Product
Help
Pricing
About
Jobs
Log in
Get started
Author
Add to collection
P. Marimuthu
Observed names:
Marimuthu Ponnusamy,
P Marimuthu,
P. MARIMUTHU,
Ponnusamy Marimuthu
Institution:
SASTRA University
Observed institutions:
National Institute of Technology Tiruchirappalli,
Indian Institute of Technology Madras,
Anna University, Chennai,
Sona College of Technology,
SASTRA University
ORCID:
0000-0002-9645-8969
Observed ORCID:
0000-0002-9645-8969
OpenAlex ID:
A5029559472
Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method
2007
·
A. Noorul Haq
, P. Marimuthu
, et al.
·
The International Journal of Advanced Manufacturing Technology
·
375
Dry sliding wear behaviour of zinc oxide reinforced magnesium matrix nano-composites
2014
·
B. Selvam
, P. Marimuthu
, et al.
·
Materials & Design (1980-2015)
·
156
Experimental investigation and optimization of abrasive water jet cutting parameters for the improvement of cut quality in carbon fiber reinforced plastic laminates
2017
·
B Jagadeesh
, P Dinesh Babu
, et al.
·
Journal of Industrial Textiles
·
50
Investigation of load carrying capacity of asymmetric high contact ratio spur gear based on load sharing using direct gear design approach
2015
·
P. Marimuthu
, G. Muthuveerappan
·
Mechanism and Machine Theory
·
40
Contact fatigue life estimation for asymmetric helical gear drives
2022
·
S. Rajesh
, P. Marimuthu
, et al.
·
International Journal of Fatigue
·
33
Effects of Dual-Phase Reinforcement Particles (Fly Ash + Al2O3) on the Wear and Tensile Properties of the AA 7075 Al Alloy Based Composites
2019
·
T. Ram Prabhu
, M. Murugan
, et al.
·
Journal of The Institution of Engineers (India) Series D
·
29
Experimental studies of laser borided low alloy steel and optimization of parameters using response surface methodology
2019
·
S. Sashank
, P. Dinesh Babu
, et al.
·
Surface and Coatings Technology
·
29
Status of laser transformation hardening of steel and its alloys: a review
2019
·
Purushothaman Dinesh Babu
, Ponnusamy Marimuthu
·
Emerging Materials Research
·
27
Design of asymmetric normal contact ratio spur gear drive through direct design to enhance the load carrying capacity
2015
·
P. Marimuthu
, G. Muthuveerappan
·
Mechanism and Machine Theory
·
25
Effect of sintering temperature and time intervals on workability behaviour of Al–SiC matrix P/M composite
2011
·
J. Bensam Raj
, P. Marimuthu
, et al.
·
The International Journal of Advanced Manufacturing Technology
·
25
Investigation of Crystallographic Orientation and Mechanical Behaviour in Laser-Welded Stainless Steel 316L Additive Components
2022
·
S. Pradeep Kumar
, V. Chakkravarthy
, et al.
·
Transactions of the Indian Institute of Metals
·
22
Optimal Setting of Machining Parameters for Turning Inconel 625 Using Coated Tool
2014
·
P. Marimuthu
, R. Baskaran
·
Applied Mechanics and Materials
·
20
Effect of temperature and strain rate on compressive response of extruded magnesium nano-composite
2015
·
B. Selvam
, P. Marimuthu
, et al.
·
Journal of Magnesium and Alloys
·
19
Laser surface texturing inhibits Biofilm formation
2021
·
Venkata Sai Prabhu Suraj Nanduru
, Nagalla Siva Ramakrishna
, et al.
·
Materials Chemistry and Physics
·
18
Investigation of fracture behaviour of asymmetric spur gear
2021
·
Nandu V. Namboothiri
, P. Marimuthu
·
Theoretical and Applied Fracture Mechanics
·
17
Microstructure, wear and mechanical properties of plasma sprayed TiO2 coating on Al–SiC metal matrix composite
2019
·
P. Dinesh Babu
, B. Prasannakumar
, et al.
·
Archives of Civil and Mechanical Engineering
·
17
Fracture characteristics of asymmetric high contact ratio spur gear based on strain energy release rate
2022
·
Nandu V. Namboothiri
, P. Marimuthu
·
Engineering Failure Analysis
·
15
Effect of Heat Sink and Cooling Mediums on Ferrite Austenite Ratio and Distortion in Laser Welding of Duplex Stainless Steel 2205
2019
·
P. Dinesh Babu
, P. Gouthaman
, et al.
·
Chinese Journal of Mechanical Engineering
·
14
PDF
Multi-response optimization of turning parameters for machining glass fiber–reinforced plastic composite rod
2015
·
P Raveendran
, P Marimuthu
·
Advances in Mechanical Engineering
·
14
Influence of drive side pressure angle on fracture characteristics of asymmetric spur gear
2021
·
Nandu V. Namboothiri
, P. Marimuthu
·
Engineering Failure Analysis
·
12
Optimization of contact stress for the high contact ratio spur gears achieved through novel hob cutter
2022
·
S. Rajesh
, P. Marimuthu
, et al.
·
Forschung im Ingenieurwesen
·
11
Laser Welding of ZE41 Mg Alloy: Experimental Investigations on the Effect of Parameters and Nondestructive Testing
2020
·
P. Marimuthu
, P. Dinesh Babu
, et al.
·
Transactions of the Indian Institute of Metals
·
11
Experimental Investigations on Magnetically Impelled Arc Butt Welded T91 Steel Tubes
2017
·
S. Vignesh
, P. Dinesh Babu
, et al.
·
Transactions of the Indian Institute of Metals
·
11
Optimization of fillet stress to enhance the bending strength through non-standard high contact ratio spur gears
2015
·
P Marimuthu
, G Muthuveerappan
·
Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
·
11
Optimum Profile Shift Estimation on Direct Design Asymmetric Normal and High Contact Ratio Spur Gears Based on Load Sharing
2014
·
P. Marimuthu
, G. Muthuveerappan
·
Procedia Engineering
·
11
PDF
Show more works
View as search
Works count:
59
Citation count:
1,109
H-index:
16
I10-index:
27
Year
Topic
Type
