Get started
Author

Gowrishankar Ganesan

Observed names: G Ganesan, G. GANESAN, G. Ganesan, Ganesan G
ORCID: 0000-0002-8200-7163
Observed ORCID: 0000-0002-8200-7163
OpenAlex ID: A5029206839
Study on tool wear and surface roughness in machining of particulate aluminum metal matrix composite-response surface methodology approach
2009 · M. Seeman, G. Ganesan, et al. · The International Journal of Advanced Manufacturing Technology · 171
Bio-composites: Development and mechanical characterization of banana/sisal fibre reinforced poly lactic acid (PLA) hybrid composites
2014 · B. Asaithambi, G. Ganesan, et al. · Fibers and Polymers · 130
Study of electrochemical machining characteristics of Al/SiCp composites
2008 · C. Senthilkumar, G. Ganesan, et al. · The International Journal of Advanced Manufacturing Technology · 111
Development of processing maps for 6061 Al/15% SiCp composite material
2004 · G Ganesan, K Raghukandan, et al. · Materials Science and Engineering A · 100
Parametric optimization of electrochemical machining of Al/15% SiCp composites using NSGA-II
2011 · C. SENTHILKUMAR, G. GANESAN, et al. · Transactions of Nonferrous Metals Society of China · 54
Development of processing map for 6061 Al/15% SiCp through neural networks
2005 · G. Ganesan, K. Raghukandan, et al. · Journal of Materials Processing Technology · 54
Influence of variables in deep drawing of AA 6061 sheet
2010 · S. RAJU, G. GANESAN, et al. · Transactions of Nonferrous Metals Society of China · 51
An Investigation on the Mechanical and Tribological Properties of an Ultrasonic-assisted Stir Casting Al-cu-mg Matrix-based Composite Reinforced With Agro Waste Ash Particles
2024 · Nagaraju Tenali, G. Ganesan, et al. · Applied Engineering Letters Journal of Engineering and Applied Sciences · 35
PDF
Heat treatment optimization for tensile properties of 8011 Al/15% SiCp metal matrix composite using response surface methodology
2015 · V. Vembu, G. Ganesan · Defence Technology · 33
PDF
A CRITICAL STUDY ON MACHINING OF Al/SiC COMPOSITES
2001 · R. Karthikeyan, G. Ganesan, et al. · Materials and Manufacturing Processes · 33
An investigation of hot deformation response of particulate-reinforced magnesium+9% titanium composite
2007 · B.K. Raghunath, R. Karthikeyan, et al. · Materials & Design (1980-2015) · 29
Hot Deformation Behavior of 2124 Al Alloy
2006 · S. Ramanathan, R. Karthikeyan, et al. · Journal of Material Science and Technology · 26
Studies on Tribological Behavior of Polyamide Filled Jute Fiber-Nano-ZnO Hybrid Composites
2014 · P. Rajasekhar, G. Ganesan, et al. · Procedia Engineering · 24
PDF
Bi-performance optimization of electrochemical machining characteristics of Al/20%SiCp composites using NSGA-II
2010 · C Senthilkumar, G Ganesan, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 24
Optimization of ECM Process Parameters Using NSGA-II
2012 · Chinnamuthu Senthilkumar, Gowrishankar Ganesan, et al. · Journal of Minerals and Materials Characterization and Engineering · 21
PDF
Modelling and analysis of electrochemical machining of cast Al/20%SiCp composites
2009 · C. Senthilkumar, G. Ganesan, et al. · Materials Science and Technology · 19
Influence of Input Parameters on Characteristics of Electro Chemical Machining Process
2013 · C. Senthilkumar, G. Ganesan, et al. · 15
Comparative study on the wear behavior of long and short glass fiber reinforced plastics
2010 · V. Srinivasan, R. Karthikeyan, et al. · Metals and Materials International · 15
Wear Mechanism of Glass Fiber Reinforced Epoxy Composites Under Dry Sliding Using Fuzzy Clustering Technique
2008 · V. Srinivasan, B. Asaithambi, et al. · Journal of Reinforced Plastics and Composites · 13
Taguchi-based grey relational analysis for multi-response optimization of the characteristics of HRAMMCs reinforced with agro-waste and SiC produced by ultrasonic-assisted bottom pour two-stage stir casting
2024 · Nagaraju Tenali, G Ganesan, et al. · Materials Research Express · 8
A study on the effects of hybrid (SIC- PSSA) nano sized reinforcement on mechanical and tribological behaviour of Al alloy-based metal matrix composite produced by ultrasonic assisted stir casting
2024 · Nagaraju Tenali, G Ganesan, et al. · Materials Research Express · 8
Investigation of the mechanical behavior of epoxy composites filled with bagasse ash and pistachio shell ash: a comparative study
2024 · Dittakavi Tarun, G. Ganesan, et al. · Applied Engineering Letters Journal of Engineering and Applied Sciences · 8
PDF
An experimental study on the behaviour of GFRP pultruded I beam reinforced with CFRP laminates
2018 · G. Ganesan, G. Kumaran · International Journal of Advanced Technology and Engineering Exploration · 7
PDF
Modeling of ECM process parameters
2018 · Chinnamuthu Senthilkumar, Gowrishankar Ganesan · Materials Testing · 6
Enhancing predictive modeling of nano metal matrix composites with LEO-HDNN approach
2024 · N. Sudheer Kumar Varma, P. Rajasekhar, et al. · International Journal on Interactive Design and Manufacturing (IJIDeM) · 5
Works count: 44
Citation count: 1,046
H-index: 16
I10-index: 19
Year
Topic
Type