Get started
Author

Hüseyin Aydın

Observed names: Aydin Hüseyin, H. Aydin, Huseyin Aydin, Hüseyin Aydin
ORCID: 0000-0002-8600-2984
Observed ORCID: 0000-0002-8600-2984
OpenAlex ID: A5026323803
Development of 3rd generation AHSS with medium Mn content alloying compositions
2012 · Huseyin Aydin, Elhachmi Essadiqi, et al. · Materials Science and Engineering A · 273
Process parameter optimization for laser powder directed energy deposition of Inconel 738LC
2024 · Hamidreza Javidrad, Huseyin Aydin, et al. · Optics & Laser Technology · 56
Effect of intercritical annealing parameters on dual phase behavior of commercial low-alloyed steels
2010 · Aydin Hüseyin, Kazdal Zeytin Havva, et al. · Journal of Iron and Steel Research International · 56
Microstructure Evolution of a Medium Manganese Steel During Thermomechanical Processing
2016 · Binhan Sun, Huseyin Aydin, et al. · Metallurgical and Materials Transactions A · 53
PDF
The Effects of Contact Conditions on the Onset of Shear Instability in Cold-Spray
2015 · Fanchao Meng, Huseyin Aydin, et al. · Journal of Thermal Spray Technology · 35
Cold Sprayability of Mixed Commercial Purity Ti Plus Ti6Al4V Metal Powders
2017 · Huseyin Aydin, Mashael Alomair, et al. · Journal of Thermal Spray Technology · 31
Effect of microstructure on exhaust manifold cracks produced from SiMo ductile iron
2009 · Havva Kazdal Zeytin, Ceylan Kubilay, et al. · Journal of Iron and Steel Research International · 28
Twinning and Tripping in 10% Mn steels
2013 · Huseyin Aydin, In-Ho Jung, et al. · Materials Science and Engineering A · 27
Investigation of dual phase transformation of commercial low alloy steels: Effect of holding time at low inter-critical annealing temperatures
2008 · Havva K. Zeytin, Ceylan Kubilay, et al. · Materials Letters · 27
Effects of powder characteristics and mixing powders on cold sprayability and corrosion properties of tantalum coatings
2021 · Xin Chu, Fanchao Meng, et al. · Surface and Coatings Technology · 19
Development of a Novel Biodegradable Metallic Stent Based on Microgalvanic Effect
2015 · Jennifer Frattolin, Rajib Barua, et al. · Annals of Biomedical Engineering · 19
Investigating cube-corner indentation hardness and strength relationship under quasi-static and dynamic testing regimes
2016 · Abhi Ghosh, Javier Arreguin-Zavala, et al. · Materials Science and Engineering A · 16
Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of the directed energy deposition IN738LC and IN718: A comparative study
2025 · Hamidreza Javidrad, Fatih Güler, et al. · Materials Characterization · 14
Correlation of work function and stacking fault energy through Kelvin probe force microscopy and nanohardness in dilute α-magnesium
2024 · Yiğit Türe, Ali Arslan Kaya, et al. · Journal of Magnesium and Alloys · 9
Comparing Compression Deformation and Rate Sensitivity of Additively Manufactured and Extruded-Annealed 316L Alloys
2021 · Samed Enser, Hakan Yavas, et al. · Journal of Materials Engineering and Performance · 9
Effect of Intercritical Heat Treatment on the Microstructure and Mechanical Properties of Medium Mn Steels
2013 · Huseyin Aydin, Elhachmi Essadiqi, et al. · ISIJ International · 7
PDF
Improving Cyclic Oxidation Resistance of Additively Manufactured IN939 Superalloy via Chemical Vapor Aluminizing
2025 · Fatih Guler, Ahmet Arda Inceyer, et al. · Advanced Engineering Materials · 6
Improving Cold Sprayability—Mixed Metal Powders
2015 · Stephen Yue, Wilson Wong, et al. · Thermal spray · 6
Enhanced strength and ductility in an additively manufactured Al10SiMg alloy at cryogenic temperatures
2025 · Muhammad Naeem, Asif Ur Rehman, et al. · Communications Materials · 5
PDF
Creep failure analysis of directionally solidified CM247LC superalloy
2025 · Müge Akdemir, Hüseyin Aydın, et al. · Materials Testing · 5
Investigation of the Post-Processing Heat Treatments on Hot Tensile Properties of Selectively Laser Melted IN939 Superalloy
2024 · Fatih Güler, Aylin Şahin Kahraman, et al. · Kocaeli Journal of Science and Engineering · 5
PDF
Microstructure-informed modeling of LPBF AlSi10Mg components: understanding the origin of tensile anisotropy through local stress-strain partitioning using comparative crystal plasticity material models
2026 · Muhammad Muteeb Butt, Faisal Qayyum, et al. · Mechanics of Materials · 2
The Microstructural Characterization of Dual Phase Steel with the Method of Chemical Etching
2008 · Ceylan Kubilay, Havva Kazdal Zeytin, et al. · Practical Metallography · 2
Development of a Metallic Biodegradable Stent Based on Microgalvanic Corrosion1
2014 · Rajib Barua, Huseyin Aydin, et al. · Journal of Medical Devices · 1
Degradation Behavior of Nanostructured Stent Materials Using Cold Spray
2013 · R. Barua, R. Mongrain, et al. · Volume 1A: Abdominal Aortic Aneurysms; Active and Reactive Soft Matter; Atherosclerosis; BioFluid Mechanics; Education; Biotransport Phenomena; Bone, Joint and Spine Mechanics; Brain Injury; Cardiac Mechanics; Cardiovascular Devices, Fluids and Imaging; Cartilage and Disc Mechanics; Cell and Tissue Engineering; Cerebral Aneurysms; Computational Biofluid Dynamics; Device Design, Human Dynamics, and Rehabilitation; Drug Delivery and Disease Treatment; Engineered Cellular Environments · 1
Works count: 29
Citation count: 712
H-index: 13
I10-index: 13
Year
Topic
Type