Get started
Author

M. Hüsnü Dirikolu

Observed names: Dirikolu M.H., Dirikolu, M. Hüsnü, DİRİKOLU, M. HÜSNÜ, DİRİKOLU, M. Hüsnü, Hüsnü Dirikolu, M Hüsnü Dirikolu, M. H. Díríkolu, M. Husnu Dirikolu, M. Hüsnü DİRİKOLU, M.H Dirikolu, M.H. Dirikolu, M.Husnu Dirikolu, M.Husnu Dırıkolu, M.Hüsnü Dirikolu
ORCID: 0000-0001-6279-2283
Observed ORCID: 0000-0001-6279-2283
OpenAlex ID: A5013352343
The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength
2003 · Alaattin Aktas, M.Husnu Dirikolu · Composite Structures · 95
Computer aided modelling of flexible forming process
2004 · M.Husnu Dirikolu, Esra Akdemir · Journal of Materials Processing Technology · 94
Finite element simulation of chip flow in metal machining
2001 · M.H Dirikolu, T.H.C Childs, et al. · International Journal of Mechanical Sciences · 85
Statistical Analysis of Fracture Strength of Composite Materials Using Weibull Distribution
2002 · M. Hüsnü Dirikolu, Alaattin Aktaş · DergiPark (Istanbul University) · 62
A thermochemical approach for the determination of convection heat transfer coefficients in a gun barrel
2011 · Ercan Değirmenci, M. Hüsnü Dirikolu · Applied Thermal Engineering · 55
An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates
2004 · Alaattin Aktas, M. Husnu Dirikolu · Composites Science and Technology · 52
Thermo-mechanical analysis of double base propellant combustion in a barrel
2016 · Ercan Değirmenci, Celal Evci, et al. · Applied Thermal Engineering · 48
Parameters optimization for horizontally built circular profiles: Numerical and experimental investigation
2018 · H.M. Khan, M.H. Dirikolu, et al. · Optik · 39
Numerical investigation of heat current study across different platforms in SLM processed multi-layer AlSi10Mg
2018 · H.M. Khan, M.H. Dirikolu, et al. · Optik · 30
An elasto-viscoplastic analysis of direct extrusion of a double base solid propellant
2010 · Baris Kalaycioglu, M. Husnu Dirikolu, et al. · Advances in Engineering Software · 28
An investigation of the effects of shear on the deflection of an orthotropic cantilever beam by the use of anisotropic elasticity theory
2001 · Osman Kılıc, Alaattin Aktas, et al. · Composites Science and Technology · 22
Analytical and finite element comparisons of stress intensity factors of composite materials
2000 · M Hüsnü Dirikolu, Alaattin Aktaş · Composite Structures · 21
A computer simulation for estimating lower bound fracture strength of composites using Weibull distribution
2004 · Burak Birgoren, M. Husnu Dirikolu · Composites Part B Engineering · 20
Factors Influencing the Machinability during Turning Sinter-Hardened Cu-Ni-Mo Based Steel: Dependency on Cutting Speed, Feed Rate, and Cutting Depth
2020 · N. Beköz Ullen, S.M.A. Hasak, et al. · Journal of Engineering Research · 18
PDF
Investigation of the design of a metal-lined fully wrapped composite vessel under high internal pressure
2010 · Barış Kalaycıoğlu, M. Husnu Dirikolu · High Pressure Research · 10
The Effect of Crack Geometry on the Nondestructive Fault Detection in a Composite Beam
2016 · Sadettin Orhan, Murat Lüy, et al. · The International Journal of Acoustics and Vibration · 8
PDF
Over-The-Top Knot Placement Technique Enhances Tensile Stability of Tendon Repairs
2010 · Mehmet Türker, Özgür Çetik, et al. · Foot & Ankle International · 5
Modelling Requirements for Computer Simulation of Metal Machining
2000 · M. Hüsnü Dirikolu · Kırıkkale University Institutional Repository · 4
Characterisation of mechanical and thermal properties of double base propellant
2010 · M. H. Díríkolu, B. Kalaycioğlu · Materials Research Innovations · 1
Dikişsiz Metal Astarlı ve Kompozit Sargılı Yüksek Basınç Tankı Tasarımı
2009 · Barış Kalaycioğlu, M. Hüsnü Dirikolu · AYBU AVESIS · 1
An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools
2026 · M. Hüsnü Dirikolu, Şakir Altınsoy · Coatings
Investigation of the Machinability of Peek, Pp and Ptfe High Performance Engineering Thermoplastics Following Heat Treatment
2025 · Muhammet Faruk Toprak, Şakir Altınsoy, et al. · Konya Journal of Engineering Sciences
PDF
Investigation of The Machinability of PEEK, PP and PTFE High Performance Engineering Thermoplastics Following Heat Treatment
2025 · DİRİKOLU, M. HÜSNÜ, BEKÖZ ÜLLEN, NURAY, et al. · İstanbul Yeni Yüzyıl Üniversitesi Research Information System
Silis Kumu Katmanlı Kompozit Basınçlı Su Borularının Kataner Direği Olarak Kullanılabilirliğinin İncelenmesi
2024 · ARDA, Cihat, YILMAZ, Şevval, et al. · International Journal of Advanced Natural Sciences and Engineering Researches
PDF
3U ve 12U küp uyduların fırlatma ve uzay koşullarındaki yapısal davranışlarının incelenmesi
2024 · Ahmet Özdemir, Şakir Altınsoy, et al. · DÜMF Mühendislik Dergisi
PDF
Works count: 37
Citation count: 698
H-index: 14
I10-index: 15
Year
Topic
Type