, Mahmoud Afshari, et al. · Journal of Advanced Manufacturing Systems

Investigating the mechanical and electrical properties of hybrid joint of aluminum to copper obtained by friction stir welding and brazing

2025 · Abolfazl Khademian, Alireza Karimian Khozani, et al. · Journal of Materials Science Materials in Electronics

Improvement of the Mechanical Properties and Microstructure of Aa3105/az31 Weld in Fsw Process

2024 · ALIREZA KARIMIAN KHOZANI, OMID ASVADI, et al. · Surface Review and Letters

Works count: 30

Citation count: 246

H-index: 11

I10-index: 11