Get started
Author

Hasan Ulus

Observed names: HASAN ULUS, Hasan ULUS, ULUS, HASAN, Ulus, Hasan
ORCID: 0000-0001-8591-8993
Observed ORCID: 0000-0001-8591-8993
OpenAlex ID: A5016494712
Static and dynamic mechanical responses of CaCO3 nanoparticle modified epoxy/carbon fiber nanocomposites
2017 · Volkan Eskizeybek, Hasan Ulus, et al. · Composites Part B Engineering · 104
Boron nitride-MWCNT/epoxy hybrid nanocomposites: Preparation and mechanical properties
2013 · Hasan Ulus, Tugay Üstün, et al. · Applied Surface Science · 104
Evaluating the influence of service conditions on the out-of-plane and in-plane loading performance and damage behavior of unidirectional CF/PEKK composites for aerospace applications
2025 · Ceren Yildirim, Hasan Ulus, et al. · Composites Part B Engineering · 99
Ameliorating tensile and fracture performance of carbon fiber-epoxy composites via atmospheric plasma activation: Insights into damage modes through in-situ acoustic emission inspection
2025 · Halil Senol, Hasan Ulus, et al. · Composites Part A Applied Science and Manufacturing · 92
Effects of alumina nanoparticles on dynamic impact responses of carbon fiber reinforced epoxy matrix nanocomposites
2018 · Halil B. Kaybal, Hasan Ulus, et al. · Engineering Science and Technology an International Journal · 85
PDF
Assessing fracture toughness performance of adhesively bonded carbon fiber/epoxy composite joints accompanied by acoustic emission inspection: Effect of surface treatment methods
2025 · Halil Senol, Hasan Ulus, et al. · Engineering Fracture Mechanics · 79
Assessing the fracture and dynamic mechanical performance of CF/PEKK joints bonded with epoxy-based adhesive film for aerospace applications: Impact of thermal and cycling hygrothermal conditions
2024 · Ceren Yildirim, Hasan Ulus, et al. · Composites Part A Applied Science and Manufacturing · 76
Low-velocity impact behavior of carbon fiber/epoxy multiscale hybrid nanocomposites reinforced with multiwalled carbon nanotubes and boron nitride nanoplates
2015 · Hasan Ulus, Tugay Üstün, et al. · Journal of Composite Materials · 75
Impact damage and low temperature effects on carbon fiber/epoxy joints: A comparative study of hybrid bolted/bonded and bolted configurations with cross-ply and angle-ply laminates
2024 · Mahsa Seyednourani, Sercan Akgun, et al. · Composites Part A Applied Science and Manufacturing · 74
Tailoring adherend surfaces for enhanced bonding in CF/PEKK composites: Comparative analysis of atmospheric plasma activation and conventional treatments
2024 · Ceren Yildirim, Hasan Ulus, et al. · Composites Part A Applied Science and Manufacturing · 73
Effect of atmospheric plasma treatment on Mode-I and Mode-II fracture toughness properties of adhesively bonded carbon fiber/PEKK composite joints
2023 · Ceren Yildirim, Hasan Ulus, et al. · Engineering Fracture Mechanics · 67
Enhanced Salty Water Durability of Halloysite Nanotube Reinforced Epoxy/Basalt Fiber Hybrid Composites
2019 · Hasan Ulus, Halil Burak Kaybal, et al. · Fibers and Polymers · 67
Coating graphene nanoplatelets onto carbon fabric with controlled thickness for improved mechanical performance and EMI shielding effectiveness of carbon/epoxy composites
2023 · Gökhan Mutlu, Ferhat Yıldırım, et al. · Engineering Fracture Mechanics · 64
Halloysite nanotube reinforcement endows ameliorated fracture resistance of seawater aged basalt/epoxy composites
2020 · Hasan Ulus, Halil Burak Kaybal, et al. · Journal of Composite Materials · 64
Out-of-plane static loading performance of lightweight aluminum/composite FML structures for retrofitting applications: Effectiveness of bonded, bolted and hybrid bonded/bolted joining techniques under hydrothermal aging environment
2023 · Hasan Ulus, Halil Burak Kaybal · Construction and Building Materials · 60
Comparative analysis of thermoplastic and thermoset adhesives performance and the influence on failure analysis in jointed elium ‐based composite structures
2023 · Halil Burak Kaybal, Hasan Ulus · Polymer Composites · 57
Experimental investigation on Compression-After-Impact (CAI) response of aerospace grade thermoset composites under low-temperature conditions assisted with acoustic emission monitoring
2023 · Mahsa Seyyednourani, Sercan Akgun, et al. · Composite Structures · 55
Analyzing stiffness variations in 3D woven composites: A multi-instrumental study on Glass/Kevlar hybridization effects under tensile and shear loads
2025 · Abdulrahman Al-Nadhari, Hasan Ulus, et al. · Composites Part A Applied Science and Manufacturing · 54
Effect of long‐term stress aging on aluminum‐BFRP hybrid adhesive joint's mechanical performance: Static and dynamic loading scenarios
2022 · Hasan Ulus, Halil Burak Kaybal, et al. · Polymer Composites · 53
Seawater Aged Basalt/Epoxy Composites: Improved Bearing Performance with Halloysite Nanotube Reinforcement
2021 · Halil Burak Kaybal, Hasan Ulus, et al. · Fibers and Polymers · 50
Flush-patch aluminum–FRP repair joints for construction and retrofitting: effects of laminate type, hybrid bonding and PAN nanofiber interleaves under pre-damage and hygrothermal ageing
2026 · Hasan Ulus, Halil Burak Kaybal, et al. · International Journal of Adhesion and Adhesives · 49
PDF
The effect of multiscale Kevlar/Glass hybridization on the mechanical properties and the damage evolution of 3D orthogonal woven composites under flexural and impact loadings
2023 · Abdulrahman Al-Nadhari, Halil Senol, et al. · Composites Part A Applied Science and Manufacturing · 49
Fracture and dynamic mechanical analysis of seawater aged aluminum-BFRP hybrid adhesive joints
2022 · Hasan Ulus, Halil Burak Kaybal, et al. · Engineering Fracture Mechanics · 49
Evaluating the effectiveness of nanofillers in filament wound carbon/epoxy multiscale composite pipes
2016 · Tugay Üstün, Hasan Ulus, et al. · Composites Part B Engineering · 48
Influence of stacking sequence and compaction force during the AFP process on mechanical performance and damage mechanisms elucidated by acoustic emission insights
2025 · Fetiye Esin Yakin, Cahit Orhun Senol, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 46
Works count: 77
Citation count: 2,324
H-index: 35
I10-index: 44
Year
Topic
Type