Get started
Author

Gongyu Liu

Advances in micro milling: From tool fabrication to process outcomes
2020 · Ni Chen, Hao Nan Li, et al. · International Journal of Machine Tools and Manufacture · 285
Occurrence and formation mechanism of surface cavity defects during orthogonal milling of CFRP laminates
2016 · Changying Wang, Gongyu Liu, et al. · Composites Part B Engineering · 175
Experimental investigation on machinability of DMLS Ti6Al4V under dry drilling process
2019 · Jiaqiang Dang, Gongyu Liu, et al. · Materials and Manufacturing Processes · 63
Preheating assisted wire EDM of semi-conductive CFRPs: Principle and anisotropy
2020 · Chaoqun Wu, Shiyu Cao, et al. · Journal of Materials Processing Technology · 58
A novel method for tool condition monitoring based on long short-term memory and hidden Markov model hybrid framework in high-speed milling Ti-6Al-4V
2019 · Zhengrui Tao, Qinglong An, et al. · The International Journal of Advanced Manufacturing Technology · 54
FDM 3D printed MXene/Recycled carbon fibre reinforced polylactic acid composites: Interface optimization, toughening and enhanced electromagnetic shielding performance
2024 · Yunzhongze Hu, Jiafei Gu, et al. · Composites Communications · 52
Subsurface damage evaluation in the single abrasive scratching of BK7 glass by considering coupling effect of strain rate and temperature
2021 · Huan Qi, Liwu Shi, et al. · Ceramics International · 47
Study on the Frictional Heat at Tool-Work Interface when Drilling CFRP Composites
2018 · Jinyang Xu, Chao Li, et al. · Procedia Manufacturing · 46
PDF
Controllable generation of 3D textured abrasive tools via multiple-pass laser ablation
2021 · Hao Nan Li, Yong Jie Zhao, et al. · Journal of Materials Processing Technology · 42
Lightweight, multifunctional recycled carbon fibre/MXene/PEDOT: PSS nonwoven veils with double-layered structure for excellent electromagnetic interference shielding
2024 · Yunzhongze Hu, Minqiang Jiang, et al. · Chemical Engineering Journal · 33
Scalable and sustainable electromagnetic shielding and fireproofing enhancement of carbon fiber reinforced plastics using MXene-infused reclaimed carbon fiber veils
2025 · Yunzhongze Hu, Xiaosu Yi, et al. · Journal of Material Science and Technology · 25
Multifunctional N-doped MXene/Ammonium polyphosphate reclaimed carbon fiber veil for enhanced electromagnetic shielding, flame retardance, and thermal efficiency
2024 · Yunzhongze Hu, Yang Zhang, et al. · Carbon · 24
Numerical and experimental investigation on grinding-induced exit burr formation
2019 · Gongyu Liu, Jiaqiang Dang, et al. · The International Journal of Advanced Manufacturing Technology · 18
On the prediction of hole geometry in laser trepanning drilling: A generic 3D analytical model considering drill system structure
2024 · Muyang Ye, Haohua Xiu, et al. · Optics & Laser Technology · 15
Investigation on the vibration and machined surface quality in tilt side milling of thin-walled plates
2019 · Gongyu Liu, Jiaqiang Dang, et al. · The International Journal of Advanced Manufacturing Technology · 14
Effects of tool helix angles on machined surface morphology in tilt side milling of cantilever thin-walled plates
2018 · Ming Chen, Gongyu Liu, et al. · Procedia CIRP · 14
PDF
Analytical modelling of edge chipping in scratch of soda-lime glass considering strain-rate hardening effect
2021 · Haoyu Shi, Gongyu Liu, et al. · Ceramics International · 13
A new method for deburring of servo valve core edge based on ultraprecision cutting with the designed monocrystalline diamond tool
2019 · QingLong An, JiaQiang Dang, et al. · Science China Technological Sciences · 12
High-Quality Machining of Edges of Thin-Walled Plates by Tilt Side Milling Based on an Analytical Force-Based Model
2019 · Gongyu Liu, Jiaqiang Dang, et al. · Journal of Manufacturing Science and Engineering · 12
3D printed zirconia ceramic tool for bone repair with multifunction of drug release, drilling and implantation
2024 · Bixuan Wang, Yongjie Zhao, et al. · Ceramics International · 11
Parametric study on the tool inclination angle for side milling thin-walled workpiece edges based on finite element simulation
2019 · Gongyu Liu, Jiaqiang Dang, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 10
Preventing thermal osteonecrosis through 3D printed ceramic grinding tool
2023 · Bixuan Wang, Yongjie Zhao, et al. · Additive manufacturing · 9
PDF
The fabrication of laser-induced graphene on nomex paper: Effects of process parameters and flexible wearable applications
2025 · Kunyang Li, Gongyu Liu, et al. · Optics & Laser Technology · 6
Rotary laser thinning of silicon wafer via diffractive optical element: Effects of process parameters on surface integrity
2025 · Qingfeng Li, Yizheng Wang, et al. · Journal of Manufacturing Processes · 5
Integrating 3D Printed Grinding Tools and Closed‐Loop Temperature Management for Optimal Surgical Outcomes
2024 · Bixuan Wang, Kunyang Li, et al. · Advanced Materials Technologies · 5
Works count: 36
Citation count: 1,058
H-index: 14
I10-index: 21
Year
Topic
Type