Get started
Author

Karl Dahm

Observed names: K L Dahm, K. L. Dahm, K.L Dahm, K.L. Dahm, KARL DAHM, Karl L Dahm, Karl L. Dahm, Karl Laurence Dahm
ORCID: 0000-0003-2670-4324
Observed ORCID: 0000-0003-2670-4324
OpenAlex ID: A5030794507
The corrosion–wear behaviour of thermally oxidised CP-Ti and Ti–6Al–4V
2003 · P.A Dearnley, K.L Dahm, et al. · Wear · 214
Oxidation behaviour of sputter-depositedNi–Cr–Al micro-crystalline coatings
1998 · Zhenyu Liu, Wei Gao, et al. · Acta Materialia · 199
COD and nitrogen removal by biofilms growing on gas permeable membranes
2003 · Michael J. Semmens, Karl Dahm, et al. · Water Research · 196
The effect of coating grain size on the selective oxidation behaviour of Ni-Cr-Al alloy
1997 · Zhenyu Liu, Wei Gao, et al. · Scripta Materialia · 87
Corrosion and passivation mechanism of chromium diboride coatings on stainless steel
2004 · Larry R. Jordan, Anthony J. Betts, et al. · Corrosion Science · 77
Magnetron sputter deposition of chromium diboride coatings
1998 · K.L Dahm, L.R Jordan, et al. · Surface and Coatings Technology · 69
S Phase Coatings Produced by Unbalanced Magnetron Sputtering
1996 · K. L. Dahm, P. A. Dearnley · Surface Engineering · 44
Improved Oxide Spallation Resistance of Microcrystalline Ni-Cr-Al Coatings
1998 · Zhenyu Liu, Wei Gao, et al. · Oxidation of Metals · 40
On the Nature, Properties and Wear Response of S-phase (nitrogen-alloyed Stainless Steel) Coatings on Aisi 316l
2000 · K L Dahm, P A Dearnley · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 37
Characterisation and wear response of metal-boride coated WC–Co
2005 · Peter A Dearnley, Martin Schellewald, et al. · Wear · 33
Characterisation of nitrogen-bearing surface layers on Ni-base superalloys
2007 · K.L. Dahm, K.T. Short, et al. · Wear · 29
Abrasion response and abrasion–corrosion interactions for a coated biomedical stainless steel
2005 · K.L. Dahm, P.A. Dearnley · Wear · 24
Hard coatings for orthopedic implants
1995 · K. L. Dahm, I. A. Anderson, et al. · Surface Engineering · 23
The damage tolerance of S-phase coated biomedical grade stainless steel
2007 · C. Gabriel Figueiredo Pina, Karl L. Dahm, et al. · Wear · 16
CORROSION AND WEAR RESPONSE OF Cr–B COATED 316L AUSTENITIC STAINLESS STEEL
1997 · P. A. Dearnley, N. Dortmann, et al. · Surface Engineering · 16
Modelling the impact of crushing on the strength performance of corrugated fibreboard
2020 · Mohamad Aiman Jamsari, Celia Kueh, et al. · Packaging Technology and Science · 13
Chemical structure and corrosion behaviour of S phase coatings
2009 · K. L. Dahm, A. J. Betts, et al. · Surface Engineering · 13
Hardness Characterisation of Thin Carbon Coatings
1994 · K. L. Dahm, W. G. Ferguson, et al. · Surface Engineering · 13
Production of TiFe Hydrogen-Storage Material by Direct Reduction of Ilmenite Mineral Sand
2025 · M. Zarar Rasheed, Alexander Haack, et al. · ACS Applied Energy Materials · 12
PDF
Experimental and numerical performance of corrugated fibreboard at different orientations under four‐point bending test
2019 · Mohamad Aiman Jamsari, Celia Kueh, et al. · Packaging Technology and Science · 12
Direct observation of the interface during sliding tribo-corrosion
2007 · K.L. Dahm · Tribology International · 11
Fatigue-like failure of thermally oxidised titanium in reciprocating pin-on-plate wear tests
2009 · K.L. Dahm · Wear · 10
Tribological effects on subsurface interfaces
2007 · K. L. Dahm, E Torskaya, et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · 9
Digital image correlation analysis of vertical strain for corrugated fiberboard box panel in compression
2019 · Celia S. L. Kueh, Karl Dahm, et al. · Packaging Technology and Science · 8
The Structure and Properties of Magnetron Sputtered Fe-Cr-Ni Coatings Containing Sigma Phase
2007 · Bertram Mallia, Karl L. Dahm, et al. · Plasma Processes and Polymers · 8
Works count: 48
Citation count: 1,272
H-index: 15
I10-index: 22
Year
Topic
Type