Author

Vahid M. Khojastehnezhad

Observed names: Khojastehnezhad, Vahid M, Vahid M Khojastehnezhad

Institution: Cyprus International University

Observed institutions: Cyprus International University, Eastern Mediterranean University

ORCID: 0009-0003-9509-3237

Observed ORCID: 0009-0003-9509-3237

OpenAlex ID: A5010241055

Solar energy status in the world: A comprehensive review

2023 · Hamed H. Pourasl, Reza Vatankhah Barenji, et al. · Energy Reports · 567

Wear properties of Al–Al 2 O 3 /TiB 2 surface hybrid composite layer prepared by friction stir process

2015 · Reza Vatankhah Barenji, Vahid M Khojastehnezhad, et al. · Journal of Composite Materials · 66

Microstructural characterization and mechanical properties of aluminum 6061-T6 plates welded with copper insert plate (Al/Cu/Al) using friction stir welding

2018 · Vahid M. Khojastehnezhad, Hamed H. Pourasl · Transactions of Nonferrous Metals Society of China · 62

Electrical discharge machining of the AISI D6 tool steel: Prediction and modeling of the material removal rate and tool wear ratio

2016 · Reza Vatankhah Barenji, Hamed H. Pourasl, et al. · Precision Engineering · 55

Techno-economic comparison of fixed and tracking flat plate solar collectors in the northern hemisphere

2022 · Arian Bahrami, Chiemeka Onyeka Okoye, et al. · Journal of Cleaner Production · 25

The Performance Prediction of Electrical Discharge Machining of AISI D6 Tool Steel Using ANN and ANFIS Techniques: A Comparative Study

2022 · Hamed H. Pourasl, Mousa Javidani, et al. · Crystals · 24

PDF

Effect of tool pin profile on the microstructure and mechanical properties of friction stir processed Al6061/Al 2 O 3 —TiB 2 surface hybrid composite layer

2017 · Vahid M Khojastehnezhad, Hamed H Pourasl, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 23

Techno-economic analysis of wind energy potential in Kazakhstan

2021 · Hamed H Pourasl, Vahid M Khojastehnezhad · Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy · 15

Size-dependent free vibration of functionally graded beams with a tip nanoparticle and a nonlinear spring constraint via strain gradient theory

2022 · Arian Bahrami, Ali Zargaripoor, et al. · Mechanics of Advanced Materials and Structures · 12

Estimation of mechanical properties of friction stir processed Al 6061/Al 2 O 3 -Tib 2 hybrid metal matrix composite layer via artificial neural network and response surface methodology

2021 · Vahid M Khojastehnezhad, Hamed H Pourasl, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 10

Elucidating the effect of electrical discharge machining parameters on the surface roughness of AISI D6 tool steel using response surface method

2017 · Hamed H. Pourasl, Reza Vatankhah Barenji, et al. · Eastern Mediterranean University Institutional Repository (Eastern Mediterranean University) · 6

The effect of structure geometry on flexural characteristics of 3D printed acrylonitrile butadiene styrene (ABS) beams: Experimental and numerical study

2025 · Vahid M Khojastehnezhad, Hamed H Pourasl, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 2

Flow Structures in the Wake Region of Two Inclined Flat Plates in a Symmetrical Tandem Arrangement

2023 · Arian Bahrami, Hamed H. Pourasl, et al. · International Journal of Fluid Mechanics Research · 1

Resonance frequencies of functionally graded nanocantilevers subjected to nonlinear spring constraint and attached nanoparticle

2022 · Arian Bahrami, Ali Zargaripoor, et al. · Acta Mechanica · 1

Microstructures and Mechanical Properties of Al 6061 /Al2O3-TiB2 Hybrid Nano-Composite layer Produced via Friction Stir Processing Using Optimized Process Parameters

2019 · Vahid M. Khojastehnezhad · Eastern Mediterranean University Institutional Repository (Eastern Mediterranean University) · 1

PDF

Flexural behavior and failure mechanisms of multi-material fused filament fabrication beams: Experimental, microstructural, and numerical analysis

2026 · Vahid M Khojastehnezhad, Hamed H Pourasl, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications

Flow Structures in the Wake Region of an L-shaped Cylinder and a Triangular Cylinder

2024 · Arian Bahrami, Hamed H. Pourasl, et al. · International Journal of Fluid Mechanics Research

Works count: 20

Citation count: 870

H-index: 10

I10-index: 10