Author

Adam Faircloth

Observed names: A. Faircloth, Faircloth A, Faircloth, A., Faircloth, Adam, Faircloth, Adam D

Institutions: Griffith University, Department of Primary Industries

Observed institutions: Griffith University, Australian National University, The University of Queensland, Queensland Government, Department of Primary Industries, National University of Laos

ORCID: 0009-0001-1778-1929

Observed ORCID: 0009-0001-1778-1929

OpenAlex ID: A5030193013

A comparative study on the mechanical properties of laminated veneer lumber (LVL) produced from blending various wood veneers

2019 · Robert L. McGavin, Hoan H. Nguyen, et al. · BioResources · 22

Vibration of Timber and Hybrid Floors: A Review of Methods of Measurement, Analysis, and Design

2023 · Hassan Karampour, Farid Piran, et al. · Buildings · 21

The effects of drying method on the wood permeability, wettability, treatability, and gluability of southern pine from Australia

2020 · William Leggate, Chandan Kumar, et al. · BioResources · 15

The influence of mechanical surface preparation method, adhesive type, and curing temperature on the bonding of Darwin stringybark

2020 · William Leggate, Robert L. McGavin, et al. · BioResources · 14

Influence of mechanical surface preparation methods on the bonding of southern pine and spotted gum: Tensile shear strength of lap joints

2020 · William Leggate, Robert L. McGavin, et al. · BioResources · 12

Understanding the adhesion performance of glued laminated timber manufactured with Australian softwood and high-density hardwood species

2024 · A. Faircloth, B. P. Gilbert, et al. · European Journal of Wood and Wood Products · 11

Determining acoustic and mechanical properties of Australian native hardwood species for guitar fretboard production

2020 · Maryam Shirmohammadi, Adam Faircloth, et al. · European Journal of Wood and Wood Products · 11

Assessment of sound quality: Australian native hardwood species for guitar fretboard production

2021 · Maryam Shirmohammadi, Adam Faircloth, et al. · European Journal of Wood and Wood Products · 10

Mechanical Performance and Bond Integrity of Finger Jointed High-Density Sub-Tropical Hardwoods for Residential Decking

2023 · Adam Faircloth, Chandan Kumar, et al. · Forests · 8

Effect of Alternate Drying Techniques on Cross-Laminated Timber after Exposure to Free-Water Wetting

2023 · Maryam Shirmohammadi, Adam Faircloth · Forests · 6

Experimental Modal Analysis of Appropriate Boundary Conditions for the Evaluation of Cross-Laminated Timber Panels for an In-Line Approach

2021 · Adam Faircloth, Loic Brancheriau, et al. · Forest Products Journal · 6

Investigating Factors Influencing Rolling Shear Performance of Australian CLT Feedstock

2023 · Chandan Kumar, Adam Faircloth, et al. · Forests · 5

Global state of knowledge on human-induced sound and vibration events: defining future research directions for mass timber products

2025 · Adam Faircloth, Hassan Karampour, et al. · Journal of Wood Science · 4

Evaluation of full-sized and thick cross-laminated timber using in-line non-destructive techniques

2023 · Adam Faircloth, Loic Brancheriau, et al. · Wood Material Science and Engineering · 4

Impact of continuous drying method on drying quality of southern pine sawn timber

2021 · Chandan Kumar, Adam Faircloth, et al. · BioResources · 3

Dynamic behaviour and serviceability performance of long-span CLT band-beam floor systems: Full-scale experimental study

2026 · Adam Faircloth, Hassan Karampour, et al. · Structures · 1

Correction: Global state of knowledge on human-induced sound and vibration events: defining future research directions for mass timber products

2026 · Adam Faircloth, Hassan Karampour, et al. · Journal of Wood Science · 1

Design Uncertainty in Long Span Mass Timber Floors: Proposed Band-beam Solution

2025 · Adam Faircloth, Hassan Karampour, et al. · World Conference on Timber Engineering (WCTE) · 1

Assessment of termite damage in cross-laminated timber sections using micro-computed tomography and vibration analysis

2023 · Maryam Shirmohammadi, Adam Faircloth, et al. · BioResources · 1

Rethinking engineered wood product manufacturing: opportunities for using partially seasoned timber feedstocks

2026 · Adam Faircloth, Thomas E. Davies, et al. · European Journal of Wood and Wood Products

Impact of termite-induced damage on the mechanical performance of timber

2026 · Hassan, Babar, Faircloth, Adam, et al. · Queensland Department of Agriculture and Fisheries archive of scientific and research publications (Queensland Department of Agriculture and Fisheries)

Correction : Global state of knowledge on human-induced sound and vibration events: defining future research directions for mass timber products (Journal of Wood Science, (2025), 71, 1, (71), 10.1186/s10086-025-02247-4)

2026 · Adam Faircloth, Hassan Karampour, et al. · Newcastle University ePrints (Newcastle Univesity)

Global state of knowledge on human-induced sound and vibration events : defining future research directions for mass timber products

2026 · Faircloth, Adam, Karampour, Hassan, et al. · OPUS Publication Server of the University of Stuttgart (University of Stuttgart)

Field and Laboratory Evaluation of Vibration Performance and Occupant Perception in Mass Timber Floor Systems

2026 · Adam Faircloth, Hassan Karampour, et al. · SSRN Electronic Journal

The Global Perception and Understanding of Vibration and Acoustics in Timber Structures

2025 · Faircloth, Adam, Department of Primary Industries, Queensland · Queensland Department of Agriculture and Fisheries archive of scientific and research publications (Queensland Department of Agriculture and Fisheries)

Works count: 36

Citation count: 157

H-index: 8

I10-index: 8