Product
Help
Pricing
About
Jobs
Log in
Get started
Author
Add to collection
Milton Pereira
Observed names:
M Pereira,
M. Pereira,
M.G. Pereira
Institution:
Universidade Federal de Santa Catarina
Observed institutions:
Instituto Tecnológico de Aeronáutica,
University of Groningen,
Universidade Federal de Santa Catarina,
Laser Zentrum Hannover,
Instituto Federal de Educação, Ciência e Tecnologia de Santa Catarina
ORCID:
0000-0001-7059-5423
Observed ORCID:
0000-0001-7059-5423
OpenAlex ID:
A5011417237
Abrasion resistance of Ni-Cr-B-Si coating deposited by laser cladding process
2019
·
Jurandir Marcos Sá de Sousa
, Francisco Ratusznei
, et al.
·
Tribology International
·
74
Lack of fusion mitigation in directed energy deposition with laser (DED-L) additive manufacturing through laser remelting
2021
·
Luiz Eduardo dos Santos Paes
, Milton Pereira
, et al.
·
Journal of Manufacturing Processes
·
71
PDF
Process observation in fiber laser–based selective laser melting
2014
·
Ulrich Thombansen
, Alexander Gatej
, et al.
·
Optical Engineering
·
54
PDF
Understanding the behavior of laser surface remelting after directed energy deposition additive manufacturing through comparing the use of iron and Inconel powders
2021
·
Luiz Eduardo dos Santos Paes
, Milton Pereira
, et al.
·
Journal of Manufacturing Processes
·
47
PDF
The effect of laser surface textures on the adhesion strength and corrosion protection of organic coatings - Experimental assessment using the pull-off test and the shaft load blister test
2023
·
S.J. Caraguay
, T.S. Pereira
, et al.
·
Progress in Organic Coatings
·
44
Modeling layer geometry in directed energy deposition with laser for additive manufacturing
2021
·
Luiz Eduardo dos Santos Paes
, Henrique Santos Ferreira
, et al.
·
Surface and Coatings Technology
·
39
PDF
The effect of laser surface textures on the corrosion resistance of epoxy coated steel exposed to aggressive environments for offshore applications
2022
·
S.J. Caraguay
, T.S. Pereira
, et al.
·
Surface and Coatings Technology
·
36
A thermal analysis in laser welding using inverse problems
2018
·
Elisan dos Santos Magalhães
, Luiz Eduardo dos Santos Paes
, et al.
·
International Communications in Heat and Mass Transfer
·
28
PDF
A convolutional neural network approach on bead geometry estimation for a laser cladding system
2019
·
Denise Albertazzi Gonçalves
, Marcelo Ricardo Stemmer
, et al.
·
The International Journal of Advanced Manufacturing Technology
·
26
Analysis of Interlayer Idle Time as a Temperature Control Technique in Additive Manufacturing of Thick Walls by Means of CMT and CMT Pulse Welding Processes
2020
·
Régis Henrique Gonçalves e Silva
, Pedro Correa Jaeger Rocha
, et al.
·
Soldagem & Inspeção
·
25
PDF
Laser remelting of WC-CoCr surface coated by HVOF: Effect on the tribological properties and energy efficiency
2021
·
Richard de Medeiros Castro
, Elvys Isaías Mercado Curi
, et al.
·
Surface and Coatings Technology
·
24
PDF
Assessment of power modulation formats on penetration depth for laser welding
2021
·
Francisco Cavilha Neto
, Milton Pereira
, et al.
·
Journal of the Brazilian Society of Mechanical Sciences and Engineering
·
24
Estimating the Absorption Efficiency in a Laser Welding Process Using a Nonlinear Inverse Problem Method
2022
·
Rodrigo Gustavo Dourado da Silva
, Elisan dos Santos Magalhães
, et al.
·
International Journal of Thermal Sciences
·
23
Comparison of methods to correlate input parameters with depth of penetration in LASER welding
2018
·
Luiz Eduardo dos Santos Paes
, Milton Pereira
, et al.
·
The International Journal of Advanced Manufacturing Technology
·
20
Effect of power modulation frequency on porosity formation in laser welding of SAE 1020 steels
2021
·
Francisco Cavilha Neto
, Milton Pereira
, et al.
·
The International Journal of Advanced Manufacturing Technology
·
19
Tribological comparison of Inconel 625 coatings deposited via laser metal deposition and tungsten inert gas welding process
2020
·
Rafael Gomes Nunes Silva
, Adriano de Souza Pinto Pereira
, et al.
·
Journal of Laser Applications
·
19
Power and welding speed influence on bead quality for overlapped joint laser welding
2019
·
Luiz Eduardo dos Santos Paes
, Milton Pereira
, et al.
·
Journal of Laser Applications
·
19
Laser power modulation to grain refinement of SAE 1045 steel welds
2020
·
Francisco Cavilha Neto
, Marcio Celso Fredel
, et al.
·
Journal of Laser Applications
·
18
Laser cladding of Metco 1040® (Fe-V-Mn-C) on Hadfield steel: Effect of processing parameters on microstructure and wear resistance
2021
·
Moisés F. Teixeira
, Jeferson T. Pacheco
, et al.
·
Optics & Laser Technology
·
15
Measurement of Cut Front Properties in Laser Cutting
2014
·
Ulrich Thombansen
, Torsten Hermanns
, et al.
·
Physics Procedia
·
15
A comparison between LBW and hybrid laser-GMAW processes based on microstructure and weld geometry for hardenable steels
2020
·
Rafael Gomes Nunes Silva
, Caroline Mano Monteiro de Paço
, et al.
·
The International Journal of Advanced Manufacturing Technology
·
14
Study of the effects of the laser remelting process on the microstructure and properties of the WC–10Co–4Cr coating sprayed by HVOF
2020
·
Renato Camponogara Panziera
, Ana Claudia Costa de Oliveira
, et al.
·
Journal of the Brazilian Society of Mechanical Sciences and Engineering
·
14
Powder degradation as a consequence of laser interaction: A study of SS 316L powder reuse on the laser directed energy deposition process
2024
·
Jhonattan Gutjahr
, Milton Pereira
, et al.
·
Journal of Laser Applications
·
13
Wear resistance of a Metco 1030A hard coating deposited on Hadfield steel by laser cladding for ore comminution application
2021
·
Moisés Felipe Teixeira
, Jeferson T. Pacheco
, et al.
·
The International Journal of Advanced Manufacturing Technology
·
13
Effect of dynamic wire feeding on deposition quality in laser cladding process
2020
·
Max Baranenko Rodrigues
, Rafael Gomes Nunes Silva
, et al.
·
Journal of Laser Applications
·
13
Show more works
View as search
Works count:
149
Citation count:
948
H-index:
18
I10-index:
30
Year
Topic
Type