Author

Tatyana Nikonova

Observed names: Nikonova, Tatyana, T Nikonova, T Yu Nikonova, T. Nikonova, T. Yu. Nikonova, T.Yu Nikonova, T.Yu. Nikonova, Tat'yana Nikonova, Tatyana NIKONOVA

Institution: Belarusian State Technological University

Observed institutions: Belarusian State Technological University, Vilnius Gediminas Technical University, National University Zaporizhzhia Polytechnic, Peter the Great St. Petersburg Polytechnic University, Institute of Service and Entrepreneurship of DGTU, Tashkent State Technical University named after Islam Karimov, Don State Technical University, Kokshetau State University, S.Seifullin Kazakh Agro Technical University, Abylkas Saginov Karaganda Technical University, Navoi State University of Mining and Technologies, Angel Kanchev University of Ruse, Poznań University of Technology, Ural State Mining University

ORCID: 0000-0002-6539-1263

Observed ORCID: 0000-0002-6539-1263

OpenAlex ID: A5008976542

The development of the computer-aided design system for production processes of component part machining for single-piece production and repair conditions

2019 · Gulnara Zhetessova, Vasiliy Yurchenko, et al. · Istrazivanja i projektovanja za privredu · 43

PDF

Modeling Arc Spraying Process for Eccentric Sleeve of Cone Crusher GP 500 Using Computer-Aided Design

2019 · Saulekul Aizhambaeva, Gulnara Zhetessova, et al. · Materials science forum · 33

Experimental Studies of the Application of the Methodology of Kazakhstan’s CAD of Technological Processes for Manufacturing Parts of Mining Machines and the Development of Recommendations

2018 · G. S. Zhetessova, V. V. Yurchenko, et al. · Russian Internet Journal of Industrial Engineering · 33

Environmental management in automated systems for engineering production

2020 · G S Zhetessova, V V Yurchenko, et al. · IOP Conference Series Materials Science and Engineering · 32

PDF

Research and Analysis of Cad for Tp Mechanical Engineering Production

2018 · Гульнара Жетесова, Василий Юрченко, et al. · 29

Effect of Laser Processing Parameters on Microstructure, Hardness and Tribology of NiCrCoFeCBSi/WC Coatings

2021 · Jelena Škamat, Olegas Černašėjus, et al. · Materials · 26

PDF

Parametric Optimization of a New Gear Pump Casing Based on Weight Using a Finite Element Method

2023 · Olga Zharkevich, Tatyana Nikonova, et al. · Applied Sciences · 24

PDF

A Comparative Analysis of the Dynamic Strength Properties of the Long Guides of Intelligent Machines for a New Method of the Thermal Spraying of Polymer Concrete

2022 · Gulnara Zhetessova, Tatyana Nikonova, et al. · Applied Sciences · 16

PDF

Developing a Measuring System for Monitoring the Thickness of the 6 m Wide HDPE/LDPE Polymer Geomembrane with Its Continuous Flow Using Automation Equipment

2021 · Tatyana Nikonova, Olga Zharkevich, et al. · Applied Sciences · 15

PDF

Improving the Design of a Multi-Gear Pump Switchgear Using CFD Analysis

2024 · Olga Zharkevich, Tatyana Nikonova, et al. · Applied Sciences · 12

Comparative Analysis of Strength Fatigue Properties and Abrasive Wear Resistance for a New Composition of Polymer Concrete Coated with Metal Alloy Powders

2023 · Tatyana Nikonova, Łukasz Gierz, et al. · Coatings · 11

PDF

Simulation of the distribution of temperature, stresses and deformations during splined shafts hardfacing

2023 · Oxana Nurzhanova, Olga Zharkevich, et al. · Istrazivanja i projektovanja za privredu · 7

PDF

Mathematical modeling of vibroburnishing of the hole of cylinder

2018 · Tatyana Nikonova, Gulnara Zhetessova, et al. · Istrazivanja i projektovanja za privredu · 6

PDF

Implementation of Simulation Modeling of Single and High-Volume Machine-Building Productions

2024 · Nadezhda Savelyeva, Tatyana Nikonova, et al. · Designs · 5

PDF

Modification of the Structure and Elastic-Strength Properties of Elastomers Based on Nitrile Butadiene Rubber with the X-ray

2025 · N. G. Valko, A. V. Kasperovich, et al. · Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques · 4

CFD-FEM Analysis for Functionality Prediction of Multi-Gear Pumps

2024 · Olga Zharkevich, Olga Reshetnikova, et al. · Designs · 4

PDF

Oscillating Laser Post-Processing of NiCrCoFeCBSi/WC Thermally Sprayed Coatings

2022 · Olegas Černašėjus, Jelena Škamat, et al. · Materials · 2

PDF

Control of Physical Processes in an Extrusion Line Polymer Sleeves Production

2022 · Tatyana Nikonova, Łukasz Gierz, et al. · Applied Sciences · 2

PDF

Preparation of the Surface of Long-Dimensional Rods of Hydro-Cylinders for Thermal Spraying Using an Abrasive Jet

2022 · Gulnara Zhetessova, Tatyana Nikonova, et al. · Coatings · 2

PDF

Studying the Processes that Take Place in Vibroabrasive Machining of Complex-Shaped Parts

2022 · T. Zhanibekov, T. Nikonova, et al. · Material and Mechanical Engineering Technology · 1

Analysis of modern coating materials

2021 · G.S. Zhetesova, E. Shkamat, et al. · 1

Processing of a Part Such as a Composite Bearing Housing on a Milling Machine With a Digital Control Program

2024 · T Nikonova, D Kabidenov, et al. · Material and Mechanical Engineering Technology

PDF

Strength study of machine tool beds with curvilinear stiffeners from polymer concrete

2024 · Alexandra Berg, Oxana Nurzhanova, et al. · Istrazivanja i projektovanja za privredu

PDF

Analysis of the Processes in the Hydraulic System of a Surface Grinding Machine with a Reversible Table Movement Affecting the Quality of Processing and the Efficiency of the Drive

2023 · Tatyana NIKONOVA, Azat KAMZE, et al. · Trudy Universiteta

Investigation of Breakdowns of Loaded Parts of Dump Trucks Operating Under Severe Operating Conditions

2023 · Tatyana NIKONOVA, Gulnara ZHETESSOVA, et al. · Trudy Universiteta

Works count: 41

Citation count: 308

H-index: 11

I10-index: 11