Get started
Author

Serdar Özkaya

Observed names: S. Ozkaya, Serdar Ozkaya
ORCID: 0000-0001-7121-4979
Observed ORCID: 0000-0001-7121-4979
OpenAlex ID: A5008091276
Effect of the B 4 C content and the milling time on the synthesis, consolidation and mechanical properties of AlCuMg-B 4 C nanocomposites synthesized by mechanical milling
2016 · S. Ozkaya, A. Canakci · Powder Technology · 67
Optimization of Dry Sliding Wear in Hot-Pressed Al/B4C Metal Matrix Composites Using Taguchi Method and ANN
2024 · Sandra Gajević, Slavica Miladinović, et al. · Materials · 52
PDF
Formation of Fe–Al intermetallic coating on low-carbon steel by a novel mechanical alloying technique
2013 · Aykut Canakci, Fatih Erdemir, et al. · Powder Technology · 52
A Study on the Optimization of Nano-B4C Content for the Best Wear and Corrosion Properties of the Al-Based Hybrid Nanocomposites
2024 · Aykut Çanakçı, Abdullah Hasan Karabacak, et al. · Arabian Journal for Science and Engineering · 51
PDF
Effects of a new pre-milling coating process on the formation and properties of an Fe–Al intermetallic coating
2014 · A. Canakci, F. Erdemir, et al. · Powder Technology · 47
Synthesis of novel CuSn 10 ‐graphite nanocomposite powders by mechanical alloying
2014 · A. Canakci, T. Varol, et al. · Micro & Nano Letters · 47
PDF
Corrosion and wear behavior of functionally graded Al2024/SiC composites produced by hot pressing and consolidation
2015 · Fatih Erdemir, Aykut Canakci, et al. · Journal of Alloys and Compounds · 45
Effects of Fe–Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites
2020 · Aykut Canakcı, Serdar Ozkaya, et al. · Journal of Alloys and Compounds · 44
Effect of AlCrCuFeNi high entropy alloy reinforcements with and without B4C on powder characteristic, mechanical and wear properties of AA5083 metal-metal composites
2024 · Abdullah Hasan Karabacak, Aykut Çanakçı, et al. · Journal of Alloys and Compounds · 36
Effect of mechanical milling time on powder characteristic, microstructure, and mechanical properties of AA2024/B4C/GNPs hybrid nanocomposites
2024 · Müslim Çelebi, Aykut Çanakçı, et al. · Powder Technology · 35
Effect of the usage of Er,Cr:YSGG laser with and without different remineralization agents on the enamel erosion of primary teeth
2020 · Nagehan Yilmaz, Ezgi Baltaci, et al. · Lasers in Medical Science · 35
Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing
2022 · Müslim Çelebi, Aykut Çanakçı, et al. · JOM · 33
Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method
2014 · Aykut Canakci, Temel Varol, et al. · Universal Journal of Materials Science · 33
PDF
Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles
2022 · Abdullah Hasan Karabacak, Aykut Çanakçı, et al. · Silicon · 32
A study on the improvement of wear and corrosion properties of ZA40/Graphene/B4C hybrid nanocomposites
2023 · Müslim Çelebi, Aykut Çanakçı, et al. · Journal of Alloys and Compounds · 28
Microstructure and Abrasive Wear Behavior of CuSn10–Graphite Composites Produced by Powder Metallurgy
2014 · A. Canakci, H. Cuvalci, et al. · Powder Metallurgy and Metal Ceramics · 28
Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites
2016 · T. Varol, A. Canakci, et al. · Particulate Science And Technology · 26
New Coating Technique for Al–B4C Composite Coatings by Mechanical Milling and Composite Coating
2015 · A. Canakci, T. Varol, et al. · Powder Metallurgy and Metal Ceramics · 26
Microstructure and properties of Fe–Al intermetallic coatings on the low carbon steel synthesized by mechanical alloying
2014 · A. Canakci, T. Varol, et al. · The International Journal of Advanced Manufacturing Technology · 26
PDF
Comparative study of powder characteristics and mechanical properties of Al2024 nanocomposites reinforced with carbon-based additives
2025 · Müslim Çelebi, Aykut Çanakçı, et al. · Advanced Powder Technology · 25
Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling
2017 · T. Varol, A. Canakci, et al. · Particulate Science And Technology · 24
Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites
2020 · Abdullah Hasan Karabacak, Aykut Çanakçı, et al. · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · 23
The effects of different types and ratios of reinforcement, and machining processes on the machinability of Al2024 alloy nanocomposites
2023 · Abdullah Hasan Karabacak, Aykut Canakci, et al. · Journal of Composite Materials · 21
Investigation of corrosion resistance and impact performance properties of Al2O3/SiC-doped aluminium-based composites
2023 · Uğur Çalıgülü, M Vahittin Kaçmış, et al. · Bulletin of Materials Science · 18
Determination of Effect of B4C Content on Density and Tensile Strength of AA7075/ B4C Composite Produced via Powder Technology
2015 · Cihad Nazık, Necmettin Tarakçıoğlu, et al. · International Journal of Materials Mechanics and Manufacturing · 17
PDF
Works count: 50
Citation count: 993
H-index: 22
I10-index: 30
Year
Topic
Type