Get started
Author

Hüseyin Selçuk Halkacı

Observed names: H. Selcuk Halkaci, H. Selçuk Halkaci, H. Selçuk Halkacı, H.S. Halkaci, H.S. Halkacı, HALKACI, HÜSEYİN SELÇUK, HALKACI, Hüseyin, Halkaci, Huseyin Selcuk, Halkacı, Hüseyin Selçuk, Huseyin S Halkaci, Huseyin S. Halkaci, Huseyin Selcuk Halkaci, Hüseyin S. Halkacı, Hüseyin Selçuk HALKACI, Hüseyin Selçuk Halkaci, S Halkaci, S. Halkaci, Selcuk Halkaci, Selcuk Halkaci, Huseyin, Selcuk Halkacı, Selçuk Halkacı
ORCID: 0000-0001-5739-4862
Observed ORCID: 0000-0001-5739-4862
OpenAlex ID: A5019473993
Experimental determination of the optimum performance of ejector refrigeration system depending on ejector area ratio
2008 · R. Yapıcı, H.K. Ersoy, et al. · International Journal of Refrigeration · 158
An experimental study for determination of the effects of machining parameters on surface roughness in electrical discharge machining (EDM)
2005 · Yusuf Keskin, H. Selçuk Halkacı, et al. · The International Journal of Advanced Manufacturing Technology · 129
Energetic and exergetic comparison of basic and ejector expander refrigeration systems operating under the same external conditions and cooling capacities
2014 · N. Bilir Sag, H.K. Ersoy, et al. · Energy Conversion and Management · 111
Effects of sheet thickness and anisotropy on forming limit curves of AA2024-T4
2012 · Murat Dilmec, H. Selcuk Halkaci, et al. · The International Journal of Advanced Manufacturing Technology · 68
Effects of sandblasting and electrical discharge machining on porcelain adherence to cast and machined commercially pure titanium
2006 · Özgür İnan, Aslı Acar, et al. · Journal of Biomedical Materials Research Part B Applied Biomaterials · 49
The Effect of Strain-Rate Sensitivity on Formability of AA 5754-O at Cold and Warm Temperatures
2010 · Fahrettin Ozturk, Hakan Pekel, et al. · Journal of Materials Engineering and Performance · 47
An artificial immune system approach to CNC tool path generation
2008 · Erkan Ülker, Mehmet Emin Turanalp, et al. · Journal of Intelligent Manufacturing · 41
Enhancing formability in hydromechanical deep drawing process adding a shallow drawbead to the blank holder
2014 · Huseyin Selcuk Halkaci, Mevlut Turkoz, et al. · Journal of Materials Processing Technology · 40
Numerical optimization of warm hydromechanical deep drawing process parameters and its experimental verification
2020 · Mevlüt Türköz, Ömer Necati Cora, et al. · Journal of Manufacturing Processes · 24
Determination of optimal loading profiles in hydromechanical deep drawing process using integrated adaptive finite element analysis and fuzzy control approach
2016 · Ekrem Öztürk, Mevlüt Türköz, et al. · The International Journal of Advanced Manufacturing Technology · 22
Detailed Investigation of Forming Limit Determination Standards for Aluminum Alloys
2013 · Murat Dilmec, H. Selcuk Halkaci, et al. · Journal of Testing and Evaluation · 22
Effects of airborne‐particle abrasion, sodium hydroxide anodization, and electrical discharge machining on porcelain adherence to cast commercially pure titanium
2006 · Aslı Acar, Özgür İnan, et al. · Journal of Biomedical Materials Research Part B Applied Biomaterials · 21
Evaluation of form error at semi-spherical tools by use of image processing
2007 · H.S. Halkacı, Ö. Mavi, et al. · Measurement · 20
Determination of optimal EDM machining parameters for machined pure titanium-porcelain adhesion
2009 · Asli Secilmis, A. Murat Olmez, et al. · The International Journal of Advanced Manufacturing Technology · 13
Warm Hydromechanical Deep Drawing of AA 5754-O and Optimization of Process Parameters
2017 · Doğan Acar, Mevlüt Türköz, et al. · Journal of Engineering Materials and Technology · 12
Microstructural Characterization of Improved Formability of Ti-6Al-4V Sheet by Pulsating Hydraulic Bulging at Room Temperature
2022 · Yusuf Furkan Yapan, Osman Öztürk, et al. · Journal of Materials Engineering and Performance · 10
The Effect of Temperature and Strain-Rate Sensitivity on Formability of AA 5754
2012 · Mevlut Turkoz, Selcuk Halkacı, et al. · Applied Mechanics and Materials · 10
Investigation on Earing Behavior of AA 2024-T4 and AA 5754-O Aluminum Alloys
2011 · Mevlut Turkoz, Murat Dilmec, et al. · Advanced materials research · 10
Investigation of the effect of hydromechanical deep drawing process parameters on formability of AA5754 sheets metals by using neuro-fuzzy forecasting approach
2015 · Mustafa Tinkir, Murat Dilmeç, et al. · Journal of Intelligent & Fuzzy Systems · 9
Investigation of Hydro-piercing Method for Stainless Steels by Finite Element Method
2018 · Habip Gökay Korkmaz, Serkan Toros, et al. · MATEC Web of Conferences · 8
PDF
Enhancing formability of Ti-6Al-4V cylindrical cups by pulsating hydroforming process: Experimental, numerical and microstructural investigations
2024 · Osman Öztürk, Mevlüt Aydın, et al. · Engineering Science and Technology an International Journal · 7
Formability improvement in Ti–6Al–4 V sheet at room temperature by pulsating hydraulic bulging: experimental and numerical investigations
2022 · Osman Öztürk, Habip G. Korkmaz, et al. · The International Journal of Advanced Manufacturing Technology · 7
An Application of the Bees Algorithm to Pulsating Hydroforming
2022 · Osman Öztürk, Muhammed Arif Şen, et al. · Springer series in advanced manufacturing · 7
Design, Fabrication, and Experimental Validation of a Warm Hydroforming Test System
2015 · Mevlüt Türköz, Hüseyin Selçuk Halkacı, et al. · Journal of Manufacturing Science and Engineering · 7
Comparison of Flow Curves of AA 5457-O Sheet Material Determined by Hydraulic Bulge and Tensile Tests at Warm Forming Temperatures
2016 · Emine Feyza Şükür, Mevlüt Türköz, et al. · Journal of Testing and Evaluation · 6
Works count: 61
Citation count: 892
H-index: 13
I10-index: 18
Year
Topic
Type