Get started
Author

Akito NITTA

Observed names: A Nitta, A. NITTA, A. Nitta, Akito Nitta, Nitta A
ORCID: 0000-0003-1028-1937
Observed ORCID: 0000-0003-1028-1937
OpenAlex ID: A5012317822
Fracture Mechanisms and Life Assessment Under High‐strain Biaxial Cyclic Loading of Type 304 Stainless Steel
1989 · Akito Nitta, Takashi Ogata, et al. · Fatigue & Fracture of Engineering Materials & Structures · 86
Thermal-mechanical Low-cycle Fatigue Under Creep-fatigue Interaction on Type 304 Stainless Steels
1979 · K. KUWABARA, A. NITTA · Fatigue & Fracture of Engineering Materials & Structures · 41
The Effect of Axial-Torsional Straining Phase on Elevated-Temperature Biaxial Low-Cycle Fatigue Life in SUS 304 Stainless Steel
1987 · Akito NITTA, Takashi OGATA, et al. · Journal of the Society of Materials Science Japan · 31
PDF
High-Temperature Low Cycle Fatigue Crack Propagation and Life Laws of Smooth Specimens Derived from the Crack Propagation Laws
1988 · Ohtani R, Kitamura T, et al. · 25
Evaluation of Multiaxial Low-Cycle Fatigue Failure Based on New Criterion and its Application to High Temperature Structural Design
1993 · Takashi OGATA, Akito NITTA · Journal of the Society of Materials Science Japan · 16
PDF
Propagation Behavior of Small Cracks in 304 Stainless Steel Under Biaxial Low-Cycle Fatigue at Elevated Temperature
1993 · T Ogata, A Nitta, et al. · 14
PDF
Development of small bulge fatigue testing technique using small disk‐type specimen
2019 · Shin‐ichi Komazaki, Ryuichiro Jojima, et al. · Fatigue & Fracture of Engineering Materials & Structures · 13
PDF
I : Thermo-Mechanical Fatigue in Advanced Materials for Next Generation High-Temperature Components
2007 · Akito NITTA · Journal of the Society of Materials Science Japan · 11
PDF
Thermal-mechanical Low-cycle Fatigue Under Creep-fatigue Interaction on Type 304 Stainless Steel
1980 · K. Kuwabara, A. Nitta · Elsevier eBooks · 11
Continuous Observation of Cavity Growth and Coalescence by Creep-Fatigue Tests in SEM
1996 · Masayuki ARAI, Takashi OGATA, et al. · JSME International Journal Series A · 10
PDF
Evaluation of Crack Initiation and Propagation Lives from Internal Defects and Lower Limit of Failure Life in High Temperature Fatigue on Ni-Based Single Crystal Superalloy
2001 · Masato YAMAMOTO, Akito NITTA, et al. · Journal of the Society of Materials Science Japan · 9
PDF
Crack Propagation in Creep: Experimental Results on Crack Propagation Rate
1976 · Ryuichi OHTANI, Akito NITTA · Journal of the Society of Materials Science Japan · 8
PDF
Proposal of Creep-Fatigue Life Evaluation Method for Ferritic Alloy Steels.
1994 · Takashi Ogata, Akito Nitta · TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A · 6
PDF
Development of Ultra-Miniature Creep Testing Method
2022 · Kazukiyo TAKAHASHI, Chiaki HISAKA, et al. · Journal of the Society of Materials Science Japan · 5
PDF
Crack Initiation at Notches in Creep
1976 · Ryuichi OHTANI, Akito NITTA, et al. · Journal of the Society of Materials Science Japan · 5
PDF
Practical application of an ultra-miniature creep test to the remaining creep-rupture life prediction using an iso–stress approach for in-service boiler piping of modified 9Cr-1Mo steel
2023 · Hirohide Nakatsuka, Chiaki Hisaka, et al. · Materials at High Temperatures · 4
Application of SBF Test to Fatigue Damage Assessment of Type 316 Steel
2022 · Shin-ichi Komazaki, Kosuke Egami, et al. · Materials Performance and Characterization · 4
Optimization and Verification of Ultra-Miniature Specimen for Evaluating Creep Property of In-Service Component Material under Uniaxial Loading
2022 · M. Tsurui, C. Hisaka, et al. · Materials Performance and Characterization · 4
Materials Science Toward “Super-” and “Ultra-” High Temperature Technologies: I: Expectation of New Materials to Ultra-High Temperature Gas Turbines in the Next Generation
2002 · Akito NITTA · Journal of the Society of Materials Science Japan · 4
PDF
Gas Turbine and Ultra-High Temperature Materials : Toward Future Advances over 1500℃
1996 · Akito NITTA · Nihon Kikai Gakkaishi/Journal of the Japan Society of Mechanical Engineers · 4
Continuous Observation of Cavity Growth and Coalescence by Creep-Fatigue Tests in SEM.
1995 · Masayuki Arai, Takashi Ogata, et al. · TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A · 4
PDF
Proposal of Life Prediction Method Based on Long-Term Creep-Fatigue Test Results of 304 Stainless Steel
1992 · Takashi OGATA, Akito NITTA · Journal of the Society of Materials Science Japan · 4
PDF
Fracture Modes and Fatigue Life Evaluation of SUS304 Stainless Steel under Non-Proportional Biaxial Loading Conditions at 550°C
1989 · Akito NITTA, Takashi OGATA, et al. · Journal of the Society of Materials Science Japan · 4
PDF
IGTC-99 THE CHARACTERISTICS OF THERMAL-MECHANICAL FATIGUE STRENGTH IN SUPERALLOYS FOR GAS TURBINE(Session C-5 Material and Manufacturing II)
1984 · Akito NITTA, K. Kuwabara, et al. · The International Gas Turbine Congress : book of abstracts · 4
Effect of Elongated Grain on High-Temperature Fatigue Crack Propagation Property of Ni-Based Superalloy
2005 · Masato YAMAMOTO, Akito NITTA, et al. · Journal of the Society of Materials Science Japan · 3
PDF
Works count: 100
Citation count: 390
H-index: 10
I10-index: 10
Year
Topic
Type