Get started
Author

Ated Ben Khalifa

Observed names: A. Ben Khalifa, Ated Ben KhalifA, Ated Ben Khlifa, Ated BenKhalifa, Ated Benkhalifa, Ated ben Khalifa, Ben Khalifa, A., Ben Khalifa, Ated
ORCID: 0000-0002-7716-6653
Observed ORCID: 0000-0002-7716-6653
OpenAlex ID: A5014601438
Mechanical characterization of glass/vinylester ±55° filament wound pipes by acoustic emission under axial monotonic loading
2012 · Ated Ben Khalifa, Mondher Zidi, et al. · Comptes Rendus Mécanique · 37
PDF
Experimental and numerical study of adhesively bonded ±55° filament wound tubular specimens under uniaxial tensile loading
2017 · Sonia Braiek, Redouane Zitoune, et al. · Composite Structures · 23
Modeling and multi-objective optimization of abrasive water jet machining process of composite laminates using a hybrid approach based on neural networks and metaheuristic algorithm
2023 · Faten Chaouch, Ated Ben Khalifa, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 20
Drilling of filament wound hybrid composite tubes: An experimental study
2023 · Sonia Braiek, Redouane Zitoune, et al. · Composite Structures · 12
Experimental investigation of joints strength obtained by ultrasonic welding and soldering under pure T-peel tests using DIC
2022 · Ated Ben Khalifa, Sonia Braiek, et al. · Welding in the World · 10
Experimental and numerical investigation of adhesively bonded ±55° filament wound tubular specimens under internal pressure
2018 · Sonia Braiek, Ated Ben Khalifa, et al. · Engineering Fracture Mechanics · 8
Fire behaviour of hybrid filament-wound single and adhesively bonded composites tubes under static pressure
2020 · Sonia Braiek, Ated Ben Khalifa, et al. · Polymer Testing · 7
Experimental optimization of cutting conditions to improve surface roughness of aeronautic parts made of Fe-Ni alloys
2023 · Ahmed Seifallah Frih, Ezzeddine Ftoutou, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 5
Experimental investigation of three-point bending behavior of assembled hybrid composite tubes before and after the fire endurance test
2022 · Ated Ben Khalifa, Nessrine Brahem, et al. · Journal of Composite Materials · 5
Experimental investigation of the influence of process parameters on the mechanical properties of maraging steel produced by electron beam melting
2024 · Ameni Chaabene, Slim Ben-Elechi, et al. · The International Journal of Advanced Manufacturing Technology · 4
Experimental investigation of single and butt-welded GFRP filament winding tubes bending behavior based on conventional and Digital Image Correlation method
2023 · Nessrine Brahem, Ated Ben Khalifa, et al. · Thin-Walled Structures · 4
Optimization of Wire Arc Additive Manufacturing Based Cold Metal Transfer arc length and dynamic correction parameters using geometrical and Digital Image Corelation analysis
2024 · Mounir Rabhi, Ated Ben Khalifa, et al. · Matériaux & Techniques · 3
Comparative study of milling for SS316L parts: WAAM-CMT versus rolled processes through vibration signal and surface roughness analysis
2026 · Imed Hajjaji, Ezzeddine Ftoutou, et al. · Journal of Mechanical Science and Technology · 2
Multi-objective optimization of fused deposition modeling process parameters using Taguchi-based grey relational analysis, and particle swarm optimization for PLA parts
2026 · Khaled Boulahem, Seddik Shiri, et al. · Matériaux & Techniques · 2
Experimental investigations of tooth pitch variation and cutting parameters on areal surface texture in flat end milling of Fe–Ni alloy Supra50
2025 · Mihed Ben Said, Ezzeddine Ftoutou, et al. · The International Journal of Advanced Manufacturing Technology · 2
Experimental investigations on Wall Geometry and Waviness
2025 · Imed Hajjaji, Ated Ben Khalifa, et al. · MATEC Web of Conferences · 2
PDF
Experimental investigation of tool feed rate and machining strategy on surface roughness in flat end milling of Nickel-Iron alloy Supra50
2024 · Ezzeddine Ftoutou, Mihed Ben Said, et al. · Matériaux & Techniques · 2
Global Approach for Optimization and Control of CMT-Based WAAM for SS316L
2024 · Oussama Trad, Ated Ben Khalifa, et al. · Lecture notes in mechanical engineering · 2
Experimental Study of the LSC-GMAW Welding Process Using 304 L Stainless Steel
2024 · Ali Chetoui, Ated Ben Khalifa, et al. · Lecture notes in mechanical engineering · 2
Parameters Effect Study on Bead Geometry Deposited by CMT Technology Based Wire Additive Manufacturing (WAAM) Process
2023 · Oussama Trad, Ated Ben Khalifa, et al. · Lecture notes in mechanical engineering · 2
Characterization of the Surface Roughness of a GFRP by a 3D Profilometer After Trimming
2020 · Meher Azouzi, Ated Ben Khalifa, et al. · Lecture notes in mechanical engineering · 2
PDF
Fracture energy and failure analysis of laminated and adhesively bonded GFRP assemblies based on experimental investigation by DCB and ENF tests
2025 · Imen Debbabi, Ated Ben Khalifa, et al. · Journal of Composite Materials · 1
Multi-objective optimization of WAAM-CMT parameters: a comparative study of RSM and NSGA-II algorithm for bead geometry control
2025 · Oussama Trad, Ated Ben Khalifa, et al. · Matériaux & Techniques · 1
Numerical Simulation of Microcellular Injection Molding: A Case Study
2024 · A. Chaabene, A. Ben Khalifa, et al. · Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology · 1
PDF
Experimental Investigation of Cutting Parameters Influence on Surface Integrity Response During Trimming Operation of Hybrid Composite CGFRP
2024 · Sirine Stambouli, Lamis Allegue, et al. · Lecture notes in mechanical engineering · 1
Works count: 60
Citation count: 163
H-index: 7
I10-index: 5
Year
Topic
Type