Get started
Author

Hai-Ping Tsui

Observed names: H.P. Tsui, Hai Ping Tsui
ORCID: 0000-0002-5297-2077
Observed ORCID: 0000-0002-5297-2077
OpenAlex ID: A5019598562
Improvement of Electrochemical Microdrilling Accuracy Using Helical Tool
2008 · Hai-Ping Tsui, Jung-Chou Hung, et al. · Materials and Manufacturing Processes · 61
Prediction and optimization of geometrical quality for pulsed laser cutting of non-oriented electrical steel sheet
2022 · Muhamad Nur Rohman, Jeng-Rong Ho, et al. · Optics & Laser Technology · 28
Electrode insulation layer for electrochemical machining fabricated through hot-dip aluminizing and microarc oxidation on a stainless-steel substrate
2019 · Jung-Chou Hung, Yi-Ren Liu, et al. · Surface and Coatings Technology · 25
An Investigation of Ultrasonic-Assisted Electrochemical Machining of Micro-Hole Array
2021 · Zhe-Yong Shen, Hai-Ping Tsui · Processes · 21
PDF
Fabrication of a Microtool in Electrophoretic Deposition for Electrochemical Microdrilling and in Situ Micropolishing
2011 · Hai-Ping Tsui, Jung-Chou Hung, et al. · Materials and Manufacturing Processes · 21
Process Simulation–Assisted Fabricating Micro-Herringbone Grooves for a Hydrodynamic Bearing in Electrochemical Micromachining
2011 · Dar-Yuan Chang, Ping-Chen Shen, et al. · Materials and Manufacturing Processes · 20
Measurement of Electrical Discharge Machining Oil Quality by Analyzing Variations in the Equivalent Relative Permittivity of the Capacitive Sensor
2020 · Shih-Jui Chen, Yi-Li Chen, et al. · Sensors · 14
PDF
A study on stainless steel mirror surface polishing by using the electrophoretic deposition method
2007 · Hai-Ping Tsui, Biing-Hwa Yan, et al. · International Journal of Machine Tools and Manufacture · 14
Characterization of machined surface in semi-conductive SiC wafer subjected to micro-EDM drilling
2024 · Hoang-Tien Cao, Jeng-Rong Ho, et al. · Materials Science in Semiconductor Processing · 13
Characteristics of the Polishing Effects for the Stainless Tubes in Magnetic Finishing with Gel Abrasive
2021 · Ken-Chuan Cheng, Kuan-Yu Chen, et al. · Processes · 12
PDF
Ultrasonic vibration-assisted electrical discharge machining on Fe-based metallic glass by adding conductive powder
2020 · Hai-Ping Tsui, Pei-Hao Lee, et al. · Procedia CIRP · 12
PDF
Study on Fe-Based Metallic Glass Micro Hole Machining by Using Micro-EDM Combined with Electrophoretic Deposition Polishing
2022 · Hai-Ping Tsui, Shih-Yu Hsu · Processes · 10
PDF
Ultrasonic Vibration-assisted Electrochemical Discharge Machining of Quartz Wafer Micro-Hole Arrays
2023 · Chun-Hao Yang, Tai-Ching Wang, et al. · Processes · 9
Study on ultrasonic-assisted WECDM of quartz wafer with continuous electrolyte flow
2021 · Chun-Hao Yang, Hai-Ping Tsui · The International Journal of Advanced Manufacturing Technology · 7
Using a nickel electroplating deposition for strengthening microelectrochemical machining electrode insulation
2021 · Jung-Chou Hung, Hai-Ping Tsui, et al. · Journal of Manufacturing Processes · 7
Optimizing Electrochemical Buffing Control Parameters for Surface Finishing of Ultrahigh Purity Components
2007 · H.P. Tsui, Biing Hua Yan, et al. · Advanced materials research · 6
Study on Ultrasonic Vibration in Gas and Optimization of a Novel Process of EDM
2013 · Yan Cherng Lin, Han Ming Chow, et al. · Advanced materials research · 4
Surface Roughening of Silicon Wafer Solar Cell by Using ECDM Method
2019 · Hai Ping Tsui, Kuang Hua Chang, et al. · Key engineering materials · 3
A study on quartz wafer slot polishing by using the ultrasonic-assisted wire electrophoretic deposition method
2023 · Chun-Hao Yang, Hai-Ping Tsui · The International Journal of Advanced Manufacturing Technology · 2
Adaptive Resource Allocation for OFDM-Based Single-Relay Cooperative Communication Systems over Rayleigh Fading Channels
2013 · Chuan-Wang Chang, Hong-Jin Lai, et al. · International Conference on Robot, Vision and Signal Processing · 2
Observation of Gap Phenomena and Development Processing Technology for ECDM of Sapphire
2024 · Chun-Hao Yang, Shao-Hua Yu, et al. · Processes · 1
Introduction of Taiwan Society of Electrical Machining Engineering
2022 · Hai-Ping Tsui, Albert Wen-Jeng Hsue, et al. · International Journal of Electrical Machining · 1
PDF
The Investigation of Electrochemical Slurry Jet Micro Machining on the SKD11 Mold Steel
2017 · Zhi Wen Fan, Lih Wu Hourng, et al. · Key engineering materials · 1
Study of the Orbital Circular Cutting in Quartz Wafers Using Electrochemical Discharge Machining with Micro-Electrodes
2026 · A-Cheng Wang, Jung-Chou Hung, et al. · Micromachines
PDF
Surface characterization of titanium oxide coating on SUS304 stainless steel by electrical discharge coating
2025 · Siddanna Awarasang, Jung-Chou Hung, et al. · Materials Today Communications
Works count: 34
Citation count: 294
H-index: 11
I10-index: 12
Year
Topic
Type