Get started
Author

Salim Belhadi

Observed names: BELHADI, S, Belhadi Salim, Belhadi, Salim, S Belhadi, S. Belhadi, SALIM BELHADI, Salim BELHADI
ORCID: 0000-0002-7277-1600
Observed ORCID: 0000-0002-7277-1600
OpenAlex ID: A5015352291
Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI 420 in turning operations
2018 · Abderrahmen Zerti, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 114
Surface roughness and cutting forces modeling for optimization of machining condition in finish hard turning of AISI 52100 steel
2012 · Mohamed Walid Azizi, Salim Belhadi, et al. · Journal of Mechanical Science and Technology · 101
Investigation, modeling, and optimization of cutting parameters in turning of gray cast iron using coated and uncoated silicon nitride ceramic tools. Based on ANN, RSM, and GA optimization
2018 · Aissa Laouissi, M. A. Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 93
Investigation of the performance of the MQL, dry, and wet turning by response surface methodology (RSM) and artificial neural network (ANN)
2017 · Mourad Nouioua, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 89
Analysis and optimization of hard turning operation using cubic boron nitride tool
2014 · Khaider Bouacha, Mohamed Athmane Yallese, et al. · International Journal of Refractory Metals and Hard Materials · 89
Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steel
2021 · Youssef Touggui, Alper Uysal, et al. · The International Journal of Advanced Manufacturing Technology · 77
PDF
Some insights on the modelling of chip formation and its morphology during metal cutting operations
2016 · Tarek Mabrouki, Cédric Courbon, et al. · Comptes Rendus Mécanique · 76
PDF
Experimental and numerical study of chip formation during straight turning of hardened AISI 4340 steel
2005 · S Belhadi, T Mabrouki, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 69
Simultaneous optimization of surface roughness and material removal rate for turning of X20Cr13 stainless steel
2014 · Lakhdar Bouzid, Smail Boutabba, et al. · The International Journal of Advanced Manufacturing Technology · 63
Modeling and optimization of the turning parameters of cobalt alloy (Stellite 6) based on RSM and desirability function
2018 · Riadh Saidi, Brahim Ben Fathallah, et al. · The International Journal of Advanced Manufacturing Technology · 50
Cutting Conditions Modeling and Optimization in Hard Turning Using RSM, ANN and Desirability Function
2018 · Abderrezak Labidi, Hamid Tebassi, et al. · Journal of Failure Analysis and Prevention · 45
Comparative assessment of cooling conditions, including MQL technology on machining factors in an environmentally friendly approach
2017 · Mourad Nouioua, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 39
Modeling and optimization in turning of PA66-GF30% and PA66 using multi-criteria decision-making (PSI, MABAC, and MAIRCA) methods: a comparative study
2022 · Sabrina Haoues, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 34
PDF
Tool vibration, surface roughness, cutting power, and productivity assessment using RSM and GRA approach during machining of Inconel 718 with PVD-coated carbide tool
2022 · Ilyas Kouahla, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 34
Tool wear, 3D surface topography, and comparative analysis of GRA, MOORA, DEAR, and WASPAS optimization techniques in turning of cold work tool steel
2022 · Khaoula Safi, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 28
Multi-objective optimization of surface roughness, cutting forces, productivity and Power consumption when turning of Inconel 718
2015 · Hamid Tebassi, Mohamed Athmane Yallese, et al. · International Journal of Industrial Engineering Computations · 28
PDF
Simultaneous improvement of surface quality and productivity using grey relational analysis based Taguchi design for turning couple (AISI D3 steel/ mixed ceramic tool (Al2O3 + TiC))
2017 · Oussama Zerti, Mohamed Athmane Yallese, et al. · International Journal of Industrial Engineering Computations · 24
PDF
Modelling and optimization of machining parameters during hardened steel AISID3 turning using RSM, ANN and DFA techniques: Comparative study
2020 · Bouzid Lakhdar, Yallese Mohamed Athmane, et al. · JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES · 23
Multi-objective optimization of turning parameters for targeting surface roughness and maximizing material removal rate in dry turning of AISI 316L with PVD-coated cermet insert
2020 · Youssef Touggui, Salim Belhadi, et al. · SN Applied Sciences · 21
PDF
Wear behaviour of CBN tool when turning hardened AISI D3 steel
2007 · H. Bouchelaghem, M. A. Yallese, et al. · Mechanika · 21
PDF
Multi-response optimization using artificial neural network-based GWO algorithm for high machining performance with minimum quantity lubrication
2021 · Mourad Nouioua, Aissa Laouissi, et al. · The International Journal of Advanced Manufacturing Technology · 20
Effects of rolling ball tool parameters on roughness, sheet thinning, and forming force generated during SPIF process
2020 · Lassaad Kilani, Tarek Mabrouki, et al. · The International Journal of Advanced Manufacturing Technology · 20
Machining Optimization of HDPE Pipe Using the Taguchi Method and Grey Relational Analysis
2016 · S. Belhadi, M. Kaddeche, et al. · International Polymer Processing · 20
Optimization of surface roughness, tool wear and material removal rate in turning of Inconel 718 with ceramic composite tools using MCDM methods based on Taguchi methodology
2022 · H Boumaza, S Belhadi, et al. · Sadhana · 19
A comparative study on performance of cermet and coated carbide inserts in straight turning AISI 316L austenitic stainless steel
2020 · Youssef Touggui, Salim Belhadi, et al. · The International Journal of Advanced Manufacturing Technology · 18
Works count: 85
Citation count: 1,494
H-index: 20
I10-index: 35
Year
Topic
Type