Author

Simon C. Bellemare

Observed names: Bellemare, Simon C., S. Bellemare, S. C. Bellemare, S.C. Bellemare, Simon Bellemare

Observed institutions: National Research Council Canada, Polytechnique Montréal, Massachusetts Institute of Technology

OpenAlex ID: A5020692073

Effects of mechanical properties and surface friction on elasto-plastic sliding contact

2007 · S.C. Bellemare, M. Dao, et al. · Mechanics of Materials · 109

The frictional sliding response of elasto-plastic materials in contact with a conical indenter

2006 · S. Bellemare, M. Dao, et al. · International Journal of Solids and Structures · 83

PDF

Fatigue crack initiation and propagation in polyamide‐6 and in polyamide‐6 nanocomposites

2004 · Simon C. Bellemare, Martin N. Bureau, et al. · Polymer Composites · 46

PDF

A new method for evaluating the plastic properties of materials through instrumented frictional sliding tests

2010 · S.C. Bellemare, M. Dao, et al. · Acta Materialia · 40

Effects of substrate surface conditions on heat transfer and shell morphology in the solidification of a copper alloy

2001 · Dominique Bouchard, François G. Hamel, et al. · Metallurgical and Materials Transactions B · 26

Bulk fatigue damage evolution in polyamide‐6 and in a polyamide‐6 nanocomposite

2005 · Simon C. Bellemare, J. Ivan Dickson, et al. · Polymer Composites · 9

PDF

Calibration of a Nondestructive Toughness Tester (NDTT) for Measuring Fracture Toughness of Pipeline Steel

2018 · Steven D. Palkovic, Simon C. Bellemare, et al. · International Pipeline Conference (IPC) · 2

Nondestructive Evaluation for Yield Strength and Toughness of Steel Pipelines

2018 · S. D. Palkovic, K. Taniguchi, et al. · NACE CORROSION Conference · 2

Building Knowledge from Failure Analysis of Plastic Pipe and Other Hydraulic Structures

2011 · Phillip A. Sharff, Simon C. Bellemare, et al. · Journal of ASTM International · 2

Micro and nano mechanics of materials response during instrumented frictional sliding

2006 · Simon Bellemare · DSpace@MIT (Massachusetts Institute of Technology) · 1

PDF

Addressing Variation in Laboratory Toughness Testing for Vintage Pipelines Using Planing-Induced Microfracture.

2026 · Ryan Lacy, Intisar Rizwan i Haque, et al. · International Pipeline Pigging and Integrity Management Conference (PPIM)

Introduction of a Portable Field Instrument for In-Ditch Pipe Body Toughness Determination

2025 · Simon Bellemare, Bryan Feigel, et al. · International Pipeline Pigging and Integrity Management Conference (PPIM)

Non-Destructive Evaluation of Pipe Seam Toughness via Frictional Sliding

2024 · Intisar Rizwan I Haque, Ryan Lacy, et al. · International Pipeline Conference (IPC)

In-Situ Determination of Pipe Body Fracture Toughness Using Planing-Induced Microfracture Method

2024 · Xuejun Huang, Bryan Feigel, et al. · International Pipeline Conference (IPC)

Measuring Pipe Seam Toughness Via Frictional Sliding

2024 · Intisar Rizwan i Haque, Ryan Lacy, et al. · International Pipeline Pigging and Integrity Management Conference (PPIM)

Combining Nondestructive Techniques to Obtain Full Vintage Pipeline Asset Fracture Toughness at Both the Seam and Pipe Body

2023 · Intisar Rizwan i Haque, Bryan Feigel, et al. · International Pipeline Pigging and Integrity Management Conference (PPIM)

Overcoming Material and Test Variability Challenges in In-Situ Material Verification

2022 · Soheil Safari Loaliyan, Intisar Rizwan-I-Haque, et al. · International Pipeline Conference (IPC)

Collecting Lab Quality Pipe Material Properties in the Field

2022 · Parth Patel, Buddy Powers, et al. · International Pipeline Pigging and Integrity Management Conference (PPIM)

Advancements in Nondestructive Methods Using Frictional Sliding for Direct Assessment of Steel Pipelines and Welded Seams

2021 · Steven Palkovic, Simon Bellemare, et al.

PR-610-183867-R01 Fracture Toughness via In-ditch Non-destructive Testing - Validation

2020 · Steven Palkovic, Yasamin Salamat, et al.

Nondestructive Evaluation of Metal Strength, Toughness, and Ductility Through Frictional Sliding

2019 · Steven Palkovic, Parth Patel, et al. · ASME Pressure Vessels and Piping Conference (PVP)

PR-610-163756-R01 Hardness Strength and Ductility (HSD) Testing of Line Pipes Initial Validation

2017 · Simon Bellemare

Building Knowledge from Failure Analysis of Plastic Pipe and Other Hydraulic Structures

2011 · Phillip A. Sharff, Simon C. Bellemare, et al. · ASTM International eBooks

Works count: 25

Citation count: 321

H-index: 6

I10-index: 5