Get started
Author

David Levasseur

Observed names: D. Levasseur, Levasseur, David
OpenAlex ID: A5031289811
Pressureless sintering of cold sprayed Inconel 718 deposit
2012 · D. Levasseur, S. Yue, et al. · Materials Science and Engineering A · 55
Supersolidus Liquid Phase Sintering Modeling of Inconel 718 Superalloy
2015 · David Levasseur, Mathieu Brochu · Metallurgical and Materials Transactions A · 26
Effect of Inclusions on the Tensile Properties Inside a LPPM A356 Casting
2016 · Franco Chiesa, David Levasseur, et al. · International Journal of Metalcasting · 8
Tensile creep testing of an Al–Cu alloy above solidus with a dynamic mechanical analyser
2011 · D. Levasseur, D. Larouche · Materials Science and Engineering A · 7
Effect of Heating Rate on the Pressureless Sintering Densification of a Nickel-Based Superalloy
2016 · David Levasseur, Mathieu Brochu · Metallurgical and Materials Transactions A · 6
Interparticle Liquid Film Formation during Spark Plasma Sintering of Inconel 718 Superalloy
2011 · David Levasseur, Mathieu Brochu · Advanced materials research · 3
Effects of impeller stirring time and EEM stirring speed on the microstructural characteristics of modified A356 alloy slurries in the RheoMetal™ process
2026 · Rasoul Khajeh, David Levasseur, et al. · Journal of Materials Research and Technology · 2
Measuring the Effective Heat Transfer Coefficients at the Mold–Metal Interface in Permanent Mold for the Purpose of Solidification Modeling
2025 · Franco Chiesa, David Levasseur, et al. · International Journal of Metalcasting · 2
Measuring the Effective Heat Transfer Coefficients at the Mold–Metal interface in a Sand Casting for the Purpose of Solidification Modeling
2026 · Franco Chiesa, Jimmy Simard, et al. · International Journal of Metalcasting
Temperature Losses in Cups of Tilt-Poured Permanent Molds
2025 · Franco Chiesa, David Levasseur, et al. · International Journal of Metalcasting
Bondcoat, Surface Preparation and Coating Thickness
2019 · David Levasseur · International Thermal Spray Conference and Exposition (ITSC)
Tailoring Thermal Properties of Plasma Spray Ceramic Coatings for Aluminum Molding
2019 · David Levasseur, Jimmy Simard, et al. · Thermal spray
Study of the Endurance Limit of AA7075 Aluminum Produced by High-Pressure Vacuum Die Casting Analyzed by Classical Whöler Curve
2017 · David Levasseur, Jimmy Simard, et al. · Springer eBooks
Casting ASTM B108 Tensile Test Bars with Improved Repeatability
2015 · David Levasseur · 119th Metalcasting Congress
Comparing the SEED Semi-Solid Process to Low Pressure Permanent Mould in the Production of 4mm Thick Aluminum A356 Covers
2013 · Franco Chiesa, David Levasseur, et al. · Materials science forum
Works count: 16
Citation count: 109
H-index: 5
I10-index: 2
Year
Topic
Type