Get started
Author

Lincy Pyl

Observed names: L Pyl, L. Pyl, LINCY PYL, Pyl, L., Pyl, Lincy
Observed institutions: Université Libre de Bruxelles, Vrije Universiteit Brussel, Royal Military Academy, Ghent University, Innoviris, KU Leuven
ORCID: 0000-0001-7509-1718
Observed ORCID: 0000-0001-7509-1718
OpenAlex ID: A5031742328
Integration of LCA and LCC analysis within a BIM-based environment
2019 · Rúben Santos, António Aguiar Costa, et al. · Automation in Construction · 305
Microstructure and corrosion behavior of 316L stainless steel prepared using different additive manufacturing methods: A comparative study bringing insights into the impact of microstructure on their passivity
2020 · Reynier I. Revilla, Matthieu Van Calster, et al. · Corrosion Science · 188
BIM-based life cycle assessment and life cycle costing of an office building in Western Europe
2019 · Rúben Santos, António Aguiar Costa, et al. · Building and Environment · 171
Informetric analysis and review of literature on the role of BIM in sustainable construction
2019 · Rúben Santos, António Aguiar Costa, et al. · Automation in Construction · 169
Development of a BIM-based Environmental and Economic Life Cycle Assessment tool
2020 · Rúben Santos, António Aguiar Costa, et al. · Journal of Cleaner Production · 134
The influence of dynamic soil–structure interaction on traffic induced vibrations in buildings
2007 · S. François, L. Pyl, et al. · Soil Dynamics and Earthquake Engineering · 96
PDF
Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon matrix composites
2018 · Lincy Pyl, Kalliopi-Artemi Kalteremidou, et al. · Polymer Testing · 95
Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres
2021 · E. Polyzos, D. Van Hemelrijck, et al. · Composites Part B Engineering · 90
Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties
2021 · Babs Van de Voorde, Amalia Katalagarianakis, et al. · Additive manufacturing · 86
PDF
Air-blast response of sacrificial cladding using low density foams: Experimental and analytical approach
2017 · H. Ousji, B. Belkassem, et al. · International Journal of Mechanical Sciences · 76
Design of Built-Up Cold-Formed Steel Columns According to the Direct Strength Method
2012 · I. Georgieva, L. Schueremans, et al. · Procedia Engineering · 72
PDF
A multi-scale analytical methodology for the prediction of mechanical properties of 3D-printed materials with continuous fibres
2020 · E. Polyzos, A. Katalagarianakis, et al. · Additive manufacturing · 68
Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests
2018 · Lincy Pyl, Kalliopi-Artemi Kalteremidou, et al. · Composites Science and Technology · 66
Composed columns from cold-formed steel Z-profiles: Experiments and code-based predictions of the overall compression capacity
2012 · Iveta Georgieva, Luc Schueremans, et al. · Engineering Structures · 66
Experimental investigation of built-up double-Z members in bending and compression
2012 · Iveta Georgieva, Luc Schueremans, et al. · Thin-Walled Structures · 65
Delamination analysis of 3D-printed nylon reinforced with continuous carbon fibers
2021 · E. Polyzos, A. Katalagarianakis, et al. · Additive manufacturing · 58
Avoiding interpenetrations and the importance of nesting in analytic geometry construction for Representative Unit Cells of woven composite laminates
2016 · R.D.B. Sevenois, D. Garoz, et al. · Composites Science and Technology · 55
Explosive driven shock tube loading of aluminium plates: experimental study
2015 · M.A. Louar, B. Belkassem, et al. · International Journal of Impact Engineering · 55
Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan
2014 · Mathias Kersemans, Ives De Baere, et al. · Polymer Testing · 51
Detection and evaluation of cracks in the concrete buffer of the Belgian Nuclear Waste container using combined NDT techniques
2015 · S. Iliopoulos, D.G. Aggelis, et al. · Construction and Building Materials · 48
Modeling elastic properties of 3D printed composites using real fibers
2022 · E. Polyzos, D. Van Hemelrijck, et al. · International Journal of Mechanical Sciences · 44
Digital image correlation assisted characterization of Mode I fatigue delamination in composites
2020 · Man Zhu, Larissa Gorbatikh, et al. · Composite Structures · 43
Numerical study of built-up double-Z members in bending and compression
2012 · Iveta Georgieva, Luc Schueremans, et al. · Thin-Walled Structures · 43
Identification of the Elastic Properties of Isotropic and Orthotropic Thin-Plate Materials with the Pulsed Ultrasonic Polar Scan
2014 · M. Kersemans, A. Martens, et al. · Experimental Mechanics · 42
PDF
Fire safety analysis of a 3D frame structure based on a full-scale fire test
2012 · Lincy Pyl, Luc Schueremans, et al. · Thin-Walled Structures · 42
Works count: 235
Citation count: 3,433
H-index: 32
I10-index: 69
Year
Topic
Type