Get started
Author

Konrad Kwiatkowski

Observed names: K. Kwiatkowski, KONRAD KWIATKOWSKI, Kwiatkowski, Konrad
ORCID: 0000-0002-9013-0719
Observed ORCID: 0000-0002-9013-0719
OpenAlex ID: A5029310502
XPS and FTIR Studies of Polytetrafluoroethylene Thin Films Obtained by Physical Methods
2019 · Joanna Piwowarczyk, Roman Jędrzejewski, et al. · Polymers · 215
PDF
Friction and deformation behaviour of human skin
2009 · M. Kwiatkowska, S.E. Franklin, et al. · Wear · 126
Fully biobased multiblock copolymers of furan-aromatic polyester and dimerized fatty acid: Synthesis and characterization
2016 · Magdalena Kwiatkowska, Inez Kowalczyk, et al. · Polymer · 69
The Abrasive Wear Resistance of the Segmented Linear Polyurethane Elastomers Based on a Variety of Polyols as Soft Segments
2017 · Konrad Kwiatkowski, Małgorzata Nachman · Polymers · 60
PDF
Synthesis and structure – property relationship of biobased poly(butylene 2,5-furanoate) – block – (dimerized fatty acid) copolymers
2017 · Magdalena Kwiatkowska, Inez Kowalczyk, et al. · Polymer · 49
Structure and properties of nanocomposites based on PTT-block-PTMO copolymer and graphene oxide prepared by in situ polymerization
2013 · Sandra Paszkiewicz, Anna Szymczyk, et al. · European Polymer Journal · 40
PDF
Experimental Studies of an Asymmetric Multi-Bolted Connection under Monotonic Loads
2021 · Rafał Grzejda, Arkadiusz Parus, et al. · Materials · 31
PDF
Chemical Structure of EVA Films Obtained by Pulsed Electron Beam and Pulse Laser Ablation
2019 · Agata Niemczyk, Dariusz Moszyński, et al. · Polymers · 21
PDF
Microstructure and Mechanical/Elastic Performance of Biobased Poly (Butylene Furanoate)–Block–Poly (Ethylene Oxide) Copolymers: Effect of the Flexible Segment Length
2020 · Magdalena Kwiatkowska, Inez Kowalczyk, et al. · Polymers · 19
PDF
Study of the Impact of Surface Topography on Selected Mechanical Properties of Adhesive Joints
2024 · Małgorzata Sługocka, Daniel Grochała, et al. · Coatings · 17
PDF
Comparison of Dental Zirconium Oxide Ceramics Produced Using Additive and Removal Technology for Prosthodontics and Restorative Dentistry—Strength and Surface Tests: An In Vitro Study
2023 · Wojciech Frąckiewicz, Marcin Królikowski, et al. · Materials · 15
PDF
The effect of thermal annealing on the abrasion resistance of a segmented block copolymer urethane elastomers
2013 · Małgorzata Nachman, Konrad Kwiatkowski · Wear · 15
Influence of Chemical Composition on Structure and Mechanical Properties of Vacuum-Carburized Low-Alloy Steels
2024 · Paweł Kochmański, Renata Chylińska, et al. · Materials · 8
Polytetrafluoroethylene thin films obtained by the pulsed electron beam deposition method at different gas pressures
2017 · Roman Jedrzejewski, Joanna Piwowarczyk, et al. · Polimery · 7
Experimental and Numerical Investigations of an Asymmetric Multi-Bolted Connection Preloaded and Subjected to Monotonic Loads
2023 · R. Grzejda, K. Kwiatkowski, et al. · International Applied Mechanics · 6
PDF
Analysis of structural changes in injection‐molded parts due to cyclic loading
2017 · Elzbieta Bociaga, Monika Kula, et al. · Advances in Polymer Technology · 6
Abrasive wear of urethane elastomers based on monomeric or polymeric diisocyanate MDI
2012 · PAWEL MICHALSKI, MALGORZATA NACHMAN, et al. · Polimery · 6
PDF
Poly(propylene)/carbon composite thin films obtained by pulsed electron‐beam deposition
2018 · Roman Jędrzejewski, Joanna Piwowarczyk, et al. · Plasma Processes and Polymers · 5
Investigation of the influence of natural fillers on the properties of samples obtained using additive manufacturing technology
2025 · Marta Beata Krawczyk, Rafał Przybylski, et al. · Advances in Science and Technology – Research Journal · 3
PDF
Epoxy Composites with Post-Production Gray Cast-Iron Powders
2024 · Robert Cieślak, Paweł Figiel, et al. · Materials · 2
Modelling of Multi-Bolted Systems at the Pretension Stage – Part 1: Mechanical Characteristics of the Contact between the Joined Elements
2024 · R. Grzejda, K. Kwiatkowski · Archives of Metallurgy and Materials · 2
PDF
Ocena degradacji elastomerów estrowych na podstawie wskaźnika szybkości płynięcia MFR
2012 · Konrad Kwiatkowski, M. Kwiatkowska · Inżynieria Materiałowa · 2
In Vitro Mechanical Evaluation of Prosthodontic Dental Acrylics Fabricated by Conventional and Additive Techniques
2026 · Paweł Szymlet, Wojciech Frąckiewicz, et al. · Materials · 1
PDF
Study of welding of poly(ether-ester) elastomers. Part I. Influence of contents of flexible segments on morphology and mechanical properties
2004 · KONRAD KWIATKOWSKI, ZBIGNIEW ROSLANIEC · Polimery · 1
KNOWLEDGE-DRIVEN CHARACTERIZATION OF α′-MARTENSITE DETECTION IN AUSTENITIC STEEL VIA MAGNETIC RESPONSE ANALYSIS
2026 · Psuj, Grzegorz, Ducharne, Benjamin, et al. · HAL
Works count: 33
Citation count: 726
H-index: 12
I10-index: 12
Year
Topic
Type