Get started
Author

Filip Lenrick

Observed names: Dr Filip Lenrick, F Lenrick, F. Lenrick, LENRICK Filip, Lenrick Filip, Lenrick, F., Lenrick, Filip
ORCID: 0000-0001-6969-1215
Observed ORCID: 0000-0001-6969-1215
OpenAlex ID: A5030537453
Performance of ZrO 2 -supported Nb- and W-oxide in the gas-phase dehydration of glycerol to acrolein
2012 · Mariano Massa, Arne Andersson, et al. · Journal of Catalysis · 119
Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining
2021 · Rebecka Lindvall, Filip Lenrick, et al. · Wear · 90
Performance and wear mechanisms of PCD and pcBN cutting tools during machining titanium alloy Ti6Al4V
2020 · Rebecka Lindvall, Filip Lenrick, et al. · Wear · 88
Characterization of White Layer Generated when Turning Aged Inconel 718
2011 · V. Bushlya, J.M. Zhou, et al. · Procedia Engineering · 79
PDF
LaCoO3: Promising cathode material for protonic ceramic fuel cells based on a BaCe0.2Zr0.7Y0.1O3−δ electrolyte
2012 · Sandrine Ricote, Nikolaos Bonanos, et al. · Journal of Power Sources · 78
High-Frequency Performance of Self-Aligned Gate-Last Surface Channel $\hbox{In}_{0.53}\hbox{Ga}_{0.47}\hbox{As}$ MOSFET
2012 · Mikael Egard, Lars Ohlsson, et al. · IEEE Electron Device Letters · 74
Scanning 3DXRD Measurement of Grain Growth, Stress, and Formation of Cu6Sn5 around a Tin Whisker during Heat Treatment
2019 · Johan Hektor, Stephen A. Hall, et al. · Materials · 64
PDF
High transconductance self-aligned gate-last surface channel In0.53Ga0.47As MOSFET
2011 · M. Egard, L. Ohlsson, et al. · Technical digest - International Electron Devices Meeting/Technical digest · 61
InGaN Platelets: Synthesis and Applications toward Green and Red Light-Emitting Diodes
2019 · Zhaoxia Bi, Filip Lenrick, et al. · Nano Letters · 58
Influence of oxygen on the tool wear in machining
2018 · Volodymyr Bushlya, Filip Lenrick, et al. · CIRP Annals · 57
PDF
Tool wear mechanisms of PcBN in machining Inconel 718: Analysis across multiple length scale
2021 · Volodymyr Bushlya, Filip Lenrick, et al. · CIRP Annals · 56
Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite
2017 · Volodymyr Bushlya, Filip Lenrick, et al. · Wear · 53
PDF
Wear mechanisms of uncoated and coated cemented carbide tools in machining lead-free silicon brass
2017 · Volodymyr Bushlya, Daniel Johansson, et al. · Wear · 52
PDF
Evaluation of tool wear mechanisms and tool performance in machining single-phase tungsten
2020 · Mike Olsson, Volodymyr Bushlya, et al. · International Journal of Refractory Metals and Hard Materials · 47
On wear of TiAlN coated tools with and without NbN overlayer in machining titanium alloys
2024 · Rebecka Lindvall, Filip Lenrick, et al. · International Journal of Machine Tools and Manufacture · 44
Realization of Ultrahigh Quality InGaN Platelets to be Used as Relaxed Templates for Red Micro-LEDs
2020 · Zhaoxia Bi, Taiping Lu, et al. · ACS Applied Materials & Interfaces · 38
PDF
High In-content InGaN nano-pyramids: Tuning crystal homogeneity by optimized nucleation of GaN seeds
2018 · Zhaoxia Bi, Anders Gustafsson, et al. · Journal of Applied Physics · 37
Multicomponent binders for PcBN performance enhancement in cutting tool applications
2022 · Kateryna Slipchenko, Volodymyr Bushlya, et al. · Journal of the European Ceramic Society · 36
Thermodynamic modeling framework for prediction of tool wear and tool protection phenomena in machining
2021 · Axel Bjerke, Andrii Hrechuk, et al. · Wear · 34
Phase Transformation in Radially Merged Wurtzite GaAs Nanowires
2015 · Daniel Jacobsson, Fangfang Yang, et al. · Crystal Growth & Design · 34
PDF
On chemical and diffusional interactions between PCBN and superalloy Inconel 718: Imitational experiments
2019 · V. Bushlya, A. Bjerke, et al. · Journal of the European Ceramic Society · 33
FIB Plan and Side View Cross-Sectional TEM Sample Preparation of Nanostructures
2013 · Filip Lenrick, Martin Ek, et al. · Microscopy and Microanalysis · 33
Synthesis by spark plasma sintering of a novel protonic/electronic conductor composite: BaCe0.2Zr0.7Y0.1O3−δ /Sr0.95Ti0.9Nb0.1O3−δ (BCZY27/STN95)
2013 · Jason S. Fish, Sandrine Ricote, et al. · Journal of Materials Science · 32
Wear mechanisms of PcBN tools when machining AISI 316L
2021 · Henrik Persson, Filip Lenrick, et al. · Ceramics International · 27
Understanding wear and interaction between CVD α-Al2O3 coated tools, steel, and non-metallic inclusions in machining
2022 · Axel Bjerke, Filip Lenrick, et al. · Surface and Coatings Technology · 25
Works count: 88
Citation count: 1,741
H-index: 25
I10-index: 43
Year
Topic
Type