Get started
Author

Ernesto Urionabarrenetxea

Observed names: E. Urionabarrenetxea, Urionabarrenetxea, Ernesto
ORCID: 0000-0002-0444-0949
Observed ORCID: 0000-0002-0444-0949
OpenAlex ID: A5013658820
Experimental study of the influence of operational and geometric variables on the powders produced by close-coupled gas atomisation
2020 · Ernesto Urionabarrenetxea, Alejo Avello, et al. · Materials & Design · 68
PDF
Simulation and validation of the gas flow in close-coupled gas atomisation process: Influence of the inlet gas pressure and the throat width of the supersonic gas nozzle
2022 · Ernesto Urionabarrenetxea, José Manuel Martín, et al. · Powder Technology · 41
Study of deposition parameters and growth kinetics of ZnO deposited by aerosol assisted chemical vapor deposition
2021 · Sergio Sánchez-Martín, S. M. Olaizola, et al. · RSC Advances · 39
PDF
Designing for Shape Memory in Additive Manufacturing of Cu–Al–Ni Shape Memory Alloy Processed by Laser Powder Bed Fusion
2022 · Mikel Pérez-Cerrato, Itziar Fraile, et al. · Materials · 33
PDF
On the feasibility to obtain CuCrZr alloys with outstanding thermal and mechanical properties by additive manufacturing
2024 · F. Canillas, E. Leon-Gutierrez, et al. · Journal of Nuclear Materials · 18
Multiphase model to predict particle size distributions in close-coupled gas atomization
2022 · Aitor Amatriain, Ernesto Urionabarrenetxea, et al. · International Journal of Multiphase Flow · 17
Additive Manufacturing of Fe-Mn-Si-Based Shape Memory Alloys: State of the Art, Challenges and Opportunities
2023 · Lucia Del-Río, Maria L. Nó, et al. · Materials · 14
Powder Metallurgy Processing to Enhance Superelasticity and Shape Memory in Polycrystalline Cu–Al–Ni Alloys: Reference Material for Additive Manufacturing
2024 · Mikel Pérez-Cerrato, Jose F. Gómez-Cortés, et al. · Materials · 6
PDF
Reproducibility and repeatability of size distribution and morphology characterization techniques in gas-atomized powders
2026 · Marta Ostolaza, Manuel Sánchez-Poncela, et al. · Powder Technology · 5
Optimising the laser powder bed fusion processing parameters of Cu-Al-Ni shape memory alloys: microstructure and functional properties relationship
2025 · Mikel Pérez-Cerrato, José F. Gómez-Cortés, et al. · Virtual and Physical Prototyping · 3
Evaluation of mechanical and magnetic properties of laser-DED Fe–Si alloy: element segregation and low-frequency AC performance
2026 · Ángel Sota Muñoz, Nerea Burgos, et al. · Journal of Materials Research and Technology · 2
Powder Bed Fusion Laser Beam (PBF-LB) Of GRCop42. Processability And Influence Of Post-build Heat Treatments On The Microstructure And Thermal And Mechanical Properties
2025 · Ceit-BRTA, Adrian Barbosa, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM) · 1
Minimization of Porosity in E11018‐G Low‐Alloyed Steel Processed by Laser Powder Directed Energy Deposition
2025 · Josu López‐López, Florencia Schiopetto, et al. · steel research international · 1
Short-Loop Recycling Of Nd-Fe-B Scrap By Gas Atomization
2023 · G. Sarriegui, E. Urionabarrenetxea, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM) · 1
Application Of A Multi-phase Numerical Simulation Procedure To The Design Of Critical Components In Atomization Units
2026 · CEIT-BRTA, Enrique Manuel Huerta, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM)
Sinter-based Additive Manufacturing Of Nitronic® 50 High-Nitrogen Stainless Steel
2026 · CEIT, Shandra Sainz, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM)
Development of Advanced Manufacturing Technologies for the Production of Large Components to Enhance the Competitiveness of the Spanish Industrial Sector in Nuclear Fusion Energy
2026 · Edgar Leon-Gutierrez, M. Roldan, et al. · Journal of Nuclear Engineering
From Laboratory To Industrial-scale Gas Atomization Process: Experimental Results, Numerical Modelling And Lessons Learned In The Pursuit Of Higher Productivity
2025 · CEIT-BRTA, Ernesto Urionabarrenetxea, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM)
CFD Efficient Simulations To Predict Particle Size Distributions Of Gas-Atomized Pow-ders Of Different Materials Obtained With Different Gases
2024 · Alejo Avello, Ernesto Urionabarrenetxea, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM)
Advances in Powder Bed Fusion Electron Beam (PBF-EB) of CuCrZr: Achieving Optimal Microstructure and Mechanical and Thermal Performance
2024 · Francisco Canillas, Nerea Ordas, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM)
Additive Manufacturing of Cu-Al-Ni Shape Memory Alloys through Laser Powder Bed Fusion and Laser Metal Deposition: Challenges and Perspectives
2024 · Jose M. San Juan, Mikel Pérez-Cerrato, et al. · Conference proceedings from the International Conference on Shape Memory and Superelastic Technologies
Porosity Study and Process Parameter Optimization in Low Alloyed Steel Manufactured by Laser Powder Directed Energy Deposition
2024 · Josu López-López, F. Schiopetto, et al. · SSRN Electronic Journal
Advances In The Numerical Modelling Of The Close-Coupled Gas Atomisation Process: Optimal Coupling Between Primary And Secondary Atomisation Stages
2023 · Ernesto Urionabarrenetxea, Alejo Avello, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM)
Development Of Nickel Aluminium Bronzes By Powder Metallurgy For Marine Applications
2023 · Aintzane Fayanás, Nerea Ordás, et al. · European Powder Metallurgy Congress and Exhibition (Euro PM)
Efficient Modeling Of Primary And Secondary Atomisation In Close-coupled Gas Atomisers
2022 · Aitor Amatriain, Ernesto Urionabarrenetxea, et al. · World Powder Metallurgy Congress & Exhibition (World PM)
Works count: 27
Citation count: 249
H-index: 7
I10-index: 7
Year
Topic
Type