Get started
Author

Ilyass Tabiai

Observed names: I. Tabiai, Ilyass, Tabiai, Tabiai, I., Tabiai, Ilyass
ORCID: 0000-0003-1777-1437
Observed ORCID: 0000-0003-1777-1437
OpenAlex ID: A5026011560
Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding
2019 · Ilyass Tabiai, Gleb Tkachev, et al. · Engineering Fracture Mechanics · 39
Generalization of the ordinary state-based peridynamic model for isotropic linear viscoelasticity
2017 · Rolland Delorme, Ilyass Tabiai, et al. · Mechanics of Time-Dependent Materials · 28
In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load
2019 · I. Tabiai, D. Texier, et al. · Experimental Mechanics · 17
In-situ Full Field Measurements During Inter-Facial Debonding in Single Fiber Composite Under Transverse Load
2018 · I. Tabiai, R. Delorme, et al. · Experimental Mechanics · 15
Degradation mechanisms of CF/PPS, CF/PEI, and CF/PEEK under combined UV radiation and condensation
2025 · Annelise Jean-Fulcrand, Ewen Léger, et al. · Composites Part A Applied Science and Manufacturing · 13
Reassessing anisotropy in 3D printed structures: The role of extrudate geometry vs interface bonding
2025 · Maryam Shokrollahi, Adam W. Smith, et al. · Journal of Manufacturing Processes · 11
Upcycling of unidirectional carbon-fibre/PEEK prepreg trim waste
2025 · A.W. Smith, H. Pattery, et al. · Composites Part A Applied Science and Manufacturing · 10
3D printing LDPE/lunar regolith simulant composite: manufacturing with in-situ resources on the moon
2025 · S. Moazen, F.P. Gosselin, et al. · Acta Astronautica · 9
Extracting Constitutive Mechanical Parameters in Linear Elasticity Using the Virtual Fields Method Within the Ordinary State-Based Peridynamic Framework
2020 · Rolland Delorme, Patrick Diehl, et al. · Journal of Peridynamics and Nonlocal Modeling · 7
PDF
Large scale fused-granular-fabrication using recycled carbon fibre/PEKK-PEEK pellets derived from aerospace prepreg waste
2025 · Ruan-Isabelle Richard Soucy, Adam W. Smith, et al. · Composites Communications · 6
Air leaks: Stapling affects porcine lungs biomechanics
2021 · Bénédicte Bonnet, Ilyass Tabiai, et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 6
PDF
Polymer micro-lattice buffer structure free impact absorption
2026 · Louis Catar, Ilyass Tabiai, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 4
Long term availability of raw experimental data in experimental fracture mechanics
2018 · Patrick Diehl, Ilyass Tabiai, et al. · Engineering Fracture Mechanics · 4
PDF
Influence of interface notch geometry on the tensile behaviour of FGF-printed parts
2025 · M. Shokrollahi, A.W. Smith, et al. · Journal of Achievements of Materials and Manufacturing Engineering · 3
A versatile hot melt centrifugal spinning apparatus for thermoplastic microfibres production
2023 · Jason Gunther, Jacques Lengaigne, et al. · HardwareX · 3
PDF
Extrudate-level analysis of extrusion rate effects in fused filament fabrication
2026 · Maryam Shokrollahi, Olivier Lampron, et al. · Progress in Additive Manufacturing · 2
Flexible Dry Electrodes Based on Styrene‐Ethylene‐Butylene‐Styrene/Carbon Black and Ethylene‐Vinyl Acetate/Carbon Black for Electroencephalography: Electrical, Thermal and Mechanical Properties
2025 · George Gnonhoue, Éric David, et al. · Journal of Applied Polymer Science · 2
PDF
Hybrid Flexible Dry Electrodes for Electroencephalography: Electrical and Thermo‐Mechanical Properties
2025 · George Gnonhoue, Éric David, et al. · Journal of Applied Polymer Science · 2
PDF
A Study on the Influence of Polypropylene Melt Flow Index on Nonwoven Fibers Produced Through Hot Melt Centrifugal Spinning
2024 · Jason Gunther, Mélanie Girard, et al. · Journal of Manufacturing Science and Engineering · 2
Additive Manufacturing Strategy for Ultra-Lightweight High Value-Added Components
2022 · Louis Catar, Ilyass Tabiai, et al. · ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) · 2
Additional data for "Air leaks: stapling affects lungs biomechanics"
2020 · Bonnet, Bénédicte, Tabiai, Ilyass, et al. · Figshare · 2
Additional Data For The "In-Situ Full Field Measurement During Inter-Facial Debonding In Single Fiber Composite Under Transverse Load"
2018 · Tabiai, Ilyass, Delorme, Rolland, et al. · Zenodo (CERN European Organization for Nuclear Research) · 2
A multimechanism perspective on interlayer behaviour in material extrusion additive manufacturing
2026 · Maryam Shokrollahi, Adam W. Smith, et al. · Rapid Prototyping Journal · 1
From Bench to Flight: Translating Drone Impact Tests into Operational Safety Limits
2026 · Aziz Mohamed Mili, Louis Catar, et al. · International Conference on Unmanned Aircraft Systems (ICUAS) · 1
Electrical and thermo-mechanical properties of styrene-ethylene-butylene-styrene/carbon nanotube and styrene-ethylene-butylene-styrene/carbon black multipin electrodes for electroencephalography
2025 · George Gnonhoue, Ilyass Tabiai, et al. · Sensors and Actuators A Physical · 1
Works count: 66
Citation count: 207
H-index: 8
I10-index: 7
Year
Topic
Type