Author

Jingchuan Dong

Observed names: Dong Jing-chuan, Jing-Chuan Dong

Institution: Tianjin University

Observed institution: Tianjin University

OpenAlex ID: A5031810093

Smooth feedrate planning for continuous short line tool path with contour error constraint

2013 · Jingchuan Dong, Taiyong Wang, et al. · International Journal of Machine Tools and Manufacture · 92

NURBS Interpolator with Adaptive Smooth Feedrate Scheduling and Minimal Feedrate Fluctuation

2019 · Tai-Yong Wang, Yong-Bin Zhang, et al. · International Journal of Precision Engineering and Manufacturing · 44

Feedrate blending method for five-axis linear tool path under geometric and kinematic constraints

2021 · Yongbin Zhang, Taiyong Wang, et al. · International Journal of Mechanical Sciences · 27

Robust point cloud normal estimation via neighborhood reconstruction

2019 · Zhiqiang Yu, Taiyong Wang, et al. · Advances in Mechanical Engineering · 21

Fine-grained transfer learning based on deep feature decomposition for rotating equipment fault diagnosis

2023 · Jingchuan Dong, Depeng Su, et al. · Measurement Science and Technology · 19

Transfer learning rolling bearing fault diagnosis model based on deep feature decomposition and class-level alignment

2024 · Jingchuan Dong, Hongyu Jiang, et al. · Measurement Science and Technology · 18

An analytical G3 continuous corner smoothing method with adaptive constraints adjustments for five-axis machine tool

2020 · Yongbin Zhang, Taiyong Wang, et al. · The International Journal of Advanced Manufacturing Technology · 17

NURBS interpolator with pre-compensation based on discrete inverse transfer function for CNC high-precision machining

2022 · Taiyong Wang, Libo Cao, et al. · The International Journal of Advanced Manufacturing Technology · 12

PDF

Real-time exact contour error calculation of NURBS tool path for contour control

2020 · Zhe Liu, Jingchuan Dong, et al. · The International Journal of Advanced Manufacturing Technology · 11

A corner smoothing method with feedrate blending for linear segments under geometric and kinematic constraints

2020 · Yong-Bin Zhang, Tai-Yong Wang, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 11

A novel algorithm for complex transfer conditions in bearing fault diagnosis

2024 · Jingchuan Dong, Depeng Su, et al. · Measurement Science and Technology · 10

A multi-model method for tool wear prediction with deep temporal features and correlation alignment

2023 · Jingchuan Dong, Tao Chen, et al. · Measurement Science and Technology · 5

A two-stage tool wear prediction approach based on dual fusion of multi-feature and decision-making

2023 · Jingchuan Dong, Yubo Gao, et al. · The International Journal of Advanced Manufacturing Technology · 5

Tangential velocity tracking-based task coordinate frame approach for contouring control of biaxial motion systems

2023 · Runji Ke, Taiyong Wang, et al. · The International Journal of Advanced Manufacturing Technology · 5

An FPGA-based low-cost VLIW floating-point processor for CNC applications

2017 · Jingchuan Dong, Taiyong Wang, et al. · Microprocessors and Microsystems · 5

Research and Design of Motion Controller for CNC Based on Fuzzy PID Algorithm with Feedforward Control

2011 · Xianggui Ling, Qing Li, et al. · 5

Design and implementation of CNC controllers using reconfigurable hardware

2009 · Jingchuan Dong, Xingzhao Yang, et al. · International Conference on Control and Automation · 5

Enhancing propeller design with freeform contours through NURBS interpolation for 2D fabrication, CAD/CAM for 3D production, optimized with Taguchi method and artificial neural network

2025 · Usman Haladu Garba, Taiyong Wang, et al. · Results in Engineering · 4

Space cutter compensation method for five-axis nonuniform rational basis spline machining

2015 · Yanyu Ding, Taiyong Wang, et al. · Advances in Mechanical Engineering · 4

Applications of position controller for CNC machines based on state observer and Cross Coupled Controller

2010 · Liu Qing, Wang Tai-yong, et al. · International Conference on Computer, Mechatronics, Control and Electronic Engineering · 4

Design of reconfigurable CNC system based on embedded technology

2008 · Yue Xu, Taiyong Wang, et al. · World Congress on Intelligent Control and Automation · 4

Research and Design of Embedded Reconfigurable Mechatronics System Based on Field bus

2006 · Li Bo, Wang Tai-yong, et al. · 4

Three-dimensional iterative contour error estimation based on an orthogonal cross-coupled control approach

2024 · Runji Ke, Taiyong Wang, et al. · Journal of Mechanical Science and Technology · 3

A Direct Contour Control Method for Free-Form Surface Machining Trajectories Based on Coordinate Transformation

2024 · Zhe Liu, Tao Cui, et al. · Actuators · 3

Application of combined optimization strategy and system of CNC machining parameter

2022 · Hengli Liu, Yong Wang, et al. · Advances in Mechanical Engineering · 3

Works count: 31

Citation count: 347

H-index: 10

I10-index: 11