Get started
Author

Stefan Brenner

Observed names: Brenner, Stefan, S. Brenner
ORCID: 0000-0001-5244-7072
Observed ORCID: 0000-0001-5244-7072
OpenAlex ID: A5029598528
Recoater crashes during powder bed fusion of metal with laser beam: simulative prediction of interference and experimental evaluation of resulting part quality
2023 · Stefan Brenner, Martin Moser, et al. · Progress in Additive Manufacturing · 22
PDF
Additive Manufacturing of Side-Coupled Cavity Linac Structures from Pure Copper: A First Concept
2023 · Michael Mayerhofer, Stefan Brenner, et al. · Instruments · 10
PDF
Geometrical Benchmarking of Laser Powder Bed Fusion Systems Based on Designer Needs
2021 · Joaquin Montero, Sebastian Weber, et al. · Proceedings of the Design Society · 10
PDF
Red and Green Laser Powder Bed Fusion of Pure Copper in Combination with Chemical Post-Processing for RF Cavity Fabrication
2024 · Michael Mayerhofer, Stefan Brenner, et al. · Instruments · 9
Effect of a process interruption on the mechanical properties of AlSi10Mg components produced by laser powder bed fusion (PBF-LB/M)
2024 · M. Moser, S. Brenner, et al. · Progress in Additive Manufacturing · 7
PDF
Improving Fabrication and Performance of Additively Manufactured RF Cavities by Employing Co-Printed Support Structures and Their Subsequent Removal
2024 · Michael Mayerhofer, Stefan Brenner, et al. · Instruments · 7
PDF
Joining technology of additively manufactured components: effects on the bonding strength for the adhesive application through inner channels
2023 · Michael Ascher, Stefan Brenner, et al. · Progress in Additive Manufacturing · 7
PDF
Influence and handling of process interruptions in PBF-LB of AlSi10Mg
2025 · M. Moser, S. Brenner, et al. · Progress in Additive Manufacturing · 5
A radio-frequency quadrupole prototype additively manufactured as a multi-material component
2025 · Stefan Brenner, Marcel Dickmann, et al. · Progress in Additive Manufacturing · 4
PDF
Experimental and Numerical Study on the Temperature-Dependent Tensile Properties of AlSi10Mg Fabricated by Laser-Based Powder Bed Fusion
2025 · Stefan Brenner, Vesna Nedeljkovic-Groha · Advanced structured materials · 3
Distortion Compensation of Thin-Walled Parts by Pre-Deformation in Powder Bed Fusion with Laser Beam
2024 · Stefan Brenner, Vesna Nedeljkovic-Groha · Advanced structured materials · 3
Advanced RF cavity manufacturing using multi-material laser powder bed fusion
2026 · Michael Mayerhofer, Stefan Brenner, et al. · The European Physical Journal Special Topics · 1
PDF
Effect of the top layer scanning on residual stresses and distortions in AlSi10Mg cantilevers fabricated by laser powder bed fusion
2026 · Stefan Brenner, Alexandra Widuch, et al. · Progress in Additive Manufacturing · 1
PDF
Improving Vertical Dimensional Accuracy in PBF-LB/M Through Artefact-Based Evaluation and Correction
2025 · Stefan Brenner, Vesna Nedeljkovic-Groha · Applied Sciences · 1
PDF
Automated Disinformation and Malicious AI Swarms: Risks for Democracy and Development in Africa
2026 · Schroeder, Daniel Thilo, Lutscher, Philipp M., et al. · arXiv (Cornell University)
PDF
Comparison of post-processing methods for additively manufactured pure copper RF cavities: Evaluation of dimensional accuracy, vacuum outgassing and effective electrical conductivity
2026 · Michael Mayerhofer, Alexander Arndt, et al. · The International Journal of Advanced Manufacturing Technology
PDF
Impact of PBF-LB/M process parameters on the effective electrical conductivity of AlSi10Mg specimens
2026 · Sebastian Putz, Stefan Brenner, et al. · Progress in Additive Manufacturing
PDF
Publisher Correction: Effect of the top layer scanning on residual stresses and distortions in AlSi10Mg cantilevers fabricated by laser powder bed fusion
2026 · Stefan Brenner, Alexandra Widuch, et al. · Progress in Additive Manufacturing
PDF
Advanced RF cavity manufacturing using multi-material laser powder bed fusion
2026 · Mayerhofer, Michael, Brenner, Stefan, et al. · Fraunhofer-Publica (Fraunhofer-Gesellschaft)
Effect of Heat Treatment on the Hardness of Unconventional Geometrical Features for Laser Powder Bed Fused AlSi10Mg
2022 · L. Strauß, J. Montero, et al. · Proceedings of the Design Society
PDF
Works count: 24
Citation count: 94
H-index: 7
I10-index: 3
Year
Topic
Type