Get started
Author

Sefa Emre Sünbül

Observed names: S Emre Sünbül, S.E. Sünbül, Sefa Emre Sünbül, Sefa Emre Sunbul, Sefa Emre SÜNBÜL, Sefa Sünbül, Sunbul, Sefa Emre, Sünbül, Sefa Emre
ORCID: 0000-0002-2648-9268
Observed ORCID: 0000-0002-2648-9268
OpenAlex ID: A5020305028
Microstructure, wear and oxidation behavior of AlCrFeNiX (X = Cu, Si, Co) high entropy alloys produced by powder metallurgy
2021 · Azmi Erdogan, Sefa Emre Sunbul, et al. · Vacuum · 94
Effect of titanium addition on the corrosion behavior of CoCuFeNiMn high entropy alloy
2022 · Sultan Öztürk, Furkan Alptekin, et al. · Journal of Alloys and Compounds · 65
Determination of structural, tribological, isothermal oxidation and corrosion properties of Al–Co–Cr–Fe–Ni–Ti–Cu high-entropy alloy
2021 · Sefa Emre Sünbül, Kürşat İçi̇n, et al. · Vacuum · 48
Improvement of microstructure, tribology and corrosion characteristics of nickel-aluminum bronze by P/M method
2020 · Sultan Öztürk, Sefa Emre Sünbül, et al. · Tribology International · 40
Wear, corrosion and oxidation characteristics of consolidated and laser remelted high entropy alloys manufactured via powder metallurgy
2023 · Mertcan Kafali, Kadir Mert Doleker, et al. · Surface and Coatings Technology · 33
Mechanochemical synthesis of SrFe12O19 from recycled mill scale: Effect of synthesis time on phase formation and magnetic properties
2021 · Kürşat İÇİN, Sultan ÖZTÜRK, et al. · Journal of Alloys and Compounds · 33
Powder-pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations
2022 · Ali Gunen, Mourad Keddam, et al. · Journal of Alloys and Compounds · 28
A study on the structural, wear, and corrosion properties of CoCuFeNiMo high-entropy alloy
2024 · Sefa Emre Sünbül · Journal of Alloys and Compounds · 26
Effect of the stoichiometric ratio on phase evolution and magnetic properties of SrFe12O19 produced with mechanochemical process using mill scale
2020 · Kürşat İçi̇n, Sultan Öztürk, et al. · Ceramics International · 25
Boriding effect on CrFeMnNbNi high entropy alloy: Microstructure, micro-nano properties, wear behaviour
2024 · Dilara Atam, Sefa Emre Sunbul, et al. · Tribology International · 22
A comparative study of the correlation among the phase formation, crystal stability and magnetic properties of SrFe12-xMxO19 (M=Al3+, Cr3+ and Mn3+, x=0–0.5) ferrite permanent magnets
2023 · Kürşat Icin, Selmine Akyol, et al. · Journal of Solid State Chemistry · 21
Effects of melt spinning process parameters and wheel surface quality on production of 6060 aluminum alloy powders and ribbons
2020 · Sultan ÖZTÜRK, Sefa Emre SÜNBÜL, et al. · Transactions of Nonferrous Metals Society of China · 21
Mechanical, wear and corrosion behavior of Ti–6Al–xNb (x = 3.5–21 wt%) alloys manufactured by powder metallurgy
2023 · Zafer Gölbaşı, Bülent Öztürk, et al. · Powder Technology · 20
A comparative study on the surface degradation mechanisms of arc melted and laser remelted CoCrFeNiAl0.5Nb0.5 HEA
2023 · Kursat Icin, Sefa Emre Sunbul, et al. · Surface and Coatings Technology · 18
Effect of Co, Cu, and Mo alloying metals on electrochemical and magnetic properties of Fe-B alloy
2023 · Sefa Emre Sunbul, Selmine Akyol, et al. · Journal of Alloys and Compounds · 18
Investigation of nano-crystaline strontium hexaferrite magnet powder from mill scale waste by the mechanochemical synthesis: Effect of the annealing temperature
2022 · Kürşat Için, Sultan Öztürk, et al. · Materials Chemistry and Physics · 18
The production of binary Mg-Ni alloys and ternary Mg-Ni-based alloys: The structural and corrosion properties
2025 · Sefa Emre Sünbül, Kürşat İçi̇n, et al. · Journal of Alloys and Compounds · 16
The role of mechanical alloying on the phase structure and magnetic properties of Ni-doped CoFeAlMn high-entropy alloys
2025 · Sümran Bi̇lgi̇n, Bülent Öztürk, et al. · Journal of Alloys and Compounds · 12
Effect of Sn addition on mechanical, wear, and electrochemical properties of Ti-Al-Sn alloys
2024 · Zafer Gölbaşı, Bülent Öztürk, et al. · Powder Technology · 12
Comparison of Wear Behavior of Basic Oxygen Furnace Slag and WC-CoCr Coating
2024 · Dervis Ozkan, Ahmet Gulec, et al. · Journal of Materials Engineering and Performance · 12
PDF
Influence of Cu on phase formation, hardness, and magnetism in high-entropy alloys
2025 · Samet Topal, Sümran Bilgin, et al. · Journal of Alloys and Compounds · 10
Exploring the role of Fe in the wear and corrosion resistance of Ti-based alloys produced with conventional powder metallurgy
2024 · Zafer Gölbaşı, Kürşat Için, et al. · Tribology International · 10
Investigation and characterization of high purity and nano-sized SrCO3 production by mechanochemical synthesis process
2021 · Kürşat Için, Sultan Öztürk, et al. · Ceramics International · 9
Theoretical and experimental study of the titanium substituted Mg2-xTixNi alloys and Mg2-xTixNiH4 hydrides
2023 · Sefa Emre Sunbul, Kursat Icin, et al. · International Journal of Hydrogen Energy · 8
Comparison of hot corrosion behavior of Ti6Al4V and TiAlN-coated Ti6Al4V alloys in Na2SO4 -V2O5 environment
2026 · Burak Ceper, Ozge Ozgurluk, et al. · Surface and Coatings Technology · 7
Works count: 57
Citation count: 681
H-index: 16
I10-index: 22
Year
Topic
Type