Author

Eifion Jewell

Observed names: E H Jewell, E. H. Jewell, E. Jewell, E.H. Jewell, Eifion H. Jewell, Eifion Huw Jewell, Jewell Eifion

Observed institutions: Swansea University, Welsh Centre for Printing and Coating, University of Wales

ORCID: 0000-0002-6894-2251

Observed ORCID: 0000-0002-6894-2251

OpenAlex ID: A5010125685

All Printable Perovskite Solar Modules with 198 cm2 Active Area and Over 6% Efficiency

2018 · Francesca De Rossi, Jenny A. Baker, et al. · Advanced Materials Technologies · 144

Photonic flash-annealing of lead halide perovskite solar cells in 1 ms

2016 · Joel Troughton, Matthew J. Carnie, et al. · Journal of Materials Chemistry A · 114

High-speed imaging the effect of snap-off distance and squeegee speed on the ink transfer mechanism of screen-printed carbon pastes

2019 · Sarah-Jane Potts, Chris Phillips, et al. · Journal of Coatings Technology and Research · 62

PDF

Homogeneous and highly controlled deposition of low viscosity inks and application on fully printable perovskite solar cells

2017 · Simone M. P. Meroni, Youmna Mouhamad, et al. · Science and Technology of Advanced Materials · 53

PDF

Green solvent engineering for enhanced performance and reproducibility in printed carbon-based mesoscopic perovskite solar cells and modules

2021 · C. Worsley, D. Raptis, et al. · Materials Advances · 51

PDF

Material and process optimization screen printing carbon graphite pastes for mass production of heating elements

2016 · Bruce Philip, Eifion Jewell, et al. · Journal of Manufacturing Processes · 49

Characterising the discharge cycle of CaCl 2 and LiNO 3 hydrated salts within a vermiculite composite scaffold for thermochemical storage

2017 · R.J. Sutton, E. Jewell, et al. · Energy and Buildings · 47

The Effect of Carbon Ink Rheology on Ink Separation Mechanisms in Screen-Printing

2020 · Sarah-Jane Potts, Chris Phillips, et al. · Coatings · 42

PDF

A Multi-Criteria Decision Making (Mcdm) Methodology for High Temperature Heat Storage Material Selection Using Graph Theory and Matrix Approach

2022 · Sahand Hosouli, Jonathon Elvins, et al. · Materials & Design · 40

PDF

Improved Manufacturing Performance of Screen Printed Carbon Electrodes through Material Formulation

2016 · Eifion Jewell, Bruce Philip, et al. · Biosensors · 38

PDF

The influence of carbon morphologies and concentrations on the rheology and electrical performance of screen-printed carbon pastes

2022 · Sarah-Jane Potts, Tatyana Korochkina, et al. · Journal of Materials Science · 28

PDF

Discharge performance of blended salt in matrix materials for low enthalpy thermochemical storage

2018 · R. Sutton, E. Jewell, et al. · Applied Thermal Engineering · 28

The impact of carbon content and mesh on the characteristics of screen printed conductive structures

2013 · E.H. Jewell, S.M. Hamblyn, et al. · Circuit World · 26

Meniscus Guide Slot-Die Coating For Roll-to-Roll Perovskite Solar Cells

2019 · Daniel Burkitt, Peter Greenwood, et al. · MRS Advances · 25

Experimental and numerical investigation into nonlinear deformation of silicone rubber pads during ink transfer process

2008 · T.V. Korochkina, E.H. Jewell, et al. · Polymer Testing · 25

Deposition of High Conductivity Low Silver Content Materials by Screen Printing

2015 · Eifion Jewell, Simon Hamblyn, et al. · Coatings · 23

PDF

The impact of solvent characteristics on performance and process stability of printed carbon resistive materials

2016 · Bruce Philip, Eifion Jewell, et al. · Journal of Coatings Technology and Research · 20

PDF

Photonic sintering of copper for rapid processing of thick film conducting circuits on FTO coated glass

2023 · Bahaa Abbas, Eifion Jewell, et al. · Scientific Reports · 19

PDF

Optimisation of CaCl2 impregnated expanded graphite and alginate matrices – Targeted salt loading

2024 · Jack Reynolds, Bahaa Abbas, et al. · Energy Conversion and Management · 17

PDF

Techniques for In Situ Monitoring the Performance of Organic Coatings and Their Applicability to the Pre-Finished Steel Industry: A Review

2021 · Tim Savill, Eifion Jewell · Sensors · 17

PDF

Surface and Adhesion Characteristics of Current and Next Generation Steel Packaging Materials

2018 · Christopher Melvin, Eifion Jewell, et al. · Journal of Packaging Technology and Research · 16

PDF

Viscosity control in the screen printing of ceramic transfers

2003 · E H Jewell, T C Claypole, et al. · Surface Coatings International Part B Coatings Transactions · 16

Enhancing the Performance of the Mesoporous TiO2 Film in Printed Perovskite Photovoltaics through High‐Speed Imaging and Ink Rheology Techniques

2024 · Sarah‐Jane Potts, Rebecca Bolton, et al. · Advanced Functional Materials · 15

PDF

Inter-layer Adhesion Performance of Steel Packaging Materials for Food Cans Under Retort Conditions

2018 · Andrew Allman, Eifion Jewell, et al. · Journal of Packaging Technology and Research · 15

PDF

The Effect of Sliding Speed on the Tribological Properties of Ceramic Materials

2023 · Giovanni Paolo Alparone, David Penney, et al. · Materials · 13

PDF

Works count: 103

Citation count: 1,142

H-index: 18

I10-index: 30