Author

Sayed Hassan Nourbakhsh

Observed names: H. Nourbakhsh, Hassan Nourbakhsh, S H Nourbakhsh, S. H. Nourbakhsh, S. Hassan Nourbakhsh, S.H. Nourbakhsh, Sayed Hassan Nourbaksh

Institution: Shahrekord University

Observed institutions: Islamic Azad University, Tehran, Shahrekord University, Bu-Ali Sina University

ORCID: 0000-0002-1747-0100

Observed ORCID: 0000-0002-1747-0100

OpenAlex ID: A5017403279

Effects of an overlapping multi-pass friction stir process and rapid cooling on the mechanical properties and microstructure of AZ31 magnesium alloy

2014 · A. Alavi Nia, H. Omidvar, et al. · Materials & Design (1980-2015) · 72

Evaluation of tensile strength of Al7075-SiC nanocomposite compacted by gas gun using spherical indentation test and neural networks

2016 · A. Atrian, G.H. Majzoobi, et al. · Advanced Powder Technology · 46

Microstructure and Mechanical Properties of AZ31/SiC and AZ31/CNT Composites Produced by Friction Stir Processing

2015 · A. Alavi Nia, S. H. Nourbakhsh · Transactions of the Indian Institute of Metals · 42

Investigation of the effects of thread pitch and water cooling action on the mechanical strength and microstructure of friction stir processed AZ31

2013 · A. Alavi Nia, H. Omidvar, et al. · Materials & Design (1980-2015) · 29

Microstructure and corrosion resistance of MAO coatings on AZ31 magnesium

2018 · A Keyvani, M Zamani, et al. · Materials Research Express · 27

Thermo-electromechanical behavior of functionally graded piezoelectric hollow cylinder under non-axisymmetric loads

2015 · A. Atrian, J. Jafari Fesharaki, et al. · Applied Mathematics and Mechanics · 20

An Alternative Approach to Determine Material Characteristics Using Spherical Indentation and Neural Networks for Bulk Metals

2012 · A. H. Mahmoudi, S. H. Nourbakhsh, et al. · Journal of Testing and Evaluation · 19

PDF

A Neural Networks approach to characterize material properties using the spherical indentation test

2011 · A.H. Mahmoudi, S.H. Nourbakhsh · Procedia Engineering · 19

PDF

Analytical solution for off-centered stagnation flow towards a rotating disc problem by homotopy analysis method with two auxiliary parameters

2010 · S.H. Nourbakhsh, A.A. Pasha Zanoosi, et al. · Communications in Nonlinear Science and Numerical Simulation · 19

A novel approach to calibrate the Drucker–Prager Cap model for Al7075 powder

2018 · A. Atrian, G. H. Majzoobi, et al. · Archive of Applied Mechanics · 18

Semi-exact solution for nonlinear dynamic analysis of graded carbon nanotube-reinforced beam with graded shape memory wires

2019 · Ahmad Fallah, Mohsen Botshekanan Dehkordi, et al. · Mechanics of Advanced Materials and Structures · 16

Investigation of mechanical and microstructural properties of AZ31/SiC nanocomposite fabricated by squeeze stir casting

2018 · S H Nourbakhsh, M A Shahrokhian, et al. · Materials Research Express · 16

PDF

Finite element implementation of coupled temperature-rate dependent fracture using the phase field model

2020 · S. Masoud Marandi, S. Hassan Nourbakhsh, et al. · Mechanics of Materials · 15

Investigations of mechanical, microstructural and tribological properties of Al2024 nanocomposite reinforced by TiO2 nanoparticles

2018 · S H Nourbakhsh, M Tavakoli, et al. · Materials Research Express · 13

Optimal active control of laminar flow over a circular cylinder using Taguchi and ANN

2017 · E. Khalili Dehkordi, M. Goodarzi, et al. · European Journal of Mechanics - B/Fluids · 13

Constrained functionally graded gyroid structure for tunable energy absorption

2025 · Mohammad Kashfi, Sayed Hassan Nourbakhsh, et al. · Materials & Design · 12

A Novel Method to Determine Material Properties and Residual Stresses Simultaneously Using Spherical Indentation

2014 · A. H. Mahmoudi, M. Ghanbari-Matloob, et al. · Journal of Testing and Evaluation · 12

Mechanical Behavior of Al-SiCnp Nanocomposite Fabricated by Hot Extrusion Technique

2018 · Amir Atrian, S.H. Nourbakhsh · DOAJ (DOAJ: Directory of Open Access Journals) · 9

Nonlinear Effects on Resonance Behaviour of Beams in Micro Scale

2011 · H. Nourbakhsh, R. Mohammadzadeh, et al. · Applied Mechanics and Materials · 8

Nonlinear dynamic analysis of microbeam containing graded shape memory microwires

2020 · Ahmad Fallah, Mohsen Botshekanan Dehkordi, et al. · Composite Structures · 7

Enhancement of the microstructure homogeneity and mechanical performance of the As-Cast Mg/Mg2Si in-situ composite through friction stir processing

2019 · Mehdi Raeissi, Sayed Hassan Nourbaksh · Materials Research Express · 7

Enhanced rheological performance of shear thickening fluids: effects of graphene oxide nanoplatelets and clay nanoparticles

2025 · Sajjad Astaraki, Hanieh Easavinejad, et al. · Colloid & Polymer Science · 6

Phase-field modeling of coupled anisotropic plasticity–ductile fracture in rate-dependent solids

2021 · S. Masoud Marandi, Hojjat Badnava, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 6

Mechanical, microstructural, and fatigue characteristics of hot consolidated Al-SiC nanocomposites

2018 · Amir Atrian, Sayed Hassan Nourbakhsh · Materials Research Express · 6

PDF

A stabilised Total Lagrangian Element-Free Galerkin method for transient nonlinear solid dynamics

2024 · Hojjat Badnava, Chun Hean Lee, et al. · Computational Mechanics · 5

Works count: 39

Citation count: 483

H-index: 13

I10-index: 17