Author

Sjirk Koekebakker

Observed names: Koekebakker Sjirk, Koekebakker, SH Sjirk, Koekebakker, Sjirk, S. H. Koekebakker, S. H. Koekebakker Oce, S. Koekebakker, S.H. Koekebakker, SH Sjirk Koekebakker

Observed institutions: École Centrale de Lyon, Tio Business School, Canon (Netherlands), Laboratoire Ampère, Eindhoven University of Technology, Delft University of Technology

ORCID: 0000-0003-3622-6717

Observed ORCID: 0000-0003-3622-6717

OpenAlex ID: A5028301476

Model based control of a flight simulator motion system

2001 · Sjirk Koekebakker · Research Repository (Delft University of Technology) · 95

Using iterative learning control with basis functions to compensate medium deformation in a wide-format inkjet printer

2014 · Joost Bolder, Tom Oomen, et al. · Mechatronics · 76

PDF

Resource-efficient ILC for LTI/LTV systems through LQ tracking and stable inversion: Enabling large feedforward tasks on a position-dependent printer

2016 · Jurgen van Zundert, Joost Bolder, et al. · Mechatronics · 58

A Waveform Design Method for a Piezo Inkjet Printhead Based on Robust Feedforward Control

2012 · Amol A. Khalate, Xavier Bombois, et al. · Journal of Microelectromechanical Systems · 58

Enhancing Flatbed Printer Accuracy and Throughput: Optimal Rational Feedforward Controller Tuning Via Iterative Learning Control

2016 · Joost Bolder, Jurgen van Zundert, et al. · IEEE Transactions on Industrial Electronics · 57

PDF

Physics-guided neural networks for feedforward control with input-to-state-stability guarantees

2024 · Max Bolderman, Hans Butler, et al. · Control Engineering Practice · 41

Sequential Multiperiod Repetitive Control Design With Application to Industrial Wide-Format Printing

2020 · Lennart Blanken, Patrick Bevers, et al. · IEEE/ASME Transactions on Mechatronics · 26

Data-driven feedforward tuning using non-causal rational basis functions: With application to an industrial flatbed printer

2020 · Lennart Blanken, Sjirk Koekebakker, et al. · Mechatronics · 23

PDF

Multivariable Repetitive Control: Decentralized Designs With Application to Continuous Media Flow Printing

2019 · Lennart Blanken, Sjirk Koekebakker, et al. · IEEE/ASME Transactions on Mechatronics · 23

Iterative learning control with basis functions for media positioning in scanning inkjet printers

2012 · Joost Bolder, Bas Lemmen, et al. · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · 18

Flexible ILC: Towards a Convex Approach for Non-Causal Rational Basis Functions

2017 · Lennart Blanken, Goksan Isil, et al. · IFAC-PapersOnLine · 17

Design Techniques for Multivariable ILC: Application to an Industrial Flatbed Printer

2016 · Lennart Blanken, Jeroen Willems, et al. · IFAC-PapersOnLine · 14

Minimization of cross-talk in a piezo inkjet printhead based on system identification and feedforward control

2012 · Amol A Khalate, Xavier Bombois, et al. · Journal of Micromechanics and Microengineering · 11

PDF

Data-Driven Feedforward Learning using Non-Causal Rational Basis Functions: Application to an Industrial Flatbed Printer

2018 · Lennart Blanken, Goksan Isil, et al. · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · 10

Multivariable repetitive control design framework applied to flatbed printing with continuous media flow

2017 · Lennart Blanken, Tim Hazelaar, et al. · IEEE Conference on Decision and Control (CDC) · 10

Multirate repetitive control for an industrial print-belt system

2024 · Leontine Aarnoudse, Kevin Cox, et al. · Mechatronics · 8

Minimization of cross-talk for an inkjet printhead using MIMO ILC

2006 · M.B.G. Wassink, O.H. Bosgra, et al. · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · 8

Piezo Printhead Control: Jetting Any Drop at Any Time

2013 · Sjirk Koekebakker, Mohamed Ezzeldin, et al. · Embedded systems · 6

Modeling of an inkjet printhead for Iterative Learning Control using bilaterally coupled multiports

2006 · M.B.G. Wassink, O.H. Bosgra, et al. · IEEE Conference on Decision and Control (CDC) · 6

Design and modeling aspects in multivariable iterative learning control

2016 · Lennart Blanken, Sjirk Koekebakker, et al. · IEEE Conference on Decision and Control (CDC) · 5

Improving the drop-consistency of an inkjet printhead using meniscus-based Iterative Learning Control

2006 · M.B. Groot Wassink, F. Zollner, et al. · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · 5

Sensorless Field-Oriented Estimation of Hybrid Stepper Motors in High-Performance Paper Handling

2019 · Tuan Dat Hoang, Amritam Das, et al. · IEEE Conference on Control Technology and Applications (CCTA) · 4

Combining ILC and repetitive control to handle repeating, event-triggered disturbances in precision inkjet printing

2015 · Ronald Winarto, Sjirk Koekebakker, et al. · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · 4

Physics–guided neural networks for inversion–based feedforward control applied to hybrid stepper motors*

2023 · D. Fan, M. Bolderman, et al. · IEEE Conference on Control Technology and Applications (CCTA) · 3

Performance Improvement of a Drop-on-Demand Inkjet Printhead: a Feedforward Control Based Approach

2011 · Amol A. Khalate, Xavier Bombois, et al. · Technical programs and proceedings/Technical program and proceedings · 3

PDF

Works count: 64

Citation count: 606

H-index: 12

I10-index: 15