Get started
Author

Mihail Zagorski

Observed names: M. Zagorski, Mihail H. Zagorski, Zagorski, Mihail
ORCID: 0000-0001-7362-957X
Observed ORCID: 0000-0001-7362-957X
OpenAlex ID: A5024137196
Static and Kinetic Friction of 3D Printed Polymers and Composites
2024 · Nikolay Stoimenov, Mara Kandeva, et al. · Tribology in Industry · 16
PDF
Investigation on wear of biopolymer parts produced by 3D printing in lubricated sliding conditions
2022 · Mihail Zagorski, Georgi Todorov, et al. · Industrial Lubrication and Tribology · 14
Friction Properties of the Heat-Treated Electroless Ni Coatings Embedded with c-BN Nanoparticles
2022 · Mara Kandeva, Mihail Zagorski, et al. · Coatings · 13
PDF
Investigation of different FDM/FFF 3D printing methods for improving the surface quality of 3D printed parts
2022 · Mihail Zagorski, Yavor Sofronov, et al. · AIP conference proceedings · 11
An Innovative Approach for Delamination of Solar Panels Using a Heated Metal Wire
2025 · Mihail Zagorski, Konstantin Dimitrov, et al. · Recycling · 9
PDF
Investigation of the Mechanical Properties of Thermosetting Polymers Reinforced with Carbon Particles
2025 · Boyan Dochev, Desislava Dimova, et al. · International Scientific Conference TechSys — Engineering, Technology and Systems (TechSys) · 4
PDF
Approaches to Creating Colorful 3D-Printed Parts and Reliefs
2025 · Mihail Zagorski, Radoslav Miltchev, et al. · International Scientific Conference TechSys — Engineering, Technology and Systems (TechSys) · 3
PDF
Wear at Boundary Friction of 3D Printed Polymers and Composites
2024 · G. Kotseva, M. Kandeva, et al. · International Conference on Control, Decision and Information Technologies (CoDIT) · 3
Computer Modeling and Simulation of Mechanisms Using Free and Open-source Software
2024 · Mihail Zagorski, Radoslav Miltchev, et al. · Environment Technology Resources Proceedings of the International Scientific and Practical Conference · 3
Mechanical Characterization of PETG/TPU Multi-Material 3D-Printed Samples and Fabrication of a Test Part
2026 · Mihail Zagorski, Radoslav Miltchev, et al. · International Scientific Conference TechSys — Engineering, Technology and Systems (TechSys) · 2
Facilitation of the 3d Scanning Process of Industrial Sites Using a Self-moving Autonomous Robotic System
2024 · Mihail Zagorski, Radoslav Miltchev · Environment Technology Resources Proceedings of the International Scientific and Practical Conference · 2
PDF
Investigation of the Influence of the Manufacturing Process on the Structure of Hypereutectic Aluminium-silicon Alloys
2024 · Boyan Dochev, Desislava Dimova, et al. · Environment Technology Resources Proceedings of the International Scientific and Practical Conference · 2
PDF
Comparative Study of Wear Behavior of Hypereutectic Al–Si Piston Alloys Using Experimental and Numerical Methods
2026 · Atanasi Tashev, Valyo Nikolov, et al. · Materials · 1
Investigation of the Structural, Mechanical and Operational Properties of an Alloy AlSi18Cu3CrMn
2025 · Desislava Dimova, Boyan Dochev, et al. · Materials · 1
PDF
Environmentally Sustainable Machining of Complex Parts Using 3D Scanning and Virtual Models
2025 · Todor T. Todorov, Todor Gavrilov, et al. · IOP Conference Series Earth and Environmental Science · 1
PDF
Development of composites based on thermosetting polymers with cenospheres fillers
2025 · Boyan Dochev, Desislava Dimova, et al. · IOP Conference Series Earth and Environmental Science · 1
Development of Composites Based on Thermosetting Polymers (epoxy, Polyester and Vinylester Resins) With Cenosphere Fillers in Different Concentrations – 5 Wt.%, 10 Wt.% and 15 Wt.%
2025 · Boyan Dochev, Filip Ublekov, et al. · Environment Technology Resources Proceedings of the International Scientific and Practical Conference · 1
PDF
Reverse engineering and optimization of small-scale objects for humanoid robotic systems
2025 · Mihail Zagorski, Radoslav Miltchev, et al. · AIP conference proceedings · 1
Development of a Conveyor Belt with a Computer Vision Module for Educational Purposes
2024 · Mihail Zagorski, Radoslav Miltchev, et al. · International Symposium on Innovative Approaches in Smart Technologies (ISAS) · 1
Investigation of the Influence of Artificial Aging Parameters on the Micro and Macro Hardness of Alsi12cu5mgcr and Alsi12cu5mn Alloys
2024 · Boyan Dochev, Desislava Dimova, et al. · Environment Technology Resources Proceedings of the International Scientific and Practical Conference · 1
PDF
Investigation of the Structure of Alsi25cu4cr and Alsi25cu5cr Alloys
2023 · Boyan Dochev, Desislava Dimova, et al. · Environment Technology Resources Proceedings of the International Scientific and Practical Conference · 1
PDF
Waste-Reducing Restoration of Defective 3D Printed Parts
2026 · Mihail Zagorski, Radoslav Miltchev, et al. · IOP Conference Series Earth and Environmental Science
PDF
Application of 3D-Printed Patterns in Sand Casting
2026 · Mihail Zagorski, Krum Petrov, et al. · International Scientific Conference TechSys — Engineering, Technology and Systems (TechSys)
From Pixels to 3D Meshes: Assessing AI-Based Single-Image Reconstruction for 3D Printing
2026 · Mihail Zagorski, Radoslav Miltchev, et al. · International Scientific Conference on Information, Communication and Energy Systems and Technologies (ICEST)
Photovoltaic Panels’ Thermo-Mechanical Delamination by Electric Resistive Heating
2026 · Valentin Kamburov, Mihail Zagorski, et al. · Recycling
PDF
Works count: 34
Citation count: 91
H-index: 5
I10-index: 4
Year
Topic
Type