Get started
Author

R. Seetharam

Observed names: R Seetharam, Rathlavath Seetharam, Seetharam, R.
ORCID: 0000-0001-5997-6217
Observed ORCID: 0000-0001-5997-6217
OpenAlex ID: A5026022209
A review on microstructures, mechanical properties and processing of high entropy alloys reinforced composite materials
2023 · Deepak Kumar, R. Seetharam, et al. · Journal of Alloys and Compounds · 94
A comprehensive review: Discussed the effect of high-entropy alloys as reinforcement on metal matrix composite properties, fabrication techniques, and applications
2024 · Vivek Pandey, R. Seetharam, et al. · Journal of Alloys and Compounds · 83
Fabrication and characterization of Al alloy composites reinforced with nanocrystalline Al4CrFeMnTi0.25 high-entropy alloy particles via double ultrasonic stir casting for aerospace applications
2024 · Vivek Pandey, R. Seetharam, et al. · Journal of Alloys and Compounds · 51
Hot workability and densification behavior of sintered powder metallurgy Al-B4C preforms during upsetting
2017 · R. Seetharam, S. Kanmani Subbu, et al. · Journal of Manufacturing Processes · 40
Influence of Ultrasonic Vibration towards the Microstructure Refinement and Particulate Distribution of AA7150-B4C Nanocomposites
2022 · Pagidi Madhukar, Vipin Mishra, et al. · Coatings · 22
PDF
Effects of graphene nano particles on interfacial microstructure and mechanical properties of Al7150/B4C hybrid nanocomposite fabricated by novel double ultrasonic two stage stir casting technique
2024 · Deepak Kumar, R. Seetharam, et al. · Journal of Alloys and Compounds · 21
Microstructure Modeling of Dynamically Recrystallized Grain Size of Sintered Al–4 wt % B4C Composite During Hot Upsetting
2017 · R. Seetharam, S. Kanmani Subbu, et al. · Journal of Engineering Materials and Technology · 18
Characteristics of work hardening and constitutive models comparison of powder metallurgy Al-5.6Zn-2Mg alloy during hot compression
2024 · Harikrishna Katika, R. K. Damoda, et al. · Journal of Central South University · 15
Mathematical Models to Predict Flow Stress and Dynamically Recrystallized Grain Size of Deformed AA7150-5 wt% B4C Composite Fabricated Using Ultrasonic-Probe Assisted Stir Casting Process
2021 · R. Seetharam, Pagidi Madhukar, et al. · Metals and Materials International · 15
Synergic Effects of Interfacial Compounds and Strengthening Mechanisms in Enhancing Mechanical Strength of Al-B4C-GNPs Hybrid Nanocomposite
2024 · Deepak Kumar, R. Seetharam, et al. · Metals and Materials International · 13
Analysis of Grain Size Evolution of Sintered Al–4wt.%B4C Preforms Subjected to Hot Compression
2018 · R. Seetharam, S. Kanmani Subbu, et al. · Metallography Microstructure and Analysis · 12
Investigating the effects of deformation-induced densification on the constitutive behavior and corrosion resistance of Al–Zn–Mg powder metallurgy alloy during hot deformation
2023 · Katika Harikrishna, MJ Davidson, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 10
Modeling, dislocation pinning and softening mechanism in Al7150-B4C-graphene hybrid nanocomposite with identified safe processing parameters during hot deformation
2025 · Deepak Kumar, Katika Harikrishna, et al. · Materials Characterization · 9
A novel sintering approach for interface diffusion layer control in Al–Al₄CrFeMnTi₀.₂₅ high-entropy alloy composites: Microstructure, strength, and corrosion resistance
2025 · Katika Harikrishna, Shaik Yaseen Meera, et al. · Journal of Alloys and Compounds · 9
Microstructure and Mechanical Behavior of Various Solution Treated Biomedical Superelastic NiTi Shape Memory Alloy: An Experimental Investigation
2025 · Santosh Kumar Rajak, Katika Harikrishna, et al. · Journal of Materials Engineering and Performance · 8
Investigation of mechanical properties of glass fibre/SiC- B4C reinforced hybrid polymer composite
2023 · Gaurav Rathore, R. Seetharam · Materials Today Proceedings · 8
Influence of Reinforcement Particles on Dynamically Recrystallized Grain of Hot Upset Sintered Al-B4C Composites
2022 · R. Seetharam, S. Kanmani Subbu, et al. · Journal of Materials Engineering and Performance · 8
Investigation of single-stage incremental hole flanging of AA1050 through conical tool
2025 · Abhay Kumar Dubey, Harshal Y. Shahare, et al. · Materials and Manufacturing Processes · 4
Mechanical and dry sliding wear analysis of porcelain reinforced SAE660 bronze bearing alloy composite fabricated by stir casting method
2023 · Santosh Kumar Rajak, Deepak Kumar, et al. · Materials Today Proceedings · 3
Influence of Temperature on the Workability and Hardness of Sintered Al-4%B 4 C in Upsetting Test
2017 · R. Seetharam, S. Kanmani Subbu, et al. · Procedia Engineering · 3
PDF
Investigation of Microstructural and Mechanical Properties of Mg-HEA Nanocomposite Through Ultrasonic Assisted Two Step Stir Casting Technique
2024 · Deepak Kumar, R. Seetharam, et al. · Green energy and technology · 2
Influence of TiC nano‐particulates on the physical and mechanical properties of AA7150‐TiC MMC: Fabricated by advanced novel process
2021 · Pagidi Madhukar, N. Selvaraj, et al. · Nano Select · 2
PDF
Modeling flow behavior of sintered Al–4%B4C composite during high–temperature upsetting
2019 · R Seetharam, S K Kanmani Subbu, et al. · Materials Research Express · 2
Microstructure and Strengthening Mechanisms of Al7150 Composites Reinforced with Al4CrFeMnTi0.25 High-Entropy Alloy Nanoparticles via Ultrasonic Stir Casting
2025 · Vivek Pandey, Deepak Kumar, et al. · Journal of Materials Engineering and Performance
The Various Types of Severe Plastic Deformation Processes to Develop Ultrafine Grain Structure in Materials with Enhanced Mechanical Properties
2025 · Deepak Kumar, Murlidhar Patel, et al. · CRC Press eBooks
Works count: 26
Citation count: 452
H-index: 11
I10-index: 12
Year
Topic
Type