Author

Jonas Edberg

Observed names: Edberg, Jonas, J. Edberg

Observed institution: Luleå University of Technology

ORCID: 0000-0002-7298-020X

Observed ORCID: 0000-0002-7298-020X

OpenAlex ID: A5008281652

Explicit versus implicit finite element formulation in simulation of rolling

1990 · Lars-Erik Lindgren, Jonas Edberg · Journal of Materials Processing Technology · 32

Shot peening simulated by two different finite element formulations

1995 · Jonas Edberg, Lars‐Erik Lindgren, et al. · 29

Modeling and simulation of weld solidification cracking part III: Simulation of solidification cracking in Varestraint tests of alloy 718

2019 · J. Draxler, J. Edberg, et al. · Welding in the World · 21

PDF

Modeling and simulation of weld solidification cracking part II: A model for estimation of grain boundary liquid pressure in a columnar dendritic microstructure

2019 · J. Draxler, J. Edberg, et al. · Welding in the World · 14

PDF

Simulation of microstructural evolution during repair welding of an IN718 plate

2016 · M. Fisk, A. Lundbäck, et al. · Finite Elements in Analysis and Design · 13

Efficient three‐dimensional model of rolling using an explicit finite‐element formulation

1993 · Jonas Edberg, Lars‐Erik Lindgren · Communications in Numerical Methods in Engineering · 10

Modeling and simulation of weld solidification cracking part I: A pore-based crack criterion

2019 · J. Draxler, J. Edberg, et al. · Welding in the World · 9

PDF

Modeling of thermal stresses in low alloy steels

2019 · Lars-Erik Lindgren, Jonas Edberg, et al. · Journal of Thermal Stresses · 9

Heat transfer in cold rolling process of AA8015 alloy: a case study of 2-D FE simulation of coupled thermo-mechanical modeling

2018 · O. Olaogun, J. Edberg, et al. · The International Journal of Advanced Manufacturing Technology · 8

Contact forces and deformations in plate rolling

2026 · Lars-Erik Lindgren, Jonas Edberg · CRC Press eBooks · 5

Three-dimensional simulation of plate rolling using different friction models

1992 · Jonas Edberg · 5

The wedge rolling test

1994 · Jonas Edberg, Lars-Erik Lindgren, et al. · Journal of Materials Processing Technology · 4

Challenges in Finite Element Simulations of Chain of Manufacturing Processes

2013 · Lars Erik Lindgren, Andreas Lundbäck, et al. · Materials science forum · 2

Use of Indicators for Hot and Warm Cracking in Welded Structures

2016 · J. Edberg, J. Andersson · Procedia Manufacturing · 1

PDF

Roll Forming

2014 · Michael Lindgren, Jonas Edberg, et al. · Springer eBooks · 1

Computational modeling of hot rolling

1993 · Jonas Edberg · Diva portal (Dalarna University Library) · 1

A numerical model for simulating the effect of strain rate on eutectic band thickness

2020 · J. Draxler, P. Åkerström, et al. · Welding in the World

PDF

Comarison of two different indicators for hot cracking in welded structures

2018 · Jonas Edberg, J. Draxler

Roll Forming

2014 · Michael Lindgren, Jonas Edberg, et al. · Springer eBooks

An electrified vehicle support system - based on the CoP process

2010 · Jonas Edberg, Fredrik Hedström, et al. · Chalmers Publication Library (Chalmers University of Technology)

Simulation of braking of railway wheel

2003 · Jonas Edberg, Dan Larsson, et al.

Coupled thermomechanical simulation of hot rolling using an adaptive mesh

1998 · Vahid Kalhori, Lars‐Erik Lindgren, et al.

Works count: 23

Citation count: 164

H-index: 8

I10-index: 6