Get started
Author

A. N. Md Idriss

Observed names: A. N. Md. Idriss, A.N. Idriss, A.N. M. Idriss, A.N. Md Idriss, A.N.Md Idriss, Ahmed Nazrin Md Idriss
ORCID: 0000-0001-5832-3847
Observed ORCID: 0000-0001-5832-3847
OpenAlex ID: A5009212976
Effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic
2013 · M.K. Nor Khairusshima, C.H. Che Hassan, et al. · Wear · 87
Melting of multipass surface tracks in steel incorporating titanium carbide powders
2014 · S. Mridha, A. N. Md Idriss, et al. · Materials Science and Technology · 27
Incorporation of TiC Particulates on AISI 4340 Low Alloy Steel Surfaces via Tungsten Inert Gas Arc Melting
2012 · S. Mridha, A.N.Md Idriss, et al. · Advanced materials research · 26
PDF
Processing of TiC-CNT Hybrid Composite Coating on Low Alloy Steel Using TIG Torch Technique
2013 · M.A. Maleque, Kamilu Adeyemi Bello, et al. · Applied Mechanics and Materials · 24
Microstructural aspects of wear behaviour of TiC coated low alloy steel
2016 · A. N. Md Idriss, M. A. Maleque, et al. · Materials Science and Technology · 13
EFFECT OF VOLTAGE ON THE CONSOLIDATION OF TiC PARTICULATES ON STEEL SUBSTRATE FUSED BY TIG WELDING ARC
2012 · Shahjahan Mridha, A. N. Md Idriss, et al. · The International Islamic University Malaysia Repository (The International Islamic University Malaysia) · 13
Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles
2017 · A. N. Md Idriss, M. A. Maleque, et al. · Materials Science and Technology · 11
Laser and GTAW torch processing of Fe–Cr–B coatings on steel
2014 · A. N. Md. Idriss, S. Mridha, et al. · Materials Science and Technology · 8
Microstructure of TIG Melted Composite Coating on Steel Produced Using 1.0 and 1.5 mg/mm2 TiC at an Energy Input of 2640 J/mm
2012 · A.N. M. Idriss, S. Mridha · Advanced materials research · 8
Composite Coating on Steel Surfaces by Adding TiC and h-BN Particulates under TIG Torch Melting
2012 · S. Mridha, N.I. Taib, et al. · Advanced materials research · 6
Synthetization of TiC surface hardening using TIG melting technique - The effect of working distance
2022 · A. N. Md Idriss, M. A. Maleque, et al. · IOP Conference Series Materials Science and Engineering · 5
PDF
Laser and GTAW torch processing of Fe–Cr–B coatings on steel
2013 · A. N. Md Idriss, S. Mridha, et al. · Materials Science and Technology · 4
The dry sliding wear behaviour of open cell aluminum foam against mild steel
2022 · A.N. Md Idriss, S. Kasolang · IOP Conference Series Materials Science and Engineering · 2
PDF
The Permeability of Palm Oil Through Open Cell Aluminum Foam Under the Influence of Gravity
2022 · A. N. Md Idriss, S. Kasolang · Lecture notes in mechanical engineering · 1
Literature Survey on Manufacturing Alumina/Aluminum MMC by Stir Casting and Their Wear Behaviors with and Without Solid Lubrication
2022 · A. N. Md Idriss, S. Kasolang, et al. · Lecture notes in mechanical engineering · 1
Incorporation of TiC particles on AlSi 4340 low alloy steel surfaces via tungsten inert gas melting
2011 · Shahjahan Mridha, A. N. Md Idriss, et al. · Strathprints: The University of Strathclyde institutional repository (University of Strathclyde) · 1
PDF
The Compressive Strength and Failure Behaviours of the Alporas Foam—Effect of Different Geometric Sizes
2025 · A. N. Md Idriss, S. Kasolang, et al. · Lecture notes in mechanical engineering
Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
2024 · Lailatul Harina Paijan, Md Abdul Maleque, et al. · International Journal of Nanoelectronics and Materials (IJNeaM)
PDF
The Effect of Preheating and Current on the Development of Mild Steel Clad Layers via Stick Welding
2024 · Ahmed Nazrin Md Idriss, Md Abdul Maleque, et al. · Journal of Advanced Research in Applied Mechanics
PDF
Comparative Study on Performance Characteristics of Modified Alloy Steels by TIG and Water Jet Peening Processes
2023 · A. Azhari, A. N. Md Idriss, et al. · Lecture notes in mechanical engineering
PDF
Demographic Changes by the Vickers Microhardness Surface Indentations on the TiC Metal Matrix Composite TIG Melted Track
2022 · A. N. Md Idriss, S. Kasolang, et al. · Lecture notes in mechanical engineering
The effect of working distances on the formation of TiC composite surface hardening using TIG melting technique
2021 · A. N. Md Idriss, Md. Abdul Maleque, et al. · The International Islamic University Malaysia Repository (The International Islamic University Malaysia)
PDF
Failure of woven fiber glass epoxy composite under charpy impact loading
2012 · A. N. Md Idriss, Md. Abdul Maleque, et al.
Impact strength behaviour of the woven and chopped fiber glass composites at different temperatures
2011 · A. N. Md Idriss, Shahjahan Mridha · IIUM Press eBooks
Variation of fiber architecture on loads applied in fabrication of epoxy/woven fiber glass composites
2011 · A. N. Md Idriss, Shahjahan Mridha
Works count: 26
Citation count: 237
H-index: 8
I10-index: 7
Year
Topic
Type