Get started
Author

Hamid Reza Vanaei

Observed names: H Vanaei, H. R. Vanaei, H.R. Vanaei, Hamid Reza Javadinejad, Hamid Reza VANAEI, Hamidreza Vanaei, Vanaei, Hamid Reza, Vanaei, Hamidreza
Observed institutions: Conservatoire National des Arts et Métiers, Centre National de la Recherche Scientifique, Isfahan University of Technology, Arts et Métiers, Laboratoire Ingénierie des Fluides Systèmes Énergétiques, Laboratoire Procédés et Ingénierie en Mécanique et Matériaux, Pôle Léonard de Vinci, HESAM Université, Ecole Supérieure d'Ingénieurs Léonard de Vinci
ORCID: 0000-0003-1501-0482
Observed ORCID: 0000-0003-1501-0482
OpenAlex ID: A5022277454
A review on pipeline corrosion, in-line inspection (ILI), and corrosion growth rate models
2016 · H.R. Vanaei, A. Eslami, et al. · International Journal of Pressure Vessels and Piping · 398
An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application
2020 · S. Vanaei, M.S. Parizi, et al. · Engineered Regeneration · 332
PDF
Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts
2020 · H. R. Vanaei, K. Raissi, et al. · Journal of Materials Science · 119
PDF
Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication
2020 · Hamidreza Vanaei, Mohammadali Shirinbayan, et al. · Polymer Engineering and Science · 96
PDF
3D Printed and Conventional Membranes—A Review
2022 · Baye Gueye Thiam, Anouar El Magri, et al. · Polymers · 94
PDF
Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering
2022 · Anouar El Magri, Salah Eddine Bencaid, et al. · Polymers · 90
PDF
Synthesis Characterization and Highly Protective Efficiency of Tetraglycidyloxy Pentanal Epoxy Prepolymer as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl Medium
2022 · Rachid Hsissou, Redouane Lachhab, et al. · Polymers · 80
PDF
3D Bioprinting of Polycaprolactone-Based Scaffolds for Pulp-Dentin Regeneration: Investigation of Physicochemical and Biological Behavior
2021 · Zohre Mousavi Nejad, Ali Zamanian, et al. · Polymers · 78
PDF
Experimental study of PLA thermal behavior during fused filament fabrication
2020 · Hamid Reza Vanaei, Mohammadali Shirinbayan, et al. · Journal of Applied Polymer Science · 68
PDF
Multi-scale damage analysis and fatigue behavior of PLA manufactured by fused deposition modeling (FDM)
2021 · Hamid Reza Vanaei, Mohammadali Shirinbayan, et al. · Rapid Prototyping Journal · 65
PDF
In-Process Monitoring of Temperature Evolution during Fused Filament Fabrication: A Journey from Numerical to Experimental Approaches
2021 · Hamid Reza Vanaei, Mohammadali Shirinbayan, et al. · Thermo · 61
PDF
Numerical Prediction for Temperature Profile of Parts Manufactured using Fused Filament Fabrication
2022 · H.R. Vanaei, S. Khelladi, et al. · Journal of Manufacturing Processes · 58
PDF
Investigating the effect of printing conditions and annealing on the porosity and tensile behavior of 3D ‐printed polyetherimide material in Z ‐direction
2022 · Salah‐Eddine Ouassil, Anouar El Magri, et al. · Journal of Applied Polymer Science · 50
A comparative in‐process monitoring of temperature profile in fused filament fabrication
2020 · H.R. Vanaei, M. Deligant, et al. · Polymer Engineering and Science · 41
PDF
Numerical–Experimental Analysis toward the Strain Rate Sensitivity of 3D-Printed Nylon Reinforced by Short Carbon Fiber
2022 · Hamid Reza Vanaei, Anouar El Magri, et al. · Materials · 37
PDF
Orientation-Dependent Mechanical Behavior of 3D Printed Polylactic Acid Parts: An Experimental–Numerical Study
2023 · Saeedeh Vanaei, Mohammadali Rastak, et al. · Machines · 30
PDF
Roadmap: Numerical-Experimental Investigation and Optimization of 3D-Printed Parts Using Response Surface Methodology
2022 · Hamid Reza Vanaei, Sofiane Khelladi, et al. · Materials · 30
PDF
Effects of Power and Laser Speed on the Mechanical Properties of AlSi7Mg0.6 Manufactured by Laser Powder Bed Fusion
2022 · Sébastien Vaudreuil, Salah-Eddine Bencaid, et al. · Materials · 24
PDF
Optimized bioactive glass/PLA nanocomposites for bone tissue engineering: balancing mechanical strength and biodegradability
2025 · Razie Moradi, Majid Vaseghi, et al. · International Journal of Polymeric Materials · 16
Towards an Accurate Aerodynamic Performance Analysis Methodology of Cross-Flow Fans
2022 · Rania M. Himeur, Sofiane Khelladi, et al. · Energies · 11
PDF
A hybrid genetic algorithm-neural network model for optimizing thermal and mechanical characteristics of 3D-printed parts
2025 · Hamid Reza Vanaei, Mohammad Moezzibadi, et al. · Rapid Prototyping Journal · 6
Performance and Efficiency of Cross-Flow Fans—A Review
2023 · Hamid Reza Vanaei, Sofiane Khelladi, et al. · Energies · 5
PDF
3D Printing Process and Local Preheating Technique Study Using a Laser‐Based Method
2025 · Hamid Reza Vanaei, Kaddour Raissi, et al. · Polymer Engineering and Science · 3
PDF
Importance of Machine Learning in 3D Bioprinting
2024 · Shohreh Vanaei, Saeedeh Vanaei, et al. · Wiley eBooks · 3
3D Printing as a Multidisciplinary Field
2024 · Hamid Reza Vanaei, Sofiane Khelladi, et al. · Wiley eBooks · 3
Works count: 75
Citation count: 1,820
H-index: 18
I10-index: 20
Year
Topic
Type