Get started
Author

Abdolvahed Kami

Observed names: A Kami, A. Kami, Kami, Abdolvahed
Institution: Semnan University
ORCID: 0000-0003-2148-3366
Observed ORCID: 0000-0003-2148-3366
OpenAlex ID: A5013676021
Metal FDM, a new extrusion-based additive manufacturing technology for manufacturing of metallic parts: a review
2022 · Haidar Ramazani, Abdolvahed Kami · Progress in Additive Manufacturing · 169
Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model
2014 · Abdolvahed Kami, Bijan Mollaei Dariani, et al. · Journal of Materials Processing Technology · 137
3D printing of continuous fiber reinforced composites: A review of the processing, pre- and post-processing effects on mechanical properties
2022 · Faraz Safari, Abdolvahed Kami, et al. · Polymers and Polymer Composites · 88
Developments of the Marciniak-Kuczynski model for sheet metal formability: A review
2019 · Dorel Banabic, Abdolvahed Kami, et al. · Journal of Materials Processing Technology · 65
Fatigue testing on rotary friction-welded joints between solid ABS and 3D-printed PLA and ABS
2022 · Abbasali Bagheri, Mohammad Sadegh Aghareb Parast, et al. · European Journal of Mechanics - A/Solids · 38
Bending fatigue behavior of fused filament fabrication 3D-printed ABS and PLA joints with rotary friction welding
2022 · Mohammad Sadegh Aghareb Parast, Abbasali Bagheri, et al. · Progress in Additive Manufacturing · 36
Prediction of wrinkling in thin-walled tube push-bending process using artificial neural network and finite element method
2011 · A Kami, B M Dariani · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 29
Effects of fused filament fabrication (FFF) process parameters on tensile and flexural properties of ABS/PLA multi-material
2024 · Amir Khodaee, Vahid Abedini, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 19
Application of a Gtn Damage Model to Predict the Fracture of Metallic Sheets Subjected to Deep-drawing
2014 · Abdolvahed Kami, Bijan Mollaei Dariani, et al. · 15
Single point incremental forming of polyamide/30 wt% short glass fiber composite
2022 · Sareh Bagheri, Abdolvahed Kami, et al. · Journal of Thermoplastic Composite Materials · 13
Advanced Models for the Prediction of Forming Limit Curves
2016 · Dorel Banabic, Dan-Sorin Comsa, et al. · ESAFORM bookseries on material forming · 10
Effects of raster angle and composition of layers on tensile and flexural properties of PLA-PLA/Al multimaterial manufactured by fused deposition modeling
2023 · Ali Safari Mazaheri, Vahid Abedini, et al. · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · 7
PDF
Modeling and optimization of equivalent plastic strain in equal-channel angular rolling using response surface methodology
2014 · Reza Nemati Chari, Abdolvahed Kami, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 7
Spin welding of 3D-printed and solid acrylonitrile–butadiene–styrene (ABS) components: a preliminary investigation
2022 · Abbasali Bagheri, Vahid Asghari, et al. · Archives of Civil and Mechanical Engineering · 6
An Investigation on Three-Point Bending of Foam-Filled Double Tubes and Parameter Optimization Using Response Surface Methodology
2021 · Abdolvahed Kami, Javad Shahbazi Karami · DOAJ (DOAJ: Directory of Open Access Journals) · 5
Applications of the Gurson’s model in sheet metal forming
2018 · Dorel Banabic, Abdolvahed Kami · MATEC Web of Conferences · 5
PDF
Synergistic effects of nano-clay and carbon nanotubes on the microstructure and hardness of aluminum composites fabricated via powder metallurgy
2025 · Reza Jaraemi, Abdolvahed Kami · Advanced Composite Materials · 4
Numerical study on the influence of process parameters in direct ink writing of high viscosity bio-inks
2022 · Fatemeh Loghman, Abdolvahed Kami, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 4
Influence of Raster Angle and Post-Processing Via Hot Pressing on the Mechanical Performance of Fused Filament Fabricated Polylactic Acid (PLA) Components
2025 · Ali Jadali, Vahid Abedini, et al. · International Journal on Interactive Design and Manufacturing (IJIDeM) · 2
An investigation on the effect of nanoparticle reinforcement and weld surface shape on bending behavior of rotary friction-welded high-density polyethylene
2021 · Vahid Asghari, Abdolvahed Kami, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 2
Experimental formability analysis of bondal sandwich sheet
2018 · Abdolvahed Kami, Dorel Banabic · AIP conference proceedings · 2
Printability and mechanical performance of fused deposition modeling-printed composites reinforced with coconut shell powder
2026 · Farzad Halalat, Vahid Abedini, et al. · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · 1
Extrusion-based additive manufacturing of SS316L/CNT nanocomposites: evaluation of feedstock properties and 3D-printing feasibility
2025 · Haidar Ramazani, Abdolvahed Kami, et al. · Progress in Additive Manufacturing · 1
Investigation of the influence of resin coating and heat treatment on the mechanical properties of topology-optimized parts made of polylactic acid (PLA) by the fused filament fabrication (FFF)
2026 · Ali Jadali, Vahid Abedini, et al. · Progress in Additive Manufacturing
PDF
Wear behavior of aluminum/MWCNT/nanoclay hybrid composites fabricated by powder metallurgy
2026 · Reza Jaraemi, Abdolvahed Kami · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
Works count: 40
Citation count: 674
H-index: 10
I10-index: 11
Year
Topic
Type